Jump to content
SAU Community

Coilpacks

uppon2

By uppon2,
in Four Door Family & Wagoneers

 Share

Recommended Posts

wolverine Grand Master

wolverine

Posted
Posted

If you take the time to do some searching many if not all of the questions you ask have already been asked and answered so assuming you do a search of SAU here is the one of the best links that should fix your issue very cheaply. If you take the time to add to these threads it remains as a quality database for the next person with the same issue.

http://www.skylinesaustralia.com/forums/in...t&p=3587533

Link to comment
https://www.sau.com.au/forums/topic/305793-coilpacks/#findComment-5058966
Share on other sites
mattye Rising Star

mattye

Posted
Posted

Mate I've got Splitfire packs in mine. When i was looking at doing the swap i talked to a couple of workshops and alot recomended superspark as a cheaper alternative to the splitfires. Haven't heard much about the yellow jackets, and also the JJR ones Just Jap sell so i would stear clear. unless someone can recomend them. but unless they have been in a car for a couple of years you cant realy give a good opinion.

Link to comment
https://www.sau.com.au/forums/topic/305793-coilpacks/#findComment-5059915
Share on other sites
pipster11 Grand Master

pipster11

Posted
Posted

i had jjr coilpacks in my 32

but it came with them so i dont know any difference from the stock ones

i've heard good things about the yellow jacket ones so i'd go with those as a cheap alternative

Link to comment
https://www.sau.com.au/forums/topic/305793-coilpacks/#findComment-5060894
Share on other sites
uppon2 Explorer

uppon2

Posted
  • Author
Posted

I have only heard good things about yellow jackets too so i reckon i will go for them

i had jjr coilpacks in my 32

but it came with them so i dont know any difference from the stock ones

i've heard good things about the yellow jacket ones so i'd go with those as a cheap alternative

Link to comment
https://www.sau.com.au/forums/topic/305793-coilpacks/#findComment-5061322
Share on other sites
dirtyRS4 Grand Master

dirtyRS4

Posted
Posted
Anybody got a set for sale? I have looked at yellow jackets, supersparks and spitfires but i am pretty broke

Try wolverines method and if that isnt effective try second hand factory items.

http://www.skylinesaustralia.com/forums/R3...ts-t305560.html

Mine were pretty rooted after 10+ years of use and I opted for the proven super direct ignition system and didnt stuff around with other inferior brands.

Link to comment
https://www.sau.com.au/forums/topic/305793-coilpacks/#findComment-5062615
Share on other sites
mattye Rising Star

mattye

Posted
Posted
Mine were pretty rooted after 10+ years of use and I opted for the proven super direct ignition system and didnt stuff around with other inferior brands.

Thats pretty much why i went for the Splitfire straight away. I know now that the will last the rest of the life of the car. No matter what mods.

Link to comment
https://www.sau.com.au/forums/topic/305793-coilpacks/#findComment-5065525
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Stock rb25det neo questions

      By GTSBoy · Posted

      Essentially, yes. Although I wouldn't put the AFM on the crossover pipe. I'd want to put it into what amounts to the correct size tube, which is more easily done in the intercooler pipework. I bought a mount tube for card stile AFM that replaces the stock AFM - although being a cheap AliExpress knockoff, it had not flange and I had to make and weld my own. But it is the same length and diameter as the stock RB AFM, goes on my airbox, etc etc. I don't have a sick enough rig to warrant anything different, and the swap will take 5 minutes (when I finally get around to it and the injectors & the dyno tune).
    • Wazmond
      Stock rb25det neo questions

      By Wazmond · Posted

      So to summarise, the best thing to do is to move recirc to between turbo and IC, and maf on the crossover pipe. Meaning I'd need a recirc flange, drill a hole in the piping on turbo outlet area. And drill hole on crossover to fit/weld maf sensor? Either that or put the MAF on the turbo inlet right?  Is an aftermarket recirc/blowoff valve recommended? Do currently have family in Japan so could probably bring something back with maybe a cheeky lil SuperAutobacs run?
    • tsuokun
      Lets play a game - What is causing my oil consumption?

      By tsuokun · Posted

      Yep, so far most have said that it looks like corrosion on the wall from piston not moving. Which then has probably damaged the oil rings and caused those vertical marks. The longest the engine was still after the rebuild, was the winter of 2018 - 2019, plus the boat trip to Japan. When I shipped the car, it had normal gas in the tank but before that winter pause, it had E85 in tank.  In any case, even if either one of those was the cause, it happened close to 6 years ago and the car has been driven something like 30 000kms after the fact. Again, apart from the plugs and the dip stick, there is nothing in the way the car runs that would indicate what has been going on in the engine. I am going to consult a shop and ask their opinion, what would be the best approach. I do have some access to a garage I could use to diagnose further myself, but time is very restrictive. Might end up buying another engine that could be used while this one is being remedied. Without pulling the head, it will be impossible to find out if it needs another bore, but here's to hoping a hone would suffice.  Goddamnit, I would really have preferred this not happening.  
    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      Boot is going to be replaced eventually. I just wire brushed what I could and rust converted. Then painted in rust kill primer. the spoiler also got repainted and plugs replaced on the ends. The under side of the bonnet is going to be black also, currently white. But red on the top side, same colour code as the silo to begin.
    • Shoota_77
      Car Rotisserie

      By Shoota_77 · Posted

      Hi guys, has anyone either purchased or built themselves a rotisserie for their car before? I can only just justify the need for one hence why I should just make one but at the same time, if I make one I can kiss another 4 weeks of potentially productive car working time goodbye because I'm building a bloody rotisserie....  I mainly want it for the application of the body deadener.  Cleaning the old stuff off, priming and then colour over the deadener doesn't worry me, it's just the application using the Schutz Gun that I feel would achieve a significantly better finish painting it side on and keeping the Schutz Gun upright.  I don't think they would work well on the side let alone almost upside down for some areas.  If the product I use (Terosun, etc) could work through a HVLP ok then it might be ok to apply without the rotisserie.   I can get one of these style ones for about $1200 which is pretty good value-     I reckon if I made one it would cost around $500 but it's more the time that it would take is more of a killer than the cost.  They look to hold their value pretty well second hand so I could always sell it after using it and realistically only lose $200-$300 at worst.  Or keep it and buy another project when this one finally sees the light of day... Anyone selling one...? Cheers!  
×
×
  • Create New...