Jump to content
SAU Community

Recommended Posts

  • Replies 193
  • Created
  • Last Reply

Top Posters In This Topic

Elf LMS is the control fuel Elf originally designed and made for Le Mans, it seems like a good brew. Makes good power, consistent, excellent quality and runs cooler which is all very logical stuff for turbo engines running in a 24 hour race.

Makes only a little less power than Turbomax, and is cheaper and not as nasty to use.

Originally posted by benm

I still find it quite weird how this topic hasn't appeared long ago if its deffinetly a seat of the pants power increase. What happens in 10,000km when someone has to do a rebuild because it doesn't work out like everyone states.

This stuff has been in use as a performance increase for years.

You used to be able to buy toluene from the pump, as my boss used to run 20% in his Mini Cooper S all the time.

As for adverse engine effects, if you use 20% or under, you should be fine without engine modifications.

Hot 4s did an article on this (probably about 10 years ago now) and recommended no higher than 20% without doing other stuff to your car.

As it burns hotter than normal fuel, you can burn out valves if you use too much, and I believe they recommended stainless valves if you were going to use it.

  • 5 weeks later...

2 questions...

1) What is the shelf life of toulene? ie) if I get 200L from shell or bp can I use 10L a week with every tank for 20 weeks - will the last 10L be just as good as the 1st 10L batch?

2) Do you have to shake it vigorously with petrol before hand to properly mix it? or can you just add it straight then add the petrol and will driving and cornering mix it up enough?

sorry for the questions - didn't do chem in school!

  • 2 months later...

So will there be any differences in the ways we can add toluene (other than method B being more time consuming)???

Method A: Go to a petrol station with an empty tank, first add petrol or toluene and than add the other.

Method B: Mix them at your garage, shake well :rofl: and than add to your petrol tank.

Also will a 95 octane petrol increased to 98 octane by using toluene be the same or as good as a genuine 98 octane petrol (optimax, bp, mobile )???

Some mechanic mentioned that a 95-96 octane petrol increased to 98 by using octane boosters wont be as good as geniune 98 petrol when tuning the car :confused:

Incidently if you want to use it legally as fuel you need to approach the appropriate? Gov dep. and arrange to pay the fuel exise to them on any amounts you buy. I don't know as yet if this applies when you are using it in small amounts as an octane booster. EDIT: It is sold as a solvent and as such does not attract fuel tax thats's why it is relativly cheap. If you use it as a fuel then you are legally required to contact the appropriate gov dept and pay them the fuel tax due on the amount you use as fuel. The only question is .... is an octane booster counted as fuel.

Surely if you were using it as an Octane Booster for Track use it would be exempt from fuel excise? It certainly couldnt be illegal on the track, could it?

REV210: Did you change the C.A.S? How many degrees, if any?

Toluene Octane Booster sounds good. I was talking about it with a friend of a friend 2 days ago, who is a Petro-Chemical Technician or something and he said you would only need a Cup-full to make a difference, I realise this conflicts with all of your mixture levels mentioned here, maybe he has been sniffing it too much :P I am glad somebody re-dredged this thread from the ether :( 10-20% sounds like a good level.

Any one tried it with Synergy 8000. I am able to run more timing @ 16psi compared to when I run BP98. BP98 causes the car to go flat for a sec then pics up and then goes flat again. Running less timing fixes the power loss/dip feeling but that isn't the point :D

A similar thing happens to my car with BP98, I have tried Synergy a couple of times and the problem is not noticeable... Synergy is further away and more expensive - as you mentioned.

Cheers.

So will there be any differences in the ways we can add toluene (other than method B being more time consuming)???

Method A: Go to a petrol station with an empty tank, first add petrol or toluene and than add the other.  

Method B: Mix them at your garage, shake well :( and than add to your petrol tank.

Also will a 95 octane petrol increased to 98 octane by using toluene be the same or as good as a genuine 98 octane petrol (optimax, bp, mobile )???

Some mechanic mentioned that a 95-96 octane petrol increased to 98 by using octane boosters wont be as good as geniune 98 petrol when tuning the car  :confused:

So no one knows???

So no one knows???

If you wait a bit, the original thread starter + others who have contributed to this topic will see it and perhaps provide input to your query.

Patience O-B-1, people are probably on holidays, like me :) [but not online].

:P

I am guessing that Method A would be the go.

How do you explain to them [at the servo] why you want to put 50 Litres of BP Ultimate 98 into a Jerry can...? For your supercharged ride-on lawn mower? Lol...

I don't think they would knowingly let you *mix up molotov corcktails* in your backyard.

:Bang:

BOOSTMEISTER

we ran a lexus v8 twin blown on c16 with great results, we ended up have 40 psi, 6:1 comp with 32 deg advanced with no det. used shit loads of fuel but sounded amazing. when we were turning this engine it didnt seem to perform untill we advanced the timing so far, something you might want to try next time Roy.

I'm also very interested in setting my car to use this fuel also, there was a article in some mag where they set up a gtr to run on c16, how ever i cant remember the results. From my memory c16 is made for forced induction engines. i would be extremly interested to hear your results if you go down this line. c16 does also have a slight lead content which will mean cleaning your 02 sensors.

Matty B

I am guessing that Method A would be the go.  

How do you explain to them [at the servo] why you want to put 50 Litres of BP Ultimate 98 into a Jerry can...? For your supercharged ride-on lawn mower? Lol...

I don't think they would knowingly let you *mix up molotov corcktails* in your backyard.

:Bang:

If you own oil manufacturing facilities it's quite possible to buy any chemical and petrol you want in bulk :D

And how about quality of 98RON vs 95RON+toluene ?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • BOVs do have a purpose, if you ever log pressure before and after the throttle body, you will see a spike pre throttle on lift off from a WOT condition. Enough to bend throttle blades / damage e-throttle motors or simple assist in blowing off cooler pipes. FWIW, the above on really applies to those running at least 2 bar of boost. OP shouldn't have an issue, on the other hand, here are some videos of my shit box over a decade ago with some succulent dose with the airbox on and off. That shit box is unrecognisable these days 🫠    
    • I've tried all different combinations of BOVs/ no BOV and stock bypass valves over the years, on gear changes the stock bypass valve seems to get the car back on boost quicker because in part the turbos wheel speed isn't being slowed down by reversion, although they have issues holding boost much over the stock setting. Most aftermarket BOVs you can adjust the spring, tighter will make it open later and close sooner, but in my experience it'll cause a bit of flutter at low load/rpm anyway. I've also got some input into this whole no bov causing turbo wear, never had an issue on any on my turbos HOWEVER, I got my R33 GTST with 200k kms on it, with from what I can see still has the original turbo, no lateral shaft play but has about 4-5mm of play in and out which to me seems like a worn thrust bearing from years (100-150k kms?) of turbo flutter running no bov, so maybe there is some truth to it in the long run. But that'll never stop me loving the Stutututu while I have the car.   OP just wants to know if he can run a atmo vented BOV with no major issues and the answer is YES, plenty of people do it, there's no harm in installing it and seeing how it runs before spending $$$ on an aftermarket ecu, last time I bought a Nistune it was $2400 for install and a tune , unsure of todays prices but you get me. Crazy money to spend just to fix the minor inconvenience of stalling that can be overcome by letting the revs come down to near idle before putting the clutch in or a little bit of throttle to avoid it. You're better off leaving the ecu and tune for after a bigger turbo/injectors have been installed to take full advantage of the tune and get your moneys worth.   Let OP have his Whoosh sound without trying to break his bank haha
    • I see you missed the rest of the conversation where they have benefits, but nothing to do with avoiding breaking turbos, which is what the aftermarket BOV made all the fan boys, tuners, and modders believe was the only purpose for them...
    • But they do so for the other reasons to have a compressor bypass. It's in the name.
×
×
  • Create New...