Jump to content
SAU Community

Recommended Posts

Hey guys, this is my first post so hello. I thought I'd join up on this site and get some good GTR info as well as post up the bits I have here and there. Moving on then. So here's my little paint project. Originally when I took delivery of the car, the front bumper had some slight damage on it. I was just going to repaint it silver, but somewhere along the way, I was asked by a close friend if they could try their hand at it. I knew this only meant things would get out of hand but I said okay. The artwork is by Allison La Valley of Lost Birds Art Studio (Portland, OR, USA) The car is in Misawa, Japan, where so far about 30 hours have gone into this. The plan is to finish the whole car by the end of February, so that will leave me time to build up the engine, etc before racing starts. I know some are going to hate that I allowed this, but remember it's just a car and as a matter of fact, there are 10s of 1,000s more just like it. Updates as they come!

pictures of the work so far.

Passenger Side Skirt

DSC_0016.jpg

DSC_0019.jpg

Driver Sideskirt Started

DSC_0034.jpg

mirrors

DSC_0038.jpg

DSC_0046.jpg

Rear

DSC_0041.jpg

Front

DSC_0036.jpg

DSC_0044.jpg

DSC_0042.jpg

The work goes on.....

Link to comment
https://www.sau.com.au/forums/topic/306096-lost-birds-r33-gtr/
Share on other sites

i think it doesnt look too bad from a distance, especially the first shot of the front bar

however i myself having a slightly similar car, picturing that shit drawn all over it makes me cringe!

though as said above, each to their own

istdercollen: That is super cool. Not to many people have the balls to take a sharpie to they're car. It's hard to stand out with a skyline these days.... Well done!

I cant wait to see the whole car done.

I've seen the Lambo around Miami... It's very unique, but if you get close- the detail is a little rough.

Looks very different, mate! And she's very talented! Good work.

Although it'd be difficult to get to, doing the roof would look fantastic.

The roof will be last but it will get done for sure! Here's a cell pic of the current state of my living room. Haha.

3fe548ea.jpg

istdercollen: That is super cool. Not to many people have the balls to take a sharpie to they're car. It's hard to stand out with a skyline these days.... Well done!

I cant wait to see the whole car done.

I've seen the Lambo around Miami... It's very unique, but if you get close- the detail is a little rough.

thanks for the props! Most people seem to think it's neat. No one has said it sucked to my face yet. Lol. Honestly the reason I decided to do it was because I didn't want a silver GTR at all. I couldn't get my hands on a Midnight Purple so I settled for what was easy to find set on repainting it from the first moment. I thought that I might as well let Allison do her thing and if it sucks then repaint as originally planned, no harm done. So that's the mindset.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As GTS mentioned, it takes a bit of faffing, some fiddling and a little modifying.  With the strainers, you can buy different styles. Some sit flat on the pump, some angle down.  Here are some photos of mine, ignore the ugly welds lol. 
    • The smart thing is to actually locate the pump at the right point down the hanger, so that the strainer can stay sticking out at a right angle, but near the bottom. This is the perpetual hassle with retrofitting any different pump to the factory hanger. Some just go where you need it to, some need fiddling and faffing, and modifying of stuff.
    • Some updates. After a lot of praying and some inspecting of crank threads, we've found that they were both kinda munted but nothing seemed terminal. The other option was drilling and helicoiling the crank. That is obviously the last option so we decided to at least try to get a OEM GM bolt in to GM Specs. So after honing/linishing the balancer from it's .002" interference fit to a .0018" to .0015" to .0013" it eventually slotted on to the crank. ATI state the interference is nominally 0.0007-0.0009... so it's still snugger than ATI reckon and explains the issues we had to fit the thing to begin with. New GM bolt went in at 37 ft/lb then torqued 140 degrees after which was EXTREMELY   but it tightened up to 140 degrees and it was a lot of force. So all things considered, the balancer is secured to the exact specs that GM want with the OEM Stretch bolt, (that ATI say you can use..) and the balancer itself is seated and snug AF. So WOO. Engine is now back in the car with lots of swearing. Bellhousing bolts done up, driver side manifold is on, AC Compressor and hard lines are back on the car. Next step will be to connect various engine bits/wiring/intake/radiator etc. Then oil and coolant and ... test start it? And of course, looking into this issue... which actually doesn't look so bad - It looks like it can be twisted back into shape with a set of multigrips. Anyone wanna buy my bonnet? Boy it looks good over there and sunk cost sucks.
    • Also this may be a stupid question, but how would you recommend getting the strainer on a downwards angle ? as they tend to obviously clip to the bottom of the pump which usually sits level 🥴
×
×
  • Create New...