Jump to content
SAU Community

Recommended Posts

Hi there..

Hey my R32 GTS-t has started trying to stall when cruising at about 100ks.. It hasnt done it a lot, but it gives ya a bit of a fright when your car tries to die as your driving it on the highway lol.. anyway, it seems to try and die when its cruising, not under any great load or anything.. the cars an auto, so no change in bov.. thinking it could be a fuel filter cause im not sure when it was last done, esp because of the way it drops power very fast for about 2 seconds and then comes right.. the thing im wondering here is most fuel filters ive seen are made of like a clear semi transperant plastic.. but the on in this car is quite an old looking silver tin one.. is there any chance it could still eb the factory one or something?

cheers

Link to comment
https://www.sau.com.au/forums/topic/306106-stalling/
Share on other sites

it could still be the factory one, but you will find that the replacement one will look pretty much identical. it would be worth replacing either way just to rule it out. sounds a bit weird that it is only doing it at light load. could also be an AFM issue, o2 sensor, AAC valve issue.

Link to comment
https://www.sau.com.au/forums/topic/306106-stalling/#findComment-5062163
Share on other sites

it could still be the factory one, but you will find that the replacement one will look pretty much identical. it would be worth replacing either way just to rule it out. sounds a bit weird that it is only doing it at light load. could also be an AFM issue, o2 sensor, AAC valve issue.

will look at changing the fuel filter and see what happens.. the only think ive changed recently is adding a full 3" turbo back exhaust.. but that was about 2000k's ago and its only started doing it now.. is there anyway way to check the o2, afm and aac valve?

Link to comment
https://www.sau.com.au/forums/topic/306106-stalling/#findComment-5062176
Share on other sites

will look at changing the fuel filter and see what happens.. the only think ive changed recently is adding a full 3" turbo back exhaust.. but that was about 2000k's ago and its only started doing it now.. is there anyway way to check the o2, afm and aac valve?

since the car was traveling at 80 -100km at the time of the drop, and so doing around 2.5 - 3k rpm, wouldnt that rule out the aac vavle? just trying to think of what might cause this so i have somehwere to start.. any input is welcome! cheers..

Link to comment
https://www.sau.com.au/forums/topic/306106-stalling/#findComment-5062207
Share on other sites

It won't be the AAC valve - that is only for idle control.

IT WILL NOT BE THE O2 SENSOR!!!!!!!!!!!!! A dead O2 sensor will not prevent the engine from running. It will simply cause an increase in fuel consumption (at worst).

It could be the fuel pump controller playing up. See if you can get a fuel pressure gauge set up and drive around a bit observing if fuel pressure has an effect.

The clear plastic fuel filters are for carburetted engines. They only need to withstand around 4psi pressure. All EFI engines run a metal canister fuel filter, so they can withstand the 3bar + fuel pressures.

Link to comment
https://www.sau.com.au/forums/topic/306106-stalling/#findComment-5063307
Share on other sites

It won't be the AAC valve - that is only for idle control.

IT WILL NOT BE THE O2 SENSOR!!!!!!!!!!!!! A dead O2 sensor will not prevent the engine from running. It will simply cause an increase in fuel consumption (at worst).

It could be the fuel pump controller playing up. See if you can get a fuel pressure gauge set up and drive around a bit observing if fuel pressure has an effect.

The clear plastic fuel filters are for carburetted engines. They only need to withstand around 4psi pressure. All EFI engines run a metal canister fuel filter, so they can withstand the 3bar + fuel pressures.

cheers for the help! gives me something solid to start on

Link to comment
https://www.sau.com.au/forums/topic/306106-stalling/#findComment-5065516
Share on other sites

clean your AFM, AAC valve with cabi cleaner. and try.

is your AUTOMATIC transmisson..? if so,

1 when it try to stall put it in to N

2 see how you feel. if u feel it want try to stall,

3 check your transmission fluid level.

drive or idel until engine get warm,

drive 1 2 3 and D and put in to R put in to N and leave it 1 min and check the level of the fluid. fluid level S/B in between L - H level. make sure your dipstick with no fluid bubles. if so do a transmission service.

I had the same prob with my car. hope ths will help u.

Hi there..

Hey my R32 GTS-t has started trying to stall when cruising at about 100ks.. It hasnt done it a lot, but it gives ya a bit of a fright when your car tries to die as your driving it on the highway lol.. anyway, it seems to try and die when its cruising, not under any great load or anything.. the cars an auto, so no change in bov.. thinking it could be a fuel filter cause im not sure when it was last done, esp because of the way it drops power very fast for about 2 seconds and then comes right.. the thing im wondering here is most fuel filters ive seen are made of like a clear semi transperant plastic.. but the on in this car is quite an old looking silver tin one.. is there any chance it could still eb the factory one or something?

cheers

Link to comment
https://www.sau.com.au/forums/topic/306106-stalling/#findComment-5065684
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Reading your posts Josh, sometimes I feel like I've gone in a time machine back to the 90's when everyone was doe-eyed and figuring things out for the first time.  I've lost track of how many single turbo GTR's I've seen on track that haven't burnt down lol. Everything has been figured out a long time ago. These things are at the point now where its essentially turn-key to go single turbo. 
    • Among other things yes. Making sure to either use an oil pressure regulator or the right restrictor size for your oil pump/range of oil viscosities you intend to run, making sure you plumb the lines correctly, turbo should be placed such that it siphons properly even when the water pump isn't turning so you don't boil coolant in the turbo after shutdown, oil return should be low resistance and also preferably picking the one that is most likely to return to the pickup as opposed to some other irrelevant part of the pan. It's far from impossible to figure this out but I have seen people really, really struggle and if that's the case it's easier to just take the path of least resistance. To me, bolt-on twin turbos are a fixed cost whereas single turbo is almost unbounded.
    • Latest round of updates on the car. I purchased and installed a SWS clutch slipper to help with 60ft times and got some second-hand good condition 275/40R17 Hoosier DR2 radials. Test and tune in November showed the tyres were an upgrade over my over 15 year old mickey Thompson's and I got a 1.8 second 60ft and pb et of 11.71 but even then, that run wasn't great due to rain and driver error (the event got called off 10 minutes later fast forward to the weekend just gone 25th of Jan and there was finally a break in the weather to let racing happen. The first run the track was slippery and only managed a 12.1@129 Second run the track was better and got a new pb et and mph: 11.54@131   Lith and I then worked out that I installed the previously mentioned clutch slipper incorrectly and its never been working, and I had just been dumping the clutch the entire time, we also noticed it was on street boost and not race boost. So I lined up for a third run with the car turned up in the first two gears, but the passengers side axle objected to clutch dumps and left the chat which stopped my weekend.   so there will be another attempt in the future once I replace the tyres as they rubbed and are stuffed now. but a low 11 should be on the cards.
    • Ceramic coating and heat shielding, you mean?
    • Turbos don't require pulling the motor apart so that's "easier". I would recommend the Nismo R3 turbos instead if you want to do stock twin turbo. It doesn't make as much power as the 2530s but it's only like ~50 whp off the mark and should have better response (ball bearing CHRA, slightly smaller turbo). A local that went with a Garrett G30 and 6boost manifold recently nearly burned his car to the ground after the hood insulator started melting and and burning so if you go single turbo I recommend doing a lot of research and validation work to make sure you don't do the same.
×
×
  • Create New...