Jump to content
SAU Community

Recommended Posts

Hi there..

Hey my R32 GTS-t has started trying to stall when cruising at about 100ks.. It hasnt done it a lot, but it gives ya a bit of a fright when your car tries to die as your driving it on the highway lol.. anyway, it seems to try and die when its cruising, not under any great load or anything.. the cars an auto, so no change in bov.. thinking it could be a fuel filter cause im not sure when it was last done, esp because of the way it drops power very fast for about 2 seconds and then comes right.. the thing im wondering here is most fuel filters ive seen are made of like a clear semi transperant plastic.. but the on in this car is quite an old looking silver tin one.. is there any chance it could still eb the factory one or something?

cheers

Link to comment
https://www.sau.com.au/forums/topic/306106-stalling/
Share on other sites

it could still be the factory one, but you will find that the replacement one will look pretty much identical. it would be worth replacing either way just to rule it out. sounds a bit weird that it is only doing it at light load. could also be an AFM issue, o2 sensor, AAC valve issue.

Link to comment
https://www.sau.com.au/forums/topic/306106-stalling/#findComment-5062163
Share on other sites

it could still be the factory one, but you will find that the replacement one will look pretty much identical. it would be worth replacing either way just to rule it out. sounds a bit weird that it is only doing it at light load. could also be an AFM issue, o2 sensor, AAC valve issue.

will look at changing the fuel filter and see what happens.. the only think ive changed recently is adding a full 3" turbo back exhaust.. but that was about 2000k's ago and its only started doing it now.. is there anyway way to check the o2, afm and aac valve?

Link to comment
https://www.sau.com.au/forums/topic/306106-stalling/#findComment-5062176
Share on other sites

will look at changing the fuel filter and see what happens.. the only think ive changed recently is adding a full 3" turbo back exhaust.. but that was about 2000k's ago and its only started doing it now.. is there anyway way to check the o2, afm and aac valve?

since the car was traveling at 80 -100km at the time of the drop, and so doing around 2.5 - 3k rpm, wouldnt that rule out the aac vavle? just trying to think of what might cause this so i have somehwere to start.. any input is welcome! cheers..

Link to comment
https://www.sau.com.au/forums/topic/306106-stalling/#findComment-5062207
Share on other sites

It won't be the AAC valve - that is only for idle control.

IT WILL NOT BE THE O2 SENSOR!!!!!!!!!!!!! A dead O2 sensor will not prevent the engine from running. It will simply cause an increase in fuel consumption (at worst).

It could be the fuel pump controller playing up. See if you can get a fuel pressure gauge set up and drive around a bit observing if fuel pressure has an effect.

The clear plastic fuel filters are for carburetted engines. They only need to withstand around 4psi pressure. All EFI engines run a metal canister fuel filter, so they can withstand the 3bar + fuel pressures.

Link to comment
https://www.sau.com.au/forums/topic/306106-stalling/#findComment-5063307
Share on other sites

It won't be the AAC valve - that is only for idle control.

IT WILL NOT BE THE O2 SENSOR!!!!!!!!!!!!! A dead O2 sensor will not prevent the engine from running. It will simply cause an increase in fuel consumption (at worst).

It could be the fuel pump controller playing up. See if you can get a fuel pressure gauge set up and drive around a bit observing if fuel pressure has an effect.

The clear plastic fuel filters are for carburetted engines. They only need to withstand around 4psi pressure. All EFI engines run a metal canister fuel filter, so they can withstand the 3bar + fuel pressures.

cheers for the help! gives me something solid to start on

Link to comment
https://www.sau.com.au/forums/topic/306106-stalling/#findComment-5065516
Share on other sites

clean your AFM, AAC valve with cabi cleaner. and try.

is your AUTOMATIC transmisson..? if so,

1 when it try to stall put it in to N

2 see how you feel. if u feel it want try to stall,

3 check your transmission fluid level.

drive or idel until engine get warm,

drive 1 2 3 and D and put in to R put in to N and leave it 1 min and check the level of the fluid. fluid level S/B in between L - H level. make sure your dipstick with no fluid bubles. if so do a transmission service.

I had the same prob with my car. hope ths will help u.

Hi there..

Hey my R32 GTS-t has started trying to stall when cruising at about 100ks.. It hasnt done it a lot, but it gives ya a bit of a fright when your car tries to die as your driving it on the highway lol.. anyway, it seems to try and die when its cruising, not under any great load or anything.. the cars an auto, so no change in bov.. thinking it could be a fuel filter cause im not sure when it was last done, esp because of the way it drops power very fast for about 2 seconds and then comes right.. the thing im wondering here is most fuel filters ive seen are made of like a clear semi transperant plastic.. but the on in this car is quite an old looking silver tin one.. is there any chance it could still eb the factory one or something?

cheers

Link to comment
https://www.sau.com.au/forums/topic/306106-stalling/#findComment-5065684
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • To be fair passengers who aren't silly and have been in proper fast cars have often been pretty impressed once you hit 4th gear   
    • I suppose that's true. Barring almost any situation, I'll never sell so what the market does is kind of irrelevant to me. It's possible I'd make most of my money back. That spreadsheet I mentioned? Maybe I could make back more than what the car's total costs thus far are, but the parts and all that is possibly a different story... Thanks for reading. It was certainly a good moment and just makes the ties to the car that much stronger. It's exciting that the option will be there to bring it over, however I have some plans with a shop that may end up keeping the car there longer, not sure. Coupled with the fact I want to move there and haven't solidified any path yet. So in a way, it feels like I'm in a limbo state that is uncertain; time will tell.
    • No worries, everything worked out in the end. I just wanted to make the point that it doesn't matter where it comes from (I.E Australia), it can be broken or improperly built. I would still purchase from these companies in the future. B2R - Not certain how that finished, this was on a car I wired a few things and street tuned. I know the owner ended up shipping the motor back to Australia for investigation. Hopefully some of it is covered under warranty.  Turbosmart - I always pressure test everything that goes on my car. It's a habit from my career in oil and gas. I run two 40mm's and both had major leaks from the actuator to exhaust portion through the shaft. I returned both, they shipped me back two and one was leaking and the other had a 38mm top (40mm gate with 38mm actuator cap, no idea how that happens). Eventually after a lot of back and forth I found myself with two non-leaking gates. I believe this happens a lot more then people would like to believe but you would never know if you don't pressure test them prior to installation. Crank Motorsport - Issued a full refund and let me keep the seat rails. I turned them into scrap metal for other projects. GKTech - Shipped me out a replacement and asked that I modify it as per my idea and that they would do the same for a future revision. ATP - Can just needed a large shim to bolt up properly.  Haltech - They started an actual proper Beta channel for firmware's a few months back and stopped using the general public for testing. I'm now much happier.  Speedtek - f**k Speedtek. I would love to watch them burn.     
    • I've got a Turbosmart wastegate, ATP catch can, many GK Tech parts and Haltech everything. Everything's been perfect, sorry to hear your experience wasn't the same
×
×
  • Create New...