Jump to content
SAU Community

Anyone With Electrical Know How?


HSV004
 Share

Recommended Posts

should have explained a little bit better.

basically i have no dash lights or rear parkers i think there called so night driving is not an option at the moment for me because from the rear it looks like i have no lights on and and i cant see how fast im going.

they work on and off and are connected to a different switch ( not the normal one the head lights are connected to ) not sure why this is.

im completely useless with car electrics, what are some things i can check before paying for an auto electrician to look at which at the moment is not an option

Link to comment
Share on other sites

Not sure if it's related - but on N14's - when rear parkers / interior dash lights go - they're on the same fuse under the dash. For me, they'd blow when they were getting a dodgy signal from the illumination wire in the radio (for some reason on N14's it's black - and the previous bozo owner had used it as the ground-wire).

I'd definitely be checking your fuses first and foremost.

Link to comment
Share on other sites

check that stupid bloody dimmer also, mine kept f'ing up and blowing globes.

take it out, and bypass it by soldering wires together, replace dimmer, win.

Wouldn't be surprised if the dimmer sits in the same illumination wire for radios/etc - which would make sense (that's the wire I've seen cause problems with the rear parkers/dash lights). So yeah - definitely worth checking the dimmer (if one is fitted).

Link to comment
Share on other sites

should have explained a little bit better.

basically i have no dash lights or rear parkers i think there called so night driving is not an option at the moment for me because from the rear it looks like i have no lights on and and i cant see how fast im going.

they work on and off and are connected to a different switch ( not the normal one the head lights are connected to ) not sure why this is.Generally 4 run'n from the fuz

im completely useless with car electrics, what are some things i can check before paying for an auto electrician to look at which at the moment is not an option

hey

let me make sure I've got this right..

your headlights and front parkers are on the standard switch, while the dash and rear are on an aftermarket switch , dash/rear only work sometimes.?

ASSuming this is right then

* get a test light ( even a globe in a socket with 30cm of wires)

to use conect one wire to the chasis and 'probe' with the other

* have a look at the aftermarket switch, it should have a power feed (Acc of IGN) and a feed that goes to the taillights/dash

* the second feed ( tail lights) will need to be hooked to the parkers feed on the standard switch

I'd also trace the power feed back and remove ( could go to fuse panel/durry lighter/anywhere really)

I doubt the dimmer would be the culprit as tail lights are generally not dimmed ( unless your doin the afore mentioned runner ) they can blow dash globes when faulty though

cheers

post or PM if ya need more help

EDIT:: just had a thread reRead are we talking an R33 or a SENATOR ???

Edited by BundyBear
Link to comment
Share on other sites

Could also be a problem with the contacts on the switch that the stalk connects to.

Had to change that assembly on a friends R31 once. He had no left headlight until I changed it.

Try what other suggestions have been put up here as well first. If you really get stuck & are in the western suburbs I'd be happy to offer help.

I'm an electronics tech & have done more than my fair share of wiring work on cars lately....

Link to comment
Share on other sites

Not all Jap cars have dash dimmers, when the cars are complied they are added if they don't have them and generally the dimmer switches used are cheap shitty. Just do away with the dimmer and the rear parkers would be on a different circuit, if they weren't when you dim the dash you would also be dimming the parkers.

With the parkers I'd look at the fuses first and then the the bulbs if the fuses are good

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • As far as I know, Infiniti stopped importing vehicles before 2020, even though they were still selling their stock for at least a year or 2 after that, they were older build years, therefore, you can import a 2020 400R, because you couldn't buy an AuDM 2020 built Q50 RS. As for insurance, you might need to go through one of the enthusiast insurance companies, they tend to insure a lot more grey import models than the mainstream insurers as Duncan mentioned.
    • loved seeing the zenvo on the a1 just after the hatfield tunnel i was the guy in the white van trying to egg you on it sounded awesome and those exhausts glowing red inside insane cheers for the thumbs up tim and tom.
    • So.... when I'm finally getting around to having my power steering leak sorted, now it looks like I've got the same issue most A/T Skylines are having. My A/T light will randomly come on and I'm stuck in 3rd gear until I turn the car off and on again. Only 3 weeks ago I did a complete transmission service: Oil flush + new gasket + new filter. This came out of nowhere!! It wasn't like the car was driven hard. I drove about 3 mins down the road to get fuel and boom!!!  Anyway, I have a few questions and hope you fine people can help me out here. All questions are in red. 1. The solenoids: I was looking at the parts catalogue in Amayama and I could only find the Solenoids as an assembly. https://www.amayama.com/en/part/nissan/319404ax05 I read in another thread that Solenoid A = 31940-4AX02 & Solenoid B = 31940-4AX05 but the Amayama product has only the code of B. Is this the right part? Can anyone who has done the Solenoid changes or seen them confirm if this is the complete set of A & B?   2. Gasket and Filter: I'm not going to try change the solenoids myself because it seems difficult to do in a home garage with just 2 jack stands. I plan to take it to a shop and get it changed. I was also going to buy the transmission sump gasket at the same time so I don't reuse the same gasket. Should I just use the existing gasket as it has only been on the car since OCT 19th? (~3 weeks) Should I be buying a brand-new gasket and a filter? Does this job involve taking the filter out?   Thanks in advance to everyone. It's hard to find a video of someone doing a solenoid change on a R34 so any help you can give answering my remaining questions would make me less stressed.
    • Yea - From what I have seen from the video, the car idles like any R34 lol 50PSI of fuel pressure is hardly super abnormal, the regulator is working because the pressure remains static when the throttle gets revved, i.e pressure remains the same when manifold vaccuum changes. Bigger pumps on stock rails always bumped the pressure in the rail without using an aftermarket regulator to change that. Do you know what your IAC is actually doing? Has there been any data showing the stepper motor % etc? There's no way your idle is actually moving around the way the cluster(s) are indicating. You would hear the difference with the engine RPM flying to 3k and 1k in mere seconds. I'd be checking the wiring to the tacho. What the tacho is telling you and what the engine/ecu is telling you are different things. I assume your ECU doesn't display the spike. So whatever is telling the tacho to be at X rpm is doing something weird. When the going gets insane, you're on the wrong path. You've ruled out plenty of things that are working correctly/aren't the issue. Your idle isn't doing what the tacho is indicating. You have two seperate issues, I don't think they are linked, and the idle seems reasonably okay unless it's stalling which.. well, it hasn't. Troubleshoot the stall if it occurs by figuring out what your IAC is doing vs what it is being told to do.
    • So awesome! I love the RB with the exhaust on display.
×
×
  • Create New...