Jump to content
SAU Community

Wrecking Eg Civic

ClutchBurndout-:(
 Share

Recommended Posts

ClutchBurndout-:( Grand Master

ClutchBurndout-:(

Posted
Posted

hey all, im wrecking a 92 honda eg civc vtec vti, all parts except...

engine rocker cover

body panels

right hand light and indicator

...are intact

car was rolled, so rocker cover is cracked, but engine seems fine, havnt started it yet incase theres oil in the spark plugs or watever, will start for sure with new rocker cover and the oil drained and changed, the car wasnt hit at the front, so the engine hasnt moved. the engine is a d15b vtec model

gearbox still works fine, its a reco box that is 2 months old, works perfectly, a good buy for someone looking for one

the interior is all good, its the rare tweed purple and grey interior

have the origional honda momo steering wheel and boss kit in good nick

apart from those main parts that i can think off, have everything else except the above mentioned items at the top except body panels

will accept most offers on parts as im trying to get rid of the car to buy a new one

spread the word to your honda friends! :P

pm me or sms me on 0432 677 253

Link to comment
https://www.sau.com.au/forums/topic/306214-wrecking-eg-civic/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • rahilp
      Requirements for Xenon Headlights? (Possible Solution)

      By rahilp · Posted

      Vertical orientation   6.2.6.1.1. The initial downward inclination of the cut off of the dipped-beam to be set in the unladen vehicle state with one person in the driver's seat shall be specified within an accuracy of 0.1 per cent by the manufacturer and indicated in a clearly legible and indelible manner on each vehicle close to either headlamp or the manufacturer's plate by the symbol shown in Annex 7.   The value of this indicated downward inclination shall be defined in accordance with paragraph 6.2.6.1.2.   6.2.6.1.2. Depending on the mounting height in metres (h) of the lower edge of the apparent surface in the direction of the reference axis of the dipped beam headlamp, measured on the unladen vehicles, the vertical inclination of the cut off of the dipped- beam shall, under all the static conditions of Annex 5, remain between the following limits and the initial aiming shall have the following values:   h < 0.8   Limits: between 0.5 per cent and 2.5 per cent   Initial aiming: between 1.0 per cent and 1.5 per cent   0.8 < h < 1.0   Limits: between 0.5 per cent and 2.5 per cent   Initial aiming: between 1.0 per cent and 1.5 per cent   Or, at the discretion of the manufacturer,   Limits: between 1.0 per cent and 3.0 per cent   Initial aiming: between 1.5 per cent and 2.0 per cent   The application for the vehicle type approval shall, in this case, contain information as to which of the two alternatives is to be used.   h > 1.0   Limits: between 1.0 per cent and 3.0 per cent   Initial aiming: between 1.5 per cent and 2.0 per cent   The above limits and the initial aiming values are summarized in the diagram below.   For category N3G (off-road) vehicles where the headlamps exceed a height of 1,200 mm, the limits for the vertical inclination of the cut-off shall be between: -1.5 per cent and -3.5 per cent.   The initial aim shall be set between: -2 per cent and -2.5 per cent.
    • GTSBoy
      Requirements for Xenon Headlights? (Possible Solution)

      By GTSBoy · Posted

      What do these say?
    • Komdotkom
      Torana Lx Gtr Hatch, Lots Of Pictures

      By Komdotkom · Posted

      Amazing
    • Steal01
      Torana Lx Gtr Hatch, Lots Of Pictures

      By Steal01 · Posted

      Looks good!
    • No Crust Racing
      Torana Lx Gtr Hatch, Lots Of Pictures

      By No Crust Racing · Posted

      Looks right at home
×
×
  • Create New...