Jump to content
SAU Community

Recommended Posts

Theyre the strongest out of all the models of skyline, but then they also modified the gearboxes when the s2 r33 gtr was released (double synchros, stronger 3rd gear)...

Standard GTR boxes are good for around the 500hp mark, after that you run the risk of stripping 3rd, which is where the ppg and os giken kits come into effect. For dans use tho, I think a standard 3rd gear out of any late GTR box will be enough - unless he wants to spend the $5k on the osgiken gearset..

-D

What? I thought 32 GTR boxes were renouned for being super-strong?
  • Replies 59
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

pretty sure Dan has a twin plate button, OS gearset wouldnt be too much harder, haha.

Im just trying to hold off on the smashed box jokes.

i have been wondering why you havnt posted one yet lol

The Nismo copper mix twin plate clutchs, one of which Dan is running make for an exremely streetable clutch,

If I had the coin - Thats the clutch I'd go for.

BIT-SUS, whas the PPG gearset like to drive with?

Theyre the strongest out of all the models of skyline, but then they also modified the gearboxes when the s2 r33 gtr was released (double synchros, stronger 3rd gear)...

Standard GTR boxes are good for around the 500hp mark, after that you run the risk of stripping 3rd, which is where the ppg and os giken kits come into effect. For dans use tho, I think a standard 3rd gear out of any late GTR box will be enough - unless he wants to spend the $5k on the osgiken gearset..

-D

pretty sure you have been ill advised

the OS giken gearset is discontinued also

really Chad

there is basically only a couple of gearboxes nissan built RB20, RB25push RB25Pull seen in late model 32 and all 33 GTR's some late model s2 33's might have the pull type gear box too

does nobody read these days

really Chad

there is basically only a couple of gearboxes nissan built RB20, RB25push RB25Pull seen in late model 32 and all 33 GTR's some late model s2 33's might have the pull type gear box too

does nobody read these days

Nope, you're thinking straight cut gears (PPG, Hollinger)... the os giken gearsets are the same synchromesh gears the stock box has, but made of higher quality metal (with slightly different ratios too)

I've read in other places from SAU that the GTR gearbox is the strongest of the lot steve, can you point us towards any documentation that says otherwise? The 25 has the same gear ratios as the gtr but not the same xfer case, aside from common gears I dont know if theres any other differences in the running gear, aside from the previously mentioned mods that were applied to s2 33 gtrs

-D

Don't the OS gearsets make your car a fvcken cop to drive?

25 boxes probably are just as tough as the gtr boxes if they do use the same gears, they'd also have the added bonus of fitting a rwd car better than the gtr xfer case... for street driving the boxes should hold up quite decently, but if ur gonna give the car a good working out with a beefy engine i suppose thats when you go to osgiken or dog boxes ;P I'd love the os giken kit tbh but theyre $5k per set...

-D

not sure Ben just something i heard along my skyline travels

there are however exceptions to every rule see mention of Andrew aka Blue32

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Sharing results from recent Liberty Walk R35 GTR, since they are still considered as somesort of a V36 Skyline. We do them turbos too. This are high flowed SS-1 models with ball bearing conversion done.  Car have managed to pull 485awkws @ 20Psi so far pushing limitations of factory built engine. The build list for R35 GTR enthusiasts as follow : HyperGear high flowed stock turbos in SS1 (G25-660 specs) Custom titanium intake pipes. Vspec performance titanium front pipes. Vspec performance 4" titanium exhaust. Upgrade fuel pumps. 1200cc injectors. Ignition coilpacks Hks intake plenum. Hks intercooler piping. Greddy intercooler. Greddy bovs. Top-secret coolant reservoir. Emtron ecu. Straight E85. Built gear box.  
    • Nah no bearings, just slip fit.  Would be a reasonably challenging but not impossible job to modify it to run bearings but I'm hoping that's not necessary as I may have well built one myself if I end up spending hours modifying it!
    • Brumbys with good shells are bloody expensive, I've looked at 2 "cheaper" cars, and walked away from both,  plus after some research spare parts are fairly sparce I'm starting to think that I missed the boat on finding a clean one that is straight (ish) and without alot rust I'm starting to think about a old Hilux as panels and other parts are much more available as they sold tens of thousands of them I use to be indecisive but now I'm not sure
    • A Brumby would probably fit a big metal toolbox in the back... this is how it begins  
    • Picked up a new OEM boot seal for the MX5 today as the old one got ripped a bit by me being a idiot by seeing if I could fit a large metal tool box in it, it didn't fit, and ripped the seal with the corner of the tool box I am still waiting on time to get the cams and new balancer installed, as well as the repairs to the boot Time will not be an issue soon though
×
×
  • Create New...