R34 Gtr Wilwood Brake Kit Fitment

[GTR Will]

Hi all.

need some help on brake kit fitment. The story is that I have a complete set of Wilwood kit W6A front, DynaPro back for 04 350z.

I want to fit them on my R34 GTR, but Wilwood in the US doesn't know enough about Skyline R34 GTR.

So to make this kit fit, mean either they find a GTR to try it or I send my car over, which is unlikly.

They've asked the follow questions, I wonder if any guru can help me out? I need info for both front and back. Many thanks.

Hub bore or hat center bore.

Bolt circle.

Stud diameter.

Caliper mount hole center to center.

Caliper mount hole diameter.

Caliper mount hole radius from center of hub.

Hub flange to caliper mount boss dimension (depth so to speak) Stock caliper piston(s) size.

MC bore.

Rear rotor dia.

Rear piston dia.

Hardline fluid line type. (M10 x 1.0 IF or Bubble for example) Required hose length speculating on caliper location.

[GTR Will]

bmup, anyone with anything?

[GTR Will]

I did some homework, but was not able to find all the info. And for those I did, I'm not sure if they are all correct.

Front Hub bore or hat center bore. ???

Rear Hub bore or hat center bore. ???

Bolt pattern - 114.5mm x 5

Stud diameter - 14mm

Front Calliper mount hole center to center. - Same as 350z (z33) CPV33 Brembo , actual measurement?

Rear Calliper mount hole center to center. - same as 300zx (z32), actual measurement?

Front Calliper mount hole diameter. - Same as 350z (z33) CPV33 Brembo , actual measurement?

Rear Calliper mount hole diameter. - same as 300zx (z32), actual measurement?

Front Caliper mount hole radius from center of hub. ???

Rear Caliper mount hole radius from center of hub. ???

Front Hub flange to caliper mount boss dimension (depth so to speak) Stock caliper piston(s) size. ???

Rear Hub flange to caliper mount boss dimension (depth so to speak) Stock caliper piston(s) size. ???

Front rotor dia. 324mmx30mm

Rear rotor dia. 322mmx22mm

Front piston dia.???

Rear piston dia. ???

Master Cylinder bore 26.9875mm (1, 1/16")

Hardline fluid line type. (M10 x 1.0 IF or Bubble for example) Required hose length speculating on caliper location. ???