Jump to content
SAU Community

Recommended Posts

Just did the maths and realised the copper spark plugs haven't been changed in my car for about 35,000km.

Perhaps this is why my r33 only produces 170rwkw despite having the following mods:

SAFC

3" turbo back

12psi

400hp fuel pump

front mount

I'm going to change the plugs on the weekend. Do you think I will notice any difference when I go for a drive?

I would say leave em in there til they fail

this is a good example of why those platinum or whatever ones are a waste of money!

I agree, power is about right... til you get a full ECU and boost it up to 14 or 15, you won't see much more...

Yes, definitely time for a change. I've been told the throttle reponse will pick up a bit.

I always thought 170rwkw was a bit low for these mods? You so often hear of people getting 180-190 with similar mods?

every dyno is different, every tuner is different. i made 170 @ 11psi with no safc and 192 @11psi after i got the safc tuned. u probably will pick up a few hp but just dont expect to. :P

I made 178kw with just an intercooler (boost was untouched but up to 10psi). Then made 192kw after 3 grand in parts (full exhaust, boost controller, PFC, pod etc). So 14kw cost me $3000. woot

Power depends on a LOT of things. As long as your happy with its delivery, I wouldn't bother.

I still say leave em, it's good to show how long the cheap ones can last. Maybe just give em a clean?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would paint match the whole thing to avoid unwanted attention  I had a similar bonnet, paint matched, on my old R33 GTST, but mine was a fibreglass jobbie made by Blitz in QLD, they work extremely well for radiator efficiency and under bonnet temps
    • Does anyone run this kit with factory plenum? Does the adapter and bosch tb fit under factory strut brace? I wanted to get this setup before going forward facing manifold. Thanks
    • small update time, after always wanting a "cool" looking bonnet for my car and always struggling to find one for the series 2 that i liked and wasn't an insane amount of money. Saw one i liked on RHDjapan from D-speed in Japan the price was very good for a carbon bonnet so good infact i was a little unsure how much i trusted it, decided to bite the bullet and with the help of jesse streeter in not long at all it was at my door. Once it was delivered i ran in from work and quickly unboxed it and to my surprise the quality was actually pretty good i quickly removed the old bonnet and placed on the new one to test it out and even the fitment wasnt too bad at all. Then decided to paint the little grille in the bonnet black to stop it sticking out so much.   I decided to not mess around with the hood latch and just install some aero catch hood pins, having never installed them before did some YouTube university classes and i was good to go. fair to say it is not a fun job at all from making brackets so the pins sit nicely and actually cutting through the bonnet but also being very scared of cutting the holes too big it took wayyyy longer than i would like to admit but finally got it there. Then it was time for a quick test drive to ensure the latches actually worked and thankfully the bonnet looked very stable. I still think paint matching the bonnet and leaving just the part that sticks up as carbon would help make it all look alot neater as im not sure how i feel about all that carbon on a very fridge white car but will leave it as is and see how i feel with time.  
    • I think it's bound to happen, you finally get it all perfect, and bam, something will happen. I took a while to get a Commodore rear quarter repaired where a P Plater clipped it. Two days after getting it back, Sarah wiped it out on a concrete pillar in an underground car park... This is why I take forever to repair them, it stretches how long until it gets bent again... 😛
    • Nah, not really responsible for that little fiasco, but I'm still pissed at myself for writing off my 86, or when I reversed my VX into a pole just before selling it, but, meh, 5hit happens to stuff, all it takes is a slight distraction, and life is full of distractions, and "dooh" moments   
×
×
  • Create New...