Jump to content
SAU Community

Recommended Posts

I had a look at the mufflers, the actual muffler shell is about 2-3mm bigger then the actual 4" in and out of it, so there is no real lip to catch so to speak. Suprising how compact these mufflers are.

The flex pipe in my setup is actually quite high up, from what I can see at the moment, the lowest part of my whole exhaust is at the base of the dump pipe where it comes out from the firewall. But, if I do make some kind of shield around the flex pipe, it may look like a cat! That could come in handy lol.

  • 3 months later...

Its on hold atm. Busy working on the race car and helping my old man work on his HR build. Add a gf into the mix and there just isnt enough hours to get much done lol.

I have supercharger pulleys machined up and ready to bolt on and pretty well everything done, just need the time to start fitting/hooking it all up!

  • 2 weeks later...
  • 4 weeks later...
  • 2 weeks later...

Damn that was an epic read. Got goosebumps from excitement. A really bloody nice job Mike. Nik here from email. Mate let me know if you ever want to give away the twin charge beast at all. Btw did customs charge a lot for those egt sensors a few years back? And you on another ECU? Finally, still E85?

Sorry mate questions galore, buy one get hundreds free.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • IMG_8641.mov     She doesn’t sound the best but starts with out using any gas now. I just ran some injector cleaner through her. started roughly the first time after adding it but gave it the beans slowly upto 4k, Must have cleaned a few cobwebs out. another step in the right direction for the sub
    • Sadly I can confirm if you are actually seeking to drift, you will quite easily spin up one wheel. Even if you're going in a straight line. I am not entirely sure of the metrics/terminology here but there's only a certain amount that the helical will actually spin both wheels. I've seen it on video with my own car where two lines of smoke switch over to just one after you really get in to it. Unlike with a clutch diff where you can keep your foot planted until the car regains grip, in my experience with the helical you want to be utilizing traction control allowing LIMITED slip or lifting (partially) when you start to spin up both tyres with a Nissan helical. Which makes them pretty sub optimal for drifting duty. That said... this is probably a helical on numbers alone. Just put the Kazz in
    • Let's just fix the problem by f**king the rest of the gearbox.
    • Unlikely, as per Greg's post. This is not helical diff behaviour unless one wheel is up off the ground. Shimming what? You don't "shim" a mechanical LSD. Probably not in the sense that you have heard of people "shimming" a diff. And the process that Nissan f**kwits call "shimming" a diff involves super-preloading a VLSD cartridge against the side of the diff to create a friction/wear point (in a place that it wasn't supposed to have one) to make the sloppy, useless, viscous diff into a hybrid viscous/mech abortion. In case it isn't clear, I consider the process to be stupid. Nike.
    • How much does the shifter move when the car is in gear with the engine off? If it is more than about 1cm you need to replace your shifter bush. Your shifts will just get crunchier, not faster, with a short shifter unless you also rebuild the whole box
×
×
  • Create New...