Jump to content
SAU Community

Boost Gauge Install

defari

By defari,
in Queensland

 Share

Recommended Posts

defari Grand Master

defari

Posted
Posted

so after my boost gauge has been sitting on my desk collecting dust for a few months i decided i'd have a shot..

after about 5 hours googling, trolling forums etc etc i still cant work it out (i have no electrical knowledge at all) and im not paying someone $100+ for something that probably takes 30 mins to do.. (yes ive rung sooo many auto electricians, cheapest was $100/hr)

questions

1. seeing as i have 3 greddy gauges, can i tap the wires from that (ground, power etc?) The Greddy gauges have the same wiring as the "autogauge" boost gauge.

2. If im able to tap those wires, all i then need to do is tpiece the vacuum line, mount the gauge, thats it right?

apologies for yet another "boost gauge" thread :happy: I know nothing about wiring (im at the point where i need pictures of what i need to tap / wire up)

Link to comment
https://www.sau.com.au/forums/topic/307242-boost-gauge-install/
Share on other sites
53XYN Veteran

53XYN

Posted
Posted

hey mate where are you located? if you have a greddy slim series you dont need to wire it in they use power off the exsisting gauges.. if your close to mt gravatt i'll give you a hand wiring it in if you want ... simple really hardest part is mounting it lol

defari Grand Master

defari

Posted
  • Author
Posted
hey mate where are you located? if you have a greddy slim series you dont need to wire it in they use power off the exsisting gauges.. if your close to mt gravatt i'll give you a hand wiring it in if you want ... simple really hardest part is mounting it lol

im over in paddington / ashgrove area. I think mine are the slim series like the one attached except i only have water temp, oil temp, oil pressure. Not sure what you mean, i dont need to wire my gauge in it uses power off the existing gauges? (how does it get power without wiring in?) or do u mean is the boost gauge a Greddy slim series gauge?

boostgauge.jpg

defari Grand Master

defari

Posted
  • Author
Posted (edited)

did a mock install before i tried it

photo below, the 2 top bits (the wiring and the filter thing, i have no idea where the filter goes, and i think the wiring is just extra incase you want to have a warning light)

P1010011-1.jpg

pic below is where one of my Greddy gauges is already wired up, black, red and white wire (this was my reason for the topic, can i tap those three wires?)

P1010012.jpg

pic below is apparently the vacuum line (which runs into the black unit which is the stock boost sensor for the stock boost gauge which is right behind the drivers side strut tower)

P1010013.jpg

anyone know if im on the right track?

Edited by defari
.:: GimpS-R34 ::. Grand Master

.:: GimpS-R34 ::.

Posted
Posted

first pic.. those ms paint bits you added to ask questions.. even on 400% zoom i couldn't even make out what you wrote..

why don't you get power off the ciggy lighter or something inside your dash that uses power when the car is started.. that way your not taking lines all the way to the engine..

if you got a factory vacuum line.. are you still using the factory boost gauge? if not then use that instead of the line with your gauge.. if you are then just cut into it and install that tee (one you circled

53XYN Veteran

53XYN

Posted
Posted

ah ok its a auto gauge.. well its better if you run the 12V acc power off your stereo , earth it either near the fuse box the bolts that hold the bonnet opener , one connects to your illumination (dims itself at nite) , the other is constant 12V this can be used from your stereo , you can earth it using the steel caddy around the headunit ...

53XYN Veteran

53XYN

Posted
Posted

by the way just to let you know you shouldnt tap into the Greedy sensor wires as that will stuff your gauge reading .. thats mainly for the sensor to convert it from analog (vaccum) to digital pressure for the gauge to read...

.:: GimpS-R34 ::. Grand Master

.:: GimpS-R34 ::.

Posted
Posted

why don't you mount the gauge.. hook up the +ve -ve etc wires that you know where they go.. then try bribe a workshop to hook up the last bit for cheap.. tht way you've done most of the work and they make a quick $$$ for little effort

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • BaronOBeefdip
      Baron's R34 GT-R build thread - car in Japan for 5 years -_-

      By BaronOBeefdip · Posted

      Hey, it's a GT-R, it's just as significant a moment as mine😁 It's not ideal when things are uncertain; I'm the type of person that always has a set plan for things in life so being unsure of this plan puts me in a weird place mentally.
    • Wazmond
      Stock rb25det neo questions

      By Wazmond · Posted

      Hows your intake piping? Are you still running stock? Having in the stock AFM position would mean, if the BOV was shut/venting out, it'd create the almost stalling kind of effect right // "the rich pulse behaviour" due to MAF thinking air is flowing ? But this would be better than having the bov in the stock position + MAF on/just before cross over piping right?
    • GTSBoy
      Stock rb25det neo questions

      By GTSBoy · Posted

      Essentially, yes. Although I wouldn't put the AFM on the crossover pipe. I'd want to put it into what amounts to the correct size tube, which is more easily done in the intercooler pipework. I bought a mount tube for card style AFM that replaces the stock AFM - although being a cheap AliExpress knockoff, it had no flange and I had to make and weld my own. But it is the same length and diameter as the stock RB AFM, goes on my airbox, etc etc. I don't have a sick enough rig to warrant anything different, and the swap will take 5 minutes (when I finally get around to it and the injectors & the dyno tune).
    • Wazmond
      Stock rb25det neo questions

      By Wazmond · Posted

      So to summarise, the best thing to do is to move recirc to between turbo and IC, and maf on the crossover pipe. Meaning I'd need a recirc flange, drill a hole in the piping on turbo outlet area. And drill hole on crossover to fit/weld maf sensor? Either that or put the MAF on the turbo inlet right?  Is an aftermarket recirc/blowoff valve recommended? Do currently have family in Japan so could probably bring something back with maybe a cheeky lil SuperAutobacs run?
    • tsuokun
      Lets play a game - What is causing my oil consumption?

      By tsuokun · Posted

      Yep, so far most have said that it looks like corrosion on the wall from piston not moving. Which then has probably damaged the oil rings and caused those vertical marks. The longest the engine was still after the rebuild, was the winter of 2018 - 2019, plus the boat trip to Japan. When I shipped the car, it had normal gas in the tank but before that winter pause, it had E85 in tank.  In any case, even if either one of those was the cause, it happened close to 6 years ago and the car has been driven something like 30 000kms after the fact. Again, apart from the plugs and the dip stick, there is nothing in the way the car runs that would indicate what has been going on in the engine. I am going to consult a shop and ask their opinion, what would be the best approach. I do have some access to a garage I could use to diagnose further myself, but time is very restrictive. Might end up buying another engine that could be used while this one is being remedied. Without pulling the head, it will be impossible to find out if it needs another bore, but here's to hoping a hone would suffice.  Goddamnit, I would really have preferred this not happening.  
×
×
  • Create New...