Jump to content
SAU Community

Compliancing Question.


Recommended Posts

Have a bit of a question re compliance, is it illegal for the company doing the compliance to comply a car which has had an integral part of the car removed? say the abs module? Is it also illegal for said company to then pass the car as roadworthy? This would of been done a few years ago, under sevs.

Link to comment
Share on other sites

The short answer is if it's not roadworthy and is passed as roadworthy, then yes that would be considered illegal, but also bear in mind that once the car has been driven away from the workshop, they can claim that you or someone else pulled it out. If the ABS light isn't on, there's a chance they may have simply overlooked it - I've seen a couple of cars come out of Japan with the ABS disconnected.

Link to comment
Share on other sites

yeah pretty tough to go back a 'few years ago' and prove what was/was not on the car. I'm not sure having ABS removed makes a car un-roadworthy. particularly if it was say an R32 skyline which has variants that come with ABS and other variants that have no ABS. It's a bit of a foggy question. In short, I'd say yes it's illegal. But if you have plans of suing them, or getting some kind of compensation from them then I'd say the chances are slim. They will almost certainly argue that the car was complied with ABS installed and fully functioning and that someone else has removed it in the intervening years.

Link to comment
Share on other sites

if you only just found out about it what makes you think the compliancer or importer knew about it? especially if its just the abs module, none of the big engine bay gear. Dont go pointing fingers just yet, roadworthy doesnt check for abs working, just a simple brake test, and theres no way that any agent in japan should be expected to make sure the abs in every car they purchase functions correctly, in fact that would be near impossible.

Link to comment
Share on other sites

I had known it had been removed, I just didn't know it could possibly cause me issues.

And Yeah well considering the plugs for the abs were tucked into the guard, and there was heat wrap around the lines I think not. Pretty bloody obvious.

That including the fact the roadworthy passed the car with bald front tires, and the fact I needed to get all 4 rotors replaced two days later as the pads were worn down to the metal/bonding material (like they did that in a 300km roadtrip home.....) makes me think they took their time doing the roadworthy.....

Amongst other things, I later found out the car had 60000kms taken off of it from when it was for sale in japan. Now who exactly wound it back I don't know, but I wasn't really suprised when I found out either.

I highly doubt anything will come of this, just utterly pissed off with the dealer I bought the car off.

Link to comment
Share on other sites

as far as the insurance implications go I would ring and anonymously ask your insurance company how they see it. maybe it can be noted on the policy that the car doesn't have ABS or some such. not having ABS wont necessarily instantly make it un-roadworthy. it does sound like the company that sold it to you may have glossed over a few things though :) bit of a shame.

Link to comment
Share on other sites

Doubtful the person on the phone would know how the law would treat this.

Now that you know about it, some policies state that if it is a known defect that contributes to the loss, you could be for some of that loss. Which company are you with?

Link to comment
Share on other sites

  • 2 weeks later...
I had known it had been removed, I just didn't know it could possibly cause me issues.

And Yeah well considering the plugs for the abs were tucked into the guard, and there was heat wrap around the lines I think not. Pretty bloody obvious.

That including the fact the roadworthy passed the car with bald front tires, and the fact I needed to get all 4 rotors replaced two days later as the pads were worn down to the metal/bonding material (like they did that in a 300km roadtrip home.....) makes me think they took their time doing the roadworthy.....

Amongst other things, I later found out the car had 60000kms taken off of it from when it was for sale in japan. Now who exactly wound it back I don't know, but I wasn't really suprised when I found out either.

I highly doubt anything will come of this, just utterly pissed off with the dealer I bought the car off.

Sounds like shenannigans going on between the dealership & the roadworthy.

Sounds like you're not the 1st

Sounds like they'll do it to others

Sounds like...

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Once the airbag is off, to remove the steering wheel.... Undo the 2 plugs into the clock spring, and the horn connector from it's clip. Hit the 19mm nut with a rattle gun (preferably) or if you don't' have one, you probably want an assistant to hold the wheel in place while you use a breaker bar to undo the nut Then, screw the nut back on 3 turns, and pull the wheel sharply towards you. If that doesn't work hit it medium force with a rubber mallet on either side, or possible behind if you can get there. If that all fails (it shouldn't!) you might need a steering wheel puller
    • So, to next task....the carbon fibre steering wheel was either an expensive factory option or a chinesium special. Either way, I don't like either the flat bottom or thick ring style, so it had to go So...to remove the steering wheel.... First, disconnect battery negative and stop on the brake pedal for a few seconds. Then, remove the small circular covers on each side of the wheel's rear surround to uncover the airbag clips. You need to push something like a flat bladed screw driver through, you need to push the steel clip inwards and pull the side of the airbag forward. Once you've done the easy side, same on the centre console side. You can see the tab you are shooting for circled in red Then, disconnect the horn spade connector and for the yellow airbag plug you need to get something small under the black locking tab to pop it out, then the connector releases......airbag is off  
    • @99RS4just wondering if you ever took photos of the footwell lighting / how you bypassed the controller, im keen to haver footwell lighting come on when I open the doors too   
    • Ultimately, if the tip is not far into the runner and the o-ring seals, then you are in business. Have you applied pressure to it as is? It is not really a problem for the injector to twist once it is bolted down, the oring seals it and you don't want it jambed into the oring too hard The plenum is intended to take multiple size lower injectors with different adapters, but the way you have it is fine if they seal.
    • Are these the Dmax ones you are in reference too? https://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35#description Not a bad idea to get the uni flange ones. I have sent just jap an email too. Will see what they say lmao. Only thing is the Dmax ones are on a big back order. Low key anything will be better then my OEM ones I got as they are sounding like popcorn when I go under load lmao 😂☠️🪦.
×
×
  • Create New...