Jump to content
SAU Community

Recommended Posts

Hi,

We are doing the R33 RB26DETT motor swap into a US Spec 1998 240SX (S14), and we are going with the Apexi Power FC. I know that the D-Jetro uses the MAP sensors, which would be great for the ultimate tuning control, but does anyone have experience with the tuning?

I have talked with several shops in the USA who won't tune it unless we convert to a single throttle body setup. Could anybody share their knowledge or recommend a better setup?

Thanks!

Chris

Link to comment
https://www.sau.com.au/forums/topic/30785-power-fc-d-jetro-how-hard-to-tune/
Share on other sites

I would use a standard or Pro PFC with upgraded AFM's with the 6 throttle setup intact, as removing these as you probably already know sacrifice fuel economy, but more importantly off-boost drivability and throttle response.

you have already decided to take the first step in degrading your throttle response and drivabilty by using the D-Jetro, so you may as well convert to a single throttle body as well.

The 6 throttle setup is known to make tuning tricky, as the standard throttle body causes some kind of inlet pulsation which the MAP sensor picks up as rapidly fluctuating air flow - This is why most tuners have trouble tuning this setup, however it is very possible, to tune using this setup as it has been done many times before.

At low RPM/airflow levels/load, tune using the TPS versus RPM with the MAP disabled. On boost, at higher RPM, the pulsations will start to diminish and this is where you use the MAP sensor for tuning inputs.

As i have no experience tuning the D-Jetro, i do not know if the D-Jetro is able to do this, but this is apparently the solution.

Hope everything works out :(

edit: this information is mostly second hand and could be incorrect. this is an internet forum, so i hope i dont need to tell you to check the facts first :)

  junkie13 said:
sorry to be off topic but can i ask why dosnt usa have any silvia s15 cant they import them or anything

None of the Silvia's can be imported as the SR20DET motor does not meet emission standards here in the USA. Motorex has been able to import the Skyline after years of tests, etc. Nobody unfortunately is going to go to the expense of crash testing a $15000 car...I wish they would, it would be my dream car....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...