Ssr Professor Sp1, Centre Is Too Big

[joeyjoejoejuniorshabadoo]

as above, professors do not fit onto the gtst hubs as they are too big, no most people just run them on the studs, and have no drama's, BUT is there a "converter" available? I had some custom made on my last set, but i had to destroy them to get them off to replace the rotors

[Scooby]

as above, professors do not fit onto the gtst hubs as they are too big, no most people just run them on the studs, and have no drama's, BUT is there a "converter" available? I had some custom made on my last set, but i had to destroy them to get them off to replace the rotors

don't run them on the studs. good luck to those that do but remember the weight is taken on the hub not the studs, hence why dodgy spacers cause wheels to fly off now and then.

try Donnellan's or another big tyre place, i had some made up at a tyre place here in Canberra.

[stenve]

do you mean like hubcentric rings joeyjoejoe..?

Ive got them on my car to fit the GT-C's properly.

one of them is cracked though. when i looked for replacements i found some options on ebay (all international sellers though)

Still havent bought any... so let me know how you go.

[Basti]

jdm concept sell work ones i believe

[stenve]

http://www.musecret.com.au/category19_2.htm

Also found some there. I hope that isnt $100 per ring though :S

[joeyjoejoejuniorshabadoo]

awesome! gonna git some!

now to find out the sp1 dimentions...

anyone know the OD for the r33 hubs?

[mr_scary]

I got mine from bob jane for $10 each... maybe try there

[joeyjoejoejuniorshabadoo]

that sounds like an extremely good idea, and i will try out said idea this week

[batakr33]

Arent they just hub rings ? last time I bought a set from Jax Tyres for $20

[joeyjoejoejuniorshabadoo]

yeah, that's all i'm after....

i just got quoted $20 from bj's

just have to go in when there's not 11ty people to measure them

[joeyjoejoejuniorshabadoo]

just went to bj's.... got some ordered

[batakr33]

Do you remember the size by any chance ?

[Basti]

yeah nigz, whats the outside diameter of r33 hubs? i'll have to measure the inside diameter of my meisters

[joeyjoejoejuniorshabadoo]

66.somethingorother

sorry

[batakr33]

http://cgi.ebay.com.au/Hub-Centric-Rings-O...=item27af9a9338

I tried measuring it and i'm going to take the gamble and buy it. If they dont fit i'll report back