Rda Vs Dba Slotted Rotors

[mr_scary]

Dumb question time. Will DBA 4000 R33 GTS-T rotors fit onto a R34 GT-T? Seeing as there's no listings for R34's apart from GTR & GT.

R34 GT-T fronts are 310mm, 33gtst are 296mm - so no they won't fit. Rears are the same.

@crazy.mofo: I've used RDA slotted rotors for ~10,000km with 3 track days and have held up fine so far. Personally, I chose the RDA's as, through the group buy, they're so much cheaper than anything else. Even if they don't last as long as the more expensive stuff, you can buy 2 (or even 3) sets of RDA's for the price of the others.

[BASHO]

OK anyone know what other manufacturer has the same stud patern and offset--5x113.4 and +40 offset 310mm fronts & IFIIK rears.

[crazy.mofo]

cheers for the infos bought a set of rda's from the group buy on here. should suit my fancy for a while at least

[nato_wp]

OK anyone know what other manufacturer has the same stud patern and offset--5x113.4 and +40 offset 310mm fronts & IFIIK rears.

I had a look at a couple of international brake manufacturers, and so far, based on my internet research alone... R34 GTT's are the only things in the world with 310mm x (22mm - I think, don't quote that measurement) rotors. let alone stud patterns, offsets...

I looked into it, as I was considering changing hubs (thus stud patterns didn't matter), but want to keep my calipers... but that story is not relevant.

[dkbcleaner]

When I upgraged to rda I couldn't find any 4000 series rotors that suit a gtt. But the rda are a good buy and are a big difference in stopping power compared to stock.

[neo32]

i have r32 wit the gtt front brakles on

i went the dba 4000 series

they seem real good

packaged with ebc red stuff pads

[JustinP]

I had a look at a couple of international brake manufacturers, and so far, based on my internet research alone... R34 GTT's are the only things in the world with 310mm x (22mm - I think, don't quote that measurement) rotors. let alone stud patterns, offsets...

I looked into it, as I was considering changing hubs (thus stud patterns didn't matter), but want to keep my calipers... but that story is not relevant.

I have DBA 4000XS rotor's on my R34 GT-t.

[Gunnar_11]

Some of us had problems with DBA4000s cracking when used at the track. Do a search if you want the details.

This is a widely reported problem on the 4000's when used for track work