Jump to content
SAU Community

Rda Vs Dba Slotted Rotors

crazy.mofo
 Share

Recommended Posts

mr_scary Enthusiast

mr_scary

Posted
Posted
Dumb question time. Will DBA 4000 R33 GTS-T rotors fit onto a R34 GT-T? Seeing as there's no listings for R34's apart from GTR & GT.
R34 GT-T fronts are 310mm, 33gtst are 296mm - so no they won't fit. Rears are the same.

@crazy.mofo: I've used RDA slotted rotors for ~10,000km with 3 track days and have held up fine so far. Personally, I chose the RDA's as, through the group buy, they're so much cheaper than anything else. Even if they don't last as long as the more expensive stuff, you can buy 2 (or even 3) sets of RDA's for the price of the others.

nato_wp Enthusiast

nato_wp

Posted
Posted
OK anyone know what other manufacturer has the same stud patern and offset--5x113.4 and +40 offset 310mm fronts & IFIIK rears.

I had a look at a couple of international brake manufacturers, and so far, based on my internet research alone... R34 GTT's are the only things in the world with 310mm x (22mm - I think, don't quote that measurement) rotors. let alone stud patterns, offsets...

I looked into it, as I was considering changing hubs (thus stud patterns didn't matter), but want to keep my calipers... but that story is not relevant.

JustinP Mentor

JustinP

Posted
Posted
I had a look at a couple of international brake manufacturers, and so far, based on my internet research alone... R34 GTT's are the only things in the world with 310mm x (22mm - I think, don't quote that measurement) rotors. let alone stud patterns, offsets...

I looked into it, as I was considering changing hubs (thus stud patterns didn't matter), but want to keep my calipers... but that story is not relevant.

I have DBA 4000XS rotor's on my R34 GT-t.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Shoota_77
      Baron's R34 GT-R build thread - car in Japan for 5 years -_-

      By Shoota_77 · Posted

      You have (externally anyway) a lot of patience!  At the very least your patience has rewarded you financially even if you decided you were over it!! I only just read your first experience of seeing the car, that would have been amazing!  Well documented too! It must be exciting knowing there's only 10 months left until you can get it on a boat and on it's way!!!???
    • BaronOBeefdip
      Baron's R34 GT-R build thread - car in Japan for 5 years -_-

      By BaronOBeefdip · Posted

      Yeah, that's when. I guess you could say I'm as patient as I am foolish(or just a masochist?🤔). I've strongly considered throwing in the towel and calling it all quits many times, and have almost done so. It's a first-world problem for sure, but I've had a pretty rough go of it, as well as other factors; hoping something good comes of all this; it has to. It definitely is half the price of the ATS and performs great, but I'd like to try something different for once. I've sampled the ATS in a friend's 32 and it's solid👍
    • joshuaho96
      Baron's R34 GT-R build thread - car in Japan for 5 years -_-

      By joshuaho96 · Posted

      I know mentally you're set on the ATS clutch but honestly I'm a big fan of the Nismo Super Coppermix Twin. It's much cheaper and in some ways I think it's a better design for a street/circuit car.
    • soviet_merlin
      Baron's R34 GT-R build thread - car in Japan for 5 years -_-

      By soviet_merlin · Posted

      Just checked in first post and you should be able to bring it home November this year, right? I'm amazed you made it through four years of this. As hard as it feels now the rest will go by in a breeze in hindsight, I'm sure.
    • BaronOBeefdip
      Baron's R34 GT-R build thread - car in Japan for 5 years -_-

      By BaronOBeefdip · Posted

      Realized I haven't been back here in a while. Still here, still alive, still waiting for the car.  I went back again the only time last year from Oct-Nov for R's Meeting and drove it around some more, including a few laps on Fuji Speedway(in the wet, sadly). The car still feels good, but have a couple small things to address. I've been getting more parts but have slowed down still, and most of the bigger purchases are now out of the way. I find myself getting impatient more and more when it comes to getting started on this project; it's quite hard for me not being able to really dive in and start making this car my own because it's halfway across the world. At times it doesn't even really feel like I own one of these. Haven't really been motivated or had the desire to document the last trip on here or social media for, well, reasons... but here's some pics...it's also still alive and well as you can see: I've narrowed down to the last large part purchases(anything over $2k) before the engine build to be: 1) Ohlins Road & Tracks 2) ATS Twin Carbon clutch 3) Endless BBK with some custom options and 4) Kansai Service carbon driveshaft I don't think the budget exists for all of these this year, but I'll try for one or two items I think. Though, every time I look at my spreadsheet I sigh, shake my head, and get depressed just that little bit more.  'til later.
×
×
  • Create New...