Jump to content
SAU Community

Recommended Posts

At te moment, the motor will go in stock, with a set of extractors and 3" exhaust, and fully tuned. Fully tuned around 220rwkw. But a VERY big useable power band.

Once I put the cam in, 280/290 rwkw with still a very useable power band (2500 rpm to 7000rpm and instant throttle, and keeping the super short diff ratio)

Pretty much well details on the swap, basically standard 5.7L 6speed manual running an adaptronic e1280s, camber arms, new coil overs, new seats, under the dash stripped out (no air con or stereo shit). Still debating on whether I strip the sound deadenin or not. Being setup for sprints, hill climbs and the rare cruise.

there is a kit that swaps the starter motor to the other side if that helps....

Thats what the old commy boys do anyway..

http://www.rodshop.com.au/holden/vl.htm

http://www.rodshop.com.au/trans_conversions/ap/ap130.htm

for 995$ it includes a new starter and could save alot of headaches..

there were alot of similarities between VLs and skylines, I remember seeing a VL In a magazine that had a complete GTR drivetrain and the guy said it almost fit straight in so Id be looking at what else may fit from these kits, the extractors maybe close to a fit even..

Cheers Arthur, that's very interesting there indeed. Thanks for the link.

I'll speak further with Brad about it.

Edit: Although a new starter is only around $330... So it is a fair expense more for a few bolts and the spacer plate...

I've just fitted one of those "kits" into a vr commodore with a gen3 manual conversion. It is a pain in the frickin backside, the bolts supplied werent the right length or even thread type for the plate, it was missing a spacer for the bolts to. Bolts that were supplied were m6 thread, thread in plate is 1/4unc. In the instructions it also doesnt tell you to machine out the bellhousing so that the starter motor gear can actually come out of the housing.

Just a heads up.

I've just fitted one of those "kits" into a vr commodore with a gen3 manual conversion. It is a pain in the frickin backside, the bolts supplied werent the right length or even thread type for the plate, it was missing a spacer for the bolts to. Bolts that were supplied were m6 thread, thread in plate is 1/4unc. In the instructions it also doesnt tell you to machine out the bellhousing so that the starter motor gear can actually come out of the housing.

Just a heads up.

That sounds perfectly normal for what comes out of CRS actually

I'm not bad mouthing it fully it is a well thought up bit of kit, BUT for the price you pay for it they could have made it a complete bolt on affair.

Since Rod Hadfield sold CRS the quality/care factor of their bits has gone down hill

I did call them in regards to custom/one off bits and pieces too, and they no longer do one offs. I was informed all that they will do is churn out "kits".

I've spoken with brad in regards to the steering rack changes, and I feel much safer letting him f**k with the rack then buy that kit and not know what will happen.

We've discussed things and the geometry will be "normal", the rack is being moved towards the drivers side, and then extended on the passenger side so that we don't have different length arms.

Yeah sounds like you have a cluey man on the job anyway, I wish you the best of luck with it and I will be watching with anticipation for sure

If you dont mind me asking what sort of budget are you hoping to achieve the conversion for, not including the engine cost..Or would you rather not think about it :D

Love my V8s and have thought about it plenty of times..

Since Rod Hadfield sold CRS the quality/care factor of their bits has gone down hill

This is news to me, when did that happen?

Yeah sounds like you have a cluey man on the job anyway, I wish you the best of luck with it and I will be watching with anticipation for sure

If you dont mind me asking what sort of budget are you hoping to achieve the conversion for, not including the engine cost..Or would you rather not think about it :D

Less than what he has spent on breaking RB30's over the years :nyaanyaa:

Yeah sounds like you have a cluey man on the job anyway, I wish you the best of luck with it and I will be watching with anticipation for sure

If you dont mind me asking what sort of budget are you hoping to achieve the conversion for, not including the engine cost..Or would you rather not think about it :D

Love my V8s and have thought about it plenty of times..

Well everything included, engine, box, clutch, ecu, wiring, etc etc (There's lots of little shit!) I'll be happy if I can get out of this for under 12K. After doing so many motors, I know that this will go over budget... But I do have a heap of spare parts (RB25 Gearbox, head etc) that are all up for sale to help compensate)

And I did pick up my motor and gearbox for an absolute steal (And clutch!)...

Also, that's not including everything I'm doing suspension wise, as well as inside the cabin. (New Seats, redoing bits behind the dash, gauges etc)

yeah i was thinking you be lucky to get it done under 10k so you have confirmed that..

But honestly if I ever was to spend money on my car I would do this before an rb30' . no doubt a bit of hassle for inital setup but so much potential..

does that money include any chassis bracing or engineering reports or whatever for rego or is that just to get it fitted and running for the track..Id love to do it just to see the 'WTF' look on a coppers face when he popped the bonnet :laugh:

That's in fitted and running.

No engineers report. Nothing :(

This thing sparcely sees the road, it only ever used it's rego to go to events really ( half the events it went to itcame back on a trailer)

To be honest, by the time I got this car running with the rb30 the first time, it'll cost me the same as the v8. Considering I was about to build a forged 30, a few more grand for this is way better!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Also had a look at the Nissan JP website looks like the 400r has a slightly shorter ratio than than the regular V37 3.133 VS 2.937 which from a guy who has driven both 3.69 vs 4.11 ratios in the S15 is bugger all. Seems that the AUTO Z runs the same ratio as the 400R but can't find any info as to if its an open or LSD? More often than not the auto LSD is open
    • Do not replace the power steering lines with this stuff. If it's anything like the Chase Bays stuff it will leak and be worse than stock. The reason why the reservoir is on the LH/passenger side of the car is because that's just where the reservoir was most convenient to fit. Don't overthink this stuff. The intake/cold side of the engine is pretty busy on these cars. And again, the hardpipe is designed to be a janky power steering cooler. In theory you can replace it with a real power steering cooler but that's really only for track use where boiling the fluid is a distinct possibility. Start with the low pressure lines feeding the pump from the reservoir. Make sure there isn't a bunch of junk in the reservoir filter. Be careful to not get ATF all over the engine bay. I hate dealing with ATF spills, you can clean it up and the slightest crevice will still release more oil that can still drip over time. You also want to inspect for leaks before you make a mess and can't tell what happened. Most likely you have a leak somewhere that is allowing fluid out and air in. Failing that it's allowing air in but not fluid out. Only place I can really see that happening is on the low pressure side because the pump will pull a slight vacuum to draw fluid in. Everything after the pump is high pressure or lower pressure, approaching atmospheric by the time it returns to the reservoir.
    • I did a skidpan night at SMSP this week, it was much cheaper than $350. But yeah, you need to slap an LSD in that thing.  I put an OS Giken in the 370Z and it's f**king MARVELOUS even compared to Nissan's viscous LSD. So you're saying it's free now that it's a housing estate? 😂
    • Nah, the car seems to run exactly as it did prior, in saying this it does "seem" to be better down low, like more eager to rev, but that may be 100% placebo effect from intake noise But, I'm not worried about it at all, in the end it is a fairly low compression NA engine that has a well shrouded intake,  if it is getting hotter IAT I cannot notice anything negative performance wise from the seat of my pants thrashing it about on the street or sitting in traffic, so meh, car now now makes induction noise so I'm happy
    • Do you have an IAT sensor? It's worth checking it to see. You may be suprised how little gap you actually need to flood your engine with hot air. (I tape up my airbox for a reason) :p
×
×
  • Create New...