Jump to content
SAU Community

Recommended Posts

White 35 and I are awaiting delivery of our Volk RE30 rims and are interested to know if anyone has had experience with 19 inch slicks or semis. They are the rage in the US, and I know a number of you have opted for 18s here. We know there are Hoosiers and Toyos, is anyone aware of any other options?

Link to comment
https://www.sau.com.au/forums/topic/308183-19-inch-slicks-or-semi-slicks/
Share on other sites

Michelin PSC isnt going to compete against a good R compound let alone a real slick IMO.

And i dont fancy you getting a proper slick in 19" either

I think you are stick with the 888's (good luck) or Hoosier's (better)

What width of wheels are you running front and rear 09GTR ?

Different sizes of the Michelin Pilot Sport Cup tyres have different load indexes.

There is a chart here with the specs and load indexes for the Michelin Pilot Sport Cup tyres...

http://www.tunersgroup.com/Online_Store/mich_sport_cup.html

- The Tuners Group

Edited by TheTunersGroup

I didnt know that, good pickup/find.

If you must run 19's i would give them a good look. Otherwise the USA guys seem to love the hoosiers.

Edited by LSX-438
Thanks guys, some excellent pointers here, I'll let you know what I find.

Duncan, you are clearly a fan of the 18's, and they obviously work well for you - whats the key reason you went with 18s? Tyre availability?

Yes the 18's are about availability (and cost) really.

Also the 19" r-spec options (i think only 888's?) just don't compete with RE55's. So in my case 18" was the only choice (they dont make re55's biger than 18"). However on slicks the 19" Hoosier (or perhaps the Michelin 19") would be worth a look. I do think they will be a lot more expensive though, so i am not sure why anyone should bother.

If you want a tyre that you can drive to the track and back, and run pretty close to slick shod times, get some 18" TE37's (or Enkei GTC01's) with 295 RE55's SR2's all round. No other road legal tyre is going to come close i reckon (would love to try the advan 50's but they dont make them big enough). If you dont care about being road legal and/or you're happy to swap the tyres at the track, perhaps the 19" slicks are good. Would love to get some feedback from the GT series R35 running them.

I need 19s as I will be doing targa with mine. targa allows no more than 1 inch + or-.

What size and type of tyre are you guys thinking. i want all tyres the same size to make it easier for spares.

Has anyone looked at the Pirelli P Zero Corsa looks like a bargain semi slick.

I need 19s as I will be doing targa with mine. targa allows no more than 1 inch + or-.

What size and type of tyre are you guys thinking. i want all tyres the same size to make it easier for spares.

Has anyone looked at the Pirelli P Zero Corsa looks like a bargain semi slick.

Why do you need 19's for Targa?

I had the Pirelli P Zero Corsa on my porsche 911s and they were awesome. Running 19's on the GTR you will save probably at least 5kg per cnr and they should be pretty good on the road. Guessing you might want to run 315/30/19s on 11inch rims rear and 295/30/19s on 10 inch at the front? thats just a guess?

Righto because 09GTR and I want complete track spec tyre no compromise we are going to give the 19's a shot - we will run Hoosiers on track (approx 7kg lighter per wheel i think) and stick with standard rims & bridgestone / dunlops for the road.

There is word that Bridgestone may be replacing the re55s with the re11s and it will be avaliable in a 19 sometime in the future. Fingers crossed.

Fall back position will be to run R888's if we cant use hoosiers at some events.

Surely its only a matter of time before these tyre companies make more options avaliable in 19's.

We will report back once we have done some track time on the Hoosiers.

This might sound like a silly question but do the Volk TE37's come in black as well as gold in an 18 that will fit thr R35's ?

I am very attached to the black white wheel/car colours of my 35

there is definitely an 18" TE37 that fits the R35. a few people have run them. Don't expect anywhere in Australia to have these in stock though, especially in the staggered offset required for r35 (let me know if you do find a place!). Caliper clearance will be very small (2mm or 3mm if that)

Caliper clearance will be very small (2mm or 3mm if that)

Page 18 of Brembo's Gran Turismo High performance brake systems catalog which you can find here ... http://www.brembo.com/NR/rdonlyres/12D6A5F...talog_R2DEF.pdf ... reads ...

"Brembo recommends a minimum clearance of 3mm between the caliper and the wheel spoke or rim."

Caliper to wheel clearance is part of the reason why a number of R35's run 19 inch track wheels instead of 18 inch track wheels.

There is a new article on our website here which explores the 19 inch track wheels options for R35's, and discusses caliper clearance, tyre choice, lateral stiffness of wheels, cooling considerations etc in detail ...

http://www.tunersgroup.com/r35_wheels.html

- The Tuners Group

Edited by TheTunersGroup
This might sound like a silly question but do the Volk TE37's come in black as well as gold

Hi Jeremy,

Standard factory colours for the TE37's are are white or bronze. They can also be ordered in optional colours at an additional cost.

There are 3 optional black finishes for the TE37s - black, matt black and diamond black.

This a photo of a set of Volk RE30's in Diamond Black ...

large1362.jpeg

- The Tuners Group

Edited by TheTunersGroup

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Like a Stagea, but not as cool! Hope you have enough garage space for this, or is something going to leave to make way for it?
    • The new project has arrived. I have wanted one of these for such a long time, well before that meathead Clarkson drove one in Africa. I really wanted an E34 but I have some medical issues that mean I *really* can't bump my head and the lack of airbags in the E34 made it just too big of a risk.  I don't know why I've always liked these older touring BMW's to be honest, but man I love this car. She's been pretty well maintained for her 243k's with what appears to be only a single oil leak at the oil filter housing gasket. It has a bunch of updates including later model bumper and headlights, 7 series billion-way adjustable seats and it came with a few spares and another set of wheels with legal tyres. I got a unregistered car permit from the RTA and drove it back from Canberra on Saturday.                   First cab off the rank is cleaning it up for blue slip. I dont know how picky they'll be but I figured I'd clean the headlights, fix the oil filter housing gasket, replace the speed sensors (throwing errors) and swap the OE wheels (the M Sport wheels have a big chunk out of one of the tyres.) I also need to replace all 6 gas struts - 2 for bonnet, 2 for hatch and 2 for hatch glass. The car tries to eat me whenever i open any of these. My plan for this car; Ultimately, this is a budget car. I can't afford to throw lots at it and its because I have another car that I got this, if something breaks its no big deal. I will just maintain and repair it really. But eventually I want to do a manual conversion. It actually looks pretty straight forward for E39's and the trickiest part will be sourcing the parts.  I do need to replace some suspension arms or bushes because wow, she's a floaty old girl. She's also fantastically slow. Like really, really slow. When pulling back out on to the freeway on Sat after a quick pull over I needed to wait until no cars were visible before going.  Oh, and the guy I bought it from had a gorgeous R31 GTS-X in the garage. 
    • Do you have a picture? I assume it is a breather for gearbox oil as it expands, it should have a vacuum line run nice and high in the engine bay (R32 GTR has it on a top bellhousing bolt)
    • Hi all, I am putting an r33 gtst gearbox into a VL and have noticed what looks like a vacuum barb on the box (on top in the middle). Suspecting that it's a vacuum line but I'd like to double check, if someone could confirm the function of that would be great. Cheers in advance.
    • I’d love to find some where that can recover the dashes to look brand new and original. Mine has a very slight bubble, nothing compared to some I’ve seen though 
×
×
  • Create New...