Installing R34 Fmic...please Help!

[James34]

So I've spent the last day and a half trying to install an FMIC into my GTt r34 Skyline.

I've ran into a few problems, and ended up just putting the stocky back in so I can drive it.

Mounted the cooler no problem, had to get a new smaller thermal fan and move the horn, but all good.

Taking out the old side-mount was a bit of a hassle, but got it, and the piping on that side fits perfectly.

My problem is with the piping on the drivers side.

First, we managed to find a gap small enough to JUST fit the piping through. But coming up into the engine bay, and running across above the radiator fan, it sticks up too much and the bonnet cant close (aswell as having to remove the engine cover).

Can anyone who has installed an r34 fmic give me any ideas? I'm getting quite frustrated!

Cheers.

PS Will post pics if needed...

[99 GTT]

What brand of FMIC is it?

[James34]

What brand of FMIC is it?

It's just a crappy brand one (chinese I think :-S)...Monsta Performance.

Piping kit is nothing like what it needs to be, but I have some extra piping to work with.

Just need to know where to put it and how it should go in

[99 GTT]

Most of the FMIC apart from the turnflow units require you to cut a neat hole under the battery box in the same place as the GTR has one.

If it is the following item then from the pics it will need a hole cut.

Link

[James34]

Most of the FMIC apart from the turnflow units require you to cut a neat hole under the battery box in the same place as the GTR has one.

If it is the following item then from the pics it will need a hole cut.

Link

Cheers mate.

Any chance of pics of where the piping comes up from the cooler into the engine bay? And how it goes over the engine bay to connect it?

Much appreciated