Jump to content
SAU Community

Bride Brix Ii - Gradation

AnDyStYLe
 Share

Recommended Posts

AnDyStYLe Community Regular

AnDyStYLe

Posted
Posted

Hi All,

Time to let go of this seat :)

Genuine Bride Japan item, none of this bs fake!

Shit included are:

- Seat (black)

- Side bolster protectors (black)

- Spare black middle back cushion and ass cushion (to change around with the gradation cushions)

dsc00005qe.th.jpg dsc00007e.th.jpg dsc00009ps.th.jpg dsc00010n.th.jpg

The Brix II is a discontinued item so you can't get it brand new anymore. The condition of all is as new, very well looked after (as shown in the pictures). Everyone that knows me knows that I'm anal as about my car and parts!

The material on the version II's are much more superior to the shit material that comes with version 1 and 1.5's which as most owners know tear and rip! Also another note is that genuine Bride Brix II's have removable middle cushions (as per above), so if you come across ones that don't you can be sure that they aren't genuine items!!!

Anyway, I'm after $900ono for the lot above picked up...

Location is Burwood East Vic. Shoot me a pm for any interest!

Cheers,

Andy

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • r32-25t
      GReddy Injector Help!

      By r32-25t · Posted

      You need the kit turbo taipan has shown you because that manifold ia designed have side feed injectors 
    • alexburns
      Stagea Dash Multimeter

      By alexburns · Posted

      @johnnysr22 did you end up installing the little screen thingy and did it work ?>   
    • Lithium
      Boost level and torque curve

      By Lithium · Posted

      There is a LOT of stuff that can be done, it all depends on how much time and money you want to spend on doing in.  Not all ECUs will be able to do it, and the more control you need the more time and knowledge needs to be put into making it work.  If you're willing to spend the time and money and have the right hardware and skills involved there's a lot that can be done. 
    • thx78
      Boost level and torque curve

      By thx78 · Posted

      I am impressed with all this level of adjustment. I didn't expect all this possibility
    • Lithium
      Boost level and torque curve

      By Lithium · Posted

      Correct.  In the case of the 500kw dyno plot I showed you the car actually runs two boost control solenoids for boost control and a 5psi wastegate spring.  It allows me to control how much boost pressure is applied to both sides of the wastegate valve at any point and fairly accurately control boost target as a result. I've tuned it so that it's able to target anywhere from 5psi to 25psi depending on what's needed.  The target tables I've set up in that car are Gear vs RPM, so every gear has potential for a different boost (and torque) curve.   First and second gear have quite low boost targets, third gear actually has different target boost all the way through the rpm range as it's a stock RB25 gearbox - the boost targets have been chosen to maintain a peak of 600nm (what the owner has set as the maximum torque he's happy with putting through the stock 3rd gear) but it carries that to the rev limiter.   The boost curve to achieve that is something of a ramp up, then hold, then ramp up again and the power curve looks more like a flat line haha.  
×
×
  • Create New...