R34 Gtt - Will Exhaust For A Gtr Fit?

[MizzaR34]

Hey ppl,

Super quick introduction, brand new 1st time owner and forum member here. Been reading this forum on and off for years tho and finally have my dream car!! YaY (Well not a GTR - but skyline all the same)

My question is will a Kakimoto exhaust (or others), possibly the Full Mega N1 for a BNR34 fit my ER34?

I'm assuming it would, only thing that makes me ask is for the 32's and 33's there seems to be a lot of different products specifically for the GTST or GTR but with the R34 there seems to be a large % of stuff made for the BNR34 with no mention of the ER34 - is that because they'll fit the ER34 anyway?

Hope this isn't too noobish a question.. Cheers guys..

[PROXIMITY]

Gtr zorst will be the same from cat back. obviously front pipe arrangement is different so cannot be used.

Gtech have front pipes dirt cheap atm.

[Wheezy]

IIRC Trust list different part numbers for cat back (R34), something to do with the rear cradle geometry etc?

[wisey18]

I've got a NISMO GTR exhaust on my GTT and YES it HAS to be modified to fit. It's only very slight. About 100mm of pipe cut between the middle muffler and before the bend and some new stainless welded back on and that's it.

[Wheezy]

I've got a NISMO GTR exhaust on my GTT and YES it HAS to be modified to fit. It's only very slight. About 100mm of pipe cut between the middle muffler and before the bend and some new stainless welded back on and that's it.

The bend before going over the axle? pics?

[wisey18]

Just above the red line is the new section. My exhaust doesn't have the middle muffler as you can see.

[MizzaR34]

Cheers, thanks for the info. Think I'll stick to a Kakimoto and get it modified then.

[Wheezy]

so you added the 100mm before or after installing the extra 100mm? it is unclear to me.