R32 Gtr N1 Brake Master

[Kaido_RR]

Hey,

Just wondering what is the best way to get the brake lines from an r33 gts-t (s1 nonabs) to line upto the R32 GTR Vspec N1 Brake Master.

R33 Gts-t

R32 N1

as you can see the n1 is on the side and the r33 is at the front on the top, i try bending the lines but there isn't enough play to get them into line

[Ryno]

Most good brake specialists, should be able to make up an extension so it will reach. It's often cheaper than you think too.

I had custom braided brake and clutch lines (all ADR approved) made up from a brake place in Toowoomba, and they came in cheaper than what you can find on ebay. That same place can also make the hard lines that you are having trouble with.

Good choice on the Master Cylinder, I run the same in my R32.

[s13_Skyline_inside]

how can you visibly tell if its an N1 master cyl or a normal gtr one?

[Ryno]

how can you visibly tell if its an N1 master cyl or a normal gtr one?

The one in the above picture is the N1 item. It is a non-ABS 1" Brake Master cylinder.

My understanding is most other GTR Brake Master cylinders are ABS ones, and don't have the three outlet ports like in the above picture.