Jump to content
SAU Community

M35 Steering Wheel Controls

neotropic

By neotropic,
in Four Door Family & Wagoneers

 Share

Recommended Posts

neotropic Apprentice

neotropic

Posted
Posted (edited)

I have noticed that cruise control is a very rare option on the M35 and it is even rarer to find a car with both the audio and cruise control buttons on the streering wheel.

In the USA the Infiniti G35 looks to have exactly the same steering wheel but with both audio and cruise control buttons as standard.

Does anybody know if it would be possible to buy a G35 steering wheel from the USA, fit it to an M35 and use the audio buttons to control an aftermarket head unit and the cruise control buttons to control an aftermarket cruise control unit such as the AP800?

Edited by neotropic
Link to comment
https://www.sau.com.au/forums/topic/308910-m35-steering-wheel-controls/
Share on other sites
andy65b Veteran

andy65b

Posted
Posted
I have noticed that cruise control is a very rare option on the M35 and it is even rarer to find a car with both the audio and cruise control buttons on the streering wheel.

In the USA the Infiniti G35 looks to have exactly the same steering wheel but with both audio and cruise control buttons as standard.

Does anybody know if it would be possible to buy a G35 steering wheel from the USA, fit it to an M35 and use the audio buttons to control an aftermarket head unit and the cruise control buttons to control an aftermarket cruise control unit such as the AP800?

You don't need a new steering wheel. You get these features fitted locally.

The Stereo unit is about $60 and there is a DIY on the forum for this.

The Cruise control is not a DIY, but Chris Rogers (Audio Express) can install cruise control and uses the factory buttons so it is a very neat job. Cruise on these cars is not a cheap option as the throttle is controlled electronically. But it is good to have IMO.

Chris is on this forum so you can send him a PM or get his phone number from my signature below.

Cheers

Andy

Paramour Proficient

Paramour

Posted
Posted
You don't need a new steering wheel. You get these features fitted locally.

The Stereo unit is about $60 and there is a DIY on the forum for this.

The Cruise control is not a DIY, but Chris Rogers (Audio Express) can install cruise control and uses the factory buttons so it is a very neat job. Cruise on these cars is not a cheap option as the throttle is controlled electronically. But it is good to have IMO.

Chris is on this forum so you can send him a PM or get his phone number from my signature below.

Cheers

Andy

Where does one get the steering wheel controls for the stereo. . .

How much is the cruise control. . I agree worth it for the long trips and better on fuel I would suspect. .

andy65b Veteran

andy65b

Posted
Posted
Where does one get the steering wheel controls for the stereo. . .

How much is the cruise control. . I agree worth it for the long trips and better on fuel I would suspect. .

Chris rogers for both stereo controls and cruise control. I believe it is around $900 for the cruise control.

Cheers

Andy

S@int Newbie

S@int

Posted
Posted
You don't need a new steering wheel. You get these features fitted locally.

The Stereo unit is about $60 and there is a DIY on the forum for this.

The Cruise control is not a DIY, but Chris Rogers (Audio Express) can install cruise control and uses the factory buttons so it is a very neat job. Cruise on these cars is not a cheap option as the throttle is controlled electronically. But it is good to have IMO.

Chris is on this forum so you can send him a PM or get his phone number from my signature below.

Cheers

Andy

Hi Andy, I was wondering if you could post the link to the DIY for the stereo controls... I can't seem to find it... Cheers

andy65b Veteran

andy65b

Posted
Posted
Hi Andy, I was wondering if you could post the link to the DIY for the stereo controls... I can't seem to find it... Cheers

ooopppss. sorry my bad. I is not on here. I mus have been told on a phone call.

Before you start this procedure make sure you turn your stereo off and the CDs are correctly parked in the mechanism.

The basic procedure is.

1. DISCONNECT BATTERY

2. remove screws on either side of steering wheel, on the back facia of the wheel behind a little pop in bolt cover. This screw is a torque head screw (star pattern). This can be quite tight as it has lock tite on it.

3. The centre of the steering wheel will no come out (the airbag), as you pull out you will see a plug connecting it to the car on the top edge. This plug has a safety mechanism to stop the plug poping out. The black part of the yellow plug needs to be lifted up to release the plug. Put the Airbag aside.

4. You can now see the horn mechanism that floats on the inside. On the left side you will see a grey plug with a wire running from it connecting to the horn mechanism. Remove this grey plug as your new controller will replace this.

5. Undo the central nut holding the steering wheel in place.

6. Once removed you will need to undo the screws that hold the horn mechanism in place, this will release the pannel that covers the access to back of the steering wheel.

7. You should now have access to the back of the steering wheel to undo 2 screws that hold the silver blank in place. Undo and replace with controller.

8. Run wires around and plug grey plug into hole.

9. Do the reverse of dissembly to complete conversion.

This should not take more than 1 hour.

Good luck.

neotropic Apprentice

neotropic

Posted
  • Author
Posted

There is good thread on the G35 Driver forum in the USA which is a guide to replacing both the audio and cruise controls:

http://g35driver.com/forums/body-interior-...3-04-coupe.html

I presume it would be a similar procedure for the M35.

Chris Rogers Grand Master

Chris Rogers

Posted
Posted

tis exactly the same.

as for cruise control $900 fitted in any state. the unit will be sent to a workshop for fitting. buttons fit ON THE WHEEL.

as for fitting the buttons it to ANY cruise unit - nup! this is a custom unit I had done and I market it as such. buttons are NOT stock either.

Paramour Proficient

Paramour

Posted
Posted
tis exactly the same.

as for cruise control $900 fitted in any state. the unit will be sent to a workshop for fitting. buttons fit ON THE WHEEL.

as for fitting the buttons it to ANY cruise unit - nup! this is a custom unit I had done and I market it as such. buttons are NOT stock either.

Pics please

Chris Rogers Grand Master

Chris Rogers

Posted
Posted (edited)

here you go:

DSC_3210r.jpg

UNIT

DSC_3211r.jpg

buttons in place.

from memory this was a M35 stagea that I used for the photo. the radio controls are a by product of the cruise. if you have the integrated 6 CD unit then they will simply work.

Edited by Chris Rogers
Chris Rogers Grand Master

Chris Rogers

Posted
Posted

ok I'll post a link up. my IP lockout thing must be in play. I can see the images and I forget that everyone else cannot.

click this:

http://www.audioexpress.com.au/site/index....rt&Itemid=1

Son Gokou Collaborator

Son Gokou

Posted
Posted

Chris,

Can you also modify the cruise control / audio control to lit up the steering wheel?

So at night, they can be seen?

Like this DIY on the G35Driver.com?

http://g35driver.com/forums/body-interior-...3-04-coupe.html

Chris Rogers Grand Master

Chris Rogers

Posted
Posted

the later G35 WAS lit. the button set was different and had a lighting feed INTO the column. they light up green. in that case he swapped them out for the later items. nothing new there. and to be honest - not worth it. the lights are fairly dull in comparison to the dash lighting. I CAN get those switches but they are TWICE as expensive as the ones I currently use.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Jumbotron
      Parts required for 4:11 diff gears in an R34 GTR Vspec (A-LSD)

      By Jumbotron · Posted

      Hey was wondering if you ended up installing the R33 GTR speed sensor - I found one too and wanted to confirm it's a direct swap into the R34 6 speed?
    • njdgomez23
      How to fix centre console latch.

      By njdgomez23 · Posted

      After 23 years of owning a Skyline, finally had the latch go.  Followed this guide,  works like a dream again. Great Guide 👍
    • marni
      I need more than help to finish my R33

      By marni · Posted

      Hi all,   I’ve got the biggest lot of problems with my R33 GTS-T   It was a freshly rebuilt 25th anniversary RB25DET (plastic cas, neo cams) probably 6 years ago now   The engine was running so well but I fkd up badly and trusted someone I’d known for 10 years that was well known around Plazmaman for his welding and fab work. I added a lovely photo of some of his previous work. Not sure why my car was worked on by whoever did this shit     I’m normally someone who would never open myself up to something like this, I still can’t believe I did it. Trusting him literally fkd it all up for me. Everything has been a struggle, like it’s almost been 6 years that’s how much I’ve just on and off been trying to work it all out.    All I wanted was a car that danced down low, like full boost from around 3~3500rpm to redline, don’t really care what power it puts down (if it ever does) but I just wanted it to be quick to get on it.    He recommended the turbo to get, I picked Hypergear but he told me to get the front 4” with a T4 and 0.68 rear housing.    I was expecting all these beautiful welds, tidy fab work and paid for it to be ready to go to a tuner when I got it back.    I got a car back that was an absolute mess, I actually couldn’t believe it was my car anymore. I don’t think you could even call what he did welds, they’re disgusting.    So I stripped everything he touched off it and with every bolt I loosened it just got worse and worse.    I covered it and literally built and finished another car in the meantime but now it’s getting to the point where I really want my Skyline back.   Its a struggle because I paid him to do all this shit because I didn’t know how to and now I’ve had to try and figure it all out omg    Please excuse the bird shit horrible welds, I’ve got my show pony car and am so beyond dealing with this car I don’t even really care at this point.    If someone told me about what he did to my car I wouldn’t have believed them but it happened to me. It was unbelievable. He went missing, my car went missing, it came back missing parts, the straight af chassis rails bore the scars of being dragged up a trailer backwards, even the sandwich plate was bent. Everything was leaking and open to whatever fell into it, rounded off/ missing bolts, power steering oil and coolant everywhere, no gaskets, parts stolen off it, even managed to damage the sump pan.   Promised me he’d finish the car, knew what it meant to me, I paid him thousands and thousands just for him to trash it. He told me he was fully licensed and insured, come to find out he’d cancelled his ABN, so obviously no insurance. I had laid up insurance on the car and would’ve been covered but I was scared they would’ve written it off or because the business was no longer trading I’d still be liable.    He was supposed to:  New fully custom mild steam pipe exhaust manifold with turbo location moved from factory position to high forward mount. (I don’t know if it is a mild steam pipe, I’ve got a funny feeling the waste gate isn’t in a very good position and I don’t think the outlets off each cylinder are equal) 4” custom stainless steel dump with external gate (he re-plumbed it) Cut and shut OEM intake manifold with throttle reposition (I ended up doing the throttle reposition) Box in pod filter (left out) New 100cel catalytic converter (pretty sure it’s there but unsure if it’s 100cel) Front mount intercooler piping fabricated to suit (all smashed up and rusty holes where he was supposed to make it look standard where fmic piping passes through. I don’t even think my front bar is going to fit 🙄) Custom 5” intake pipe from pod to turbo (didn’t come with it so had to do something to make it work with the Z32 afm)   Engine: Full cylinder head service & machining  Brand new valves Precision upgraded spring kit Engine block honed New bearings  New piston rings  New ARP conrod bolt kit New ARP head studs Cometic head gasket VRS kit   ATR43SS2 ball bearing turbo 0.68 rear housing  Turbosmart 45mm external wastegate (got delivered to the fab bloke, I’ve got no idea what spring is in it, I’m assuming the one that came pre installed) Walbro 260 fuel pump  Nismo 740cc injectors (tested to 880) Spitfire coil packs GCG FMIC RB25DET manual 5 speed 4:11 rear diff   I’ve got an Apexi Power FC in it atm, I was hoping to just get it to operating temp to make sure everything was okay before towing to a tuner but it’s over-fuelling too much. I don’t think that’s going to happen so i think I’m going to get either a Link G4 or Haltech for it. What do you guys recommend? I can’t work out the power FC so just gonna give up on that one     It’s got an exhaust leak coming from somewhere I can’t see 🙄    The fuel pressure was steady but now it like drops from 40 to 20psi randomly (noticed this yesterday)    I’ll attach pics of the shit he put on my car and the engine bay now as it sits    I really just need some help, I need a tuner in Sydney I can trust, I’d like to be with the car while it’s being tuned if possible, I know it looks terrible but unfortunately I’ve just got to put up with it for now and fix the cosmetic stuff later   Do you guys think the manifolds are going to be okay? Or do I throw the exhaust manifold and try again?   I don’t even think these combinations are going to work tbh   I know everything I fitted was rated to be able to take at least 400kW but most rated higher    If you’ve gotten this far I really really appreciate it 🙏 I don’t mind if you trash me or the car, I made a rookie error and f**k I’ve paid for it. As you’ll see 🙄  
    • r32-25t
      Attesa pump mount options / ideas? R32 gtr style.

      By r32-25t · Posted

      From everything I’ve heard you’ll be waiting a long time for  the parts to arrive 
    • GTSBoy
      R34 Manual conversion Speedometer

      By GTSBoy · Posted

      Have you looked at the workshop manual?
×
×
  • Create New...