Jump to content
SAU Community

To Spray Or Paint

DIOR 33

By DIOR 33,
in South Australia

 Share

Recommended Posts

DIOR 33 Veteran

DIOR 33

Posted
Posted

Hi everyone my front bar is all fixed now actually has been for about a month now and i dont want to put it on till its painted

my best mate is ment to paint it but it obviously hasnt happened

i know i can buy spray cans from autobarn to my paint code but how much of a difference will it be from spraying it from a can to a spray gun and obviously get someone who knows what they are doing

Ta

xx

Link to comment
Share on other sites
RubyRS4 Grand Master

RubyRS4

Posted
Posted

Kellie, if you can get the paint matched (exact paint code) for your car, I've got spray painting equipment here (and I use to be a spray painter by trade). I'm doing my front bar the first weekend in March. Can fit yours in too if its simply a spray paint, no prep/sanding. I'll have some clear to go over the top too left over.

Keep in mind tho I'll be in my garage ... no spray booth or baking oven. I've sprayed all my bikes (GSXR and TLR) so you've seen the quality of my work.

:D

I'll do it for you seeing as you're a good mate. I don't do private jobs anymore ... so no one else need enquire. Sorry.

Link to comment
Share on other sites
DIOR 33 Veteran

DIOR 33

Posted
  • Author
Posted

:) roo have i ever told you that i love you so much :) thankyou but i also cant get something for nothing you know i dont like doing that so there for ill bring the JACKS :)

also there is no priming or sanding to be done all is good Ricky did that for me when he re glassed it

Link to comment
Share on other sites
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      Once the airbag is off, to remove the steering wheel.... Undo the 2 plugs into the clock spring, and the horn connector from it's clip. Hit the 19mm nut with a rattle gun (preferably) or if you don't' have one, you probably want an assistant to hold the wheel in place while you use a breaker bar to undo the nut Then, screw the nut back on 3 turns, and pull the wheel sharply towards you. If that doesn't work hit it medium force with a rubber mallet on either side, or possible behind if you can get there. If that all fails (it shouldn't!) you might need a steering wheel puller
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So, to next task....the carbon fibre steering wheel was either an expensive factory option or a chinesium special. Either way, I don't like either the flat bottom or thick ring style, so it had to go So...to remove the steering wheel.... First, disconnect battery negative and stop on the brake pedal for a few seconds. Then, remove the small circular covers on each side of the wheel's rear surround to uncover the airbag clips. You need to push something like a flat bladed screw driver through, you need to push the steel clip inwards and pull the side of the airbag forward. Once you've done the easy side, same on the centre console side. You can see the tab you are shooting for circled in red Then, disconnect the horn spade connector and for the yellow airbag plug you need to get something small under the black locking tab to pop it out, then the connector releases......airbag is off  
    • alexburns
      Interior Light Problems

      By alexburns · Posted

      @99RS4just wondering if you ever took photos of the footwell lighting / how you bypassed the controller, im keen to haver footwell lighting come on when I open the doors too   
    • Duncan
      GReddy Injector Help!

      By Duncan · Posted

      Ultimately, if the tip is not far into the runner and the o-ring seals, then you are in business. Have you applied pressure to it as is? It is not really a problem for the injector to twist once it is bolted down, the oring seals it and you don't want it jambed into the oring too hard The plenum is intended to take multiple size lower injectors with different adapters, but the way you have it is fine if they seal.
    • RB25inside
      Compatible rear drive shafts R34 N/A?

      By RB25inside · Posted

      Are these the Dmax ones you are in reference too? https://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35#description Not a bad idea to get the uni flange ones. I have sent just jap an email too. Will see what they say lmao. Only thing is the Dmax ones are on a big back order. Low key anything will be better then my OEM ones I got as they are sounding like popcorn when I go under load lmao 😂☠️🪦.
×
×
  • Create New...