Jump to content
SAU Community

Gtr, Gtst & Stagea Parts Clear Out

rb30dett
 Share

Recommended Posts

rb30dett Rising Star

rb30dett

Posted
Posted (edited)

GTR Parts suit 32/33:

r32 gtr diff perfect condition very low k's mech lsd $650.00

R33 gtr A lsd, perfect condition low k's $450.00

R33 gtr rear axles perfect condition $200.00

R32 gtr Rear alloy hubs $150.00

R32 gtr booster and master $120.00

R32 gtr ABS unit $100.00

GTR diff modified for rwd $300.00

R32 gtr rear cradle $40.00 (bare) needs bushes and clean up

R32 gtr rear calipers $200.00

R33 gtr twin exhaust from twin td05/6 turbo set up 4" single after diff (big power system)$550.00

XTR/subzero 62mm ext wastegate huge gate never used V bands included $800.00

R32 gtr gearbox good condition push type $500.00

Apexi air pods good condition $120.00

HKS mushroom air pods $100.00

GTR front pipe twin 2.5" stainless x something brand $150.00

R32 gtr standard rods n pistons x6 $250.00

GTST 4.1 viscous lsd good condition in $200.00

GTST ghetto 3" dump pipe, has flexi joint and some repairs worked fine $80.00

Stagea auto box (cut wiring) ran perfect $150.00

Stagea dash c/control pieces 78000ks = offers

post-15049-1266737210_thumb.jpgpost-15049-1266737231_thumb.jpg

post-15049-1266737389_thumb.jpg

I have more parts to add and will update pics as I can, location: South of brisbane phone 0431787453

More pics..

post-15049-1266740159_thumb.jpgpost-15049-1266740191_thumb.jpg

post-15049-1266740220_thumb.jpgpost-15049-1266740245_thumb.jpg

post-15049-1266740259_thumb.jpgpost-15049-1266740281_thumb.jpg

post-15049-1266740298_thumb.jpgpost-15049-1266740321_thumb.jpg

post-15049-1266740351_thumb.jpg

Edited by rb30dett
Link to comment
https://www.sau.com.au/forums/topic/309090-gtr-gtst-stagea-parts-clear-out/
Share on other sites
rb30dett Rising Star

rb30dett

Posted
  • Author
Posted (edited)

Some reason I can't edit?

Power fc + controller suit r32/33 gtr $850.00

Stagea 5 stud hubs front & rear suit 5 stud conversion $150.00

Jaycar boost and fuel controllers wth hand controller $140.00

HKS coilovers suit 33/34 gtr perfect condition just little surface rust $950.00

R32 hicas rack $30.00

R33 hicas rack $50.00

Edited by rb30dett
rb30dett Rising Star

rb30dett

Posted
  • Author
Posted

More:

rb25det ser 2 from stagea so 4wd block short motor $300.00

rb25det complete head, cams valves etc vgc $600.00

GTST used turbo, needs seal kit bearings good wheels good just leaking oil past seals $120.00

GTR standard dumps $50.00

The following parts will not be removed until deposits are taken for all.

Have a Mines step 3 package on the stagea so will be selling (rb26)

HKS 2530's older style with HKS cast iron dump pipes $2200.00 vgc

Mines afm's plug in same as nismo's but these are supposed to be better $500.00

Mines ecu tuned for 2530's afm's 600cc injectors and fuel pump (runs great) $300.00

Nismo purple 600cc injectors been cleaned and flowed resently $600.00 pc

GTR 600 x 300 x 100 mm cooler looks like greddy but no markings $500.00 vgc

Will do a package deal for the lot $3500.00 300rwkw easy This is advertised locally so may sell off the forum.

rb30dett Rising Star

rb30dett

Posted
  • Author
Posted (edited)

Standard gtr sump & diff $300.00 vgc

R32 gtr front subframe vgc $150.00

R32 gtr steering rack vgc $120.00

R32 bare front cut $200.00

R32 gtr steering colum with key $100.00

R33 standard ecu $200.00 pc

Edited by rb30dett
rb30dett Rising Star

rb30dett

Posted
  • Author
Posted (edited)

Sorry for the delay guy's I work long hrs

KamikazeNinja34: Are you talking the location of the speed sensor? its front.

JnJ: South Maclean/Jimboomba

ydawak: No sorry not stagea

Front pipe & HKS pods sold

Make some offers I need the space.

Edited by rb30dett
nissan32GTR Explorer

nissan32GTR

Posted
Posted (edited)

thanks heaps paul, good to meet you..guys very easy to deal with, good prices.... highly recommend!!!

bought GTR front pipe and HKS filters :)

Edited by nissan32GTR
rb30dett Rising Star

rb30dett

Posted
  • Author
Posted (edited)
lol i mean that for a car thats purported to have two diffs powering its awd system, my rear diff is starting to lock up :P

So you want a rear GTR diff then? A lsd or mechanical? don't think there is a diff between ser1-3 only Vspec or non Vspec I also have a Stagea diff they are all in perfect working condition, The diffs listed are rear diffs there are pictures of both?.

Cheers

Edited by rb30dett
rb30dett Rising Star

rb30dett

Posted
  • Author
Posted
Standard gtr sump & diff $200.00 vgc

R32 gtr front subframe vgc $80.00

R32 gtr steering rack vgc $80.00

R32 bare front cut $200.00

R32 gtr steering colum with key $80.00

R33 standard ecu $200.00 pc

Prices are neg throw me some offers

  • 7 months later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Ticking Sound On Idle - Rb25

      By MBS206 · Posted

      Have you put an aftermarket oil pressure gauge on and verified your oil pressure?   Noise being on the block, on exhaust side, how high up the block does it seem to be? It could be the VCT system getting cranky, especially if it's mainly at idle, and when warm, as that'll be your lowest point for oil pressure. Could be showing that oil passages / VCT solenoid are blocking.
    • WARLORD
      injectors top feed for sale

      By WARLORD · Posted

      Deatschwerks 1800cc sold
    • GTSBoy
      Ticking Sound On Idle - Rb25

      By GTSBoy · Posted

      Well, hydraulic lifters will get noisy if they are dirty/fouled in some way, and exactly how that manifests will depend on exactly what schmutz is where. There is a procedure on here somewhere for dismantling and soaking/cleaning them. Replacing them with new is about 50% of the work and about 5% of the money!
    • myrbgivesmeheadaches
      Ticking Sound On Idle - Rb25

      By myrbgivesmeheadaches · Posted

      Thanks for the reply @GTSBoy this is is a hydraulic lifter engine. Yea right i did not realise the lifters were supposed to be compressible while installed. I could push them down but i had to lean almost my while body weight on them.  I have never heard of a lifter/ lifters ticking only at hot idle and getting worse the hotter it gets. I have owned a few jdm cars with noisy lifters. This noise is slightly more subtle, it is more of a sharp gentle metalic tic than the solid and more loud tapping I've heard on lifters. I have used a metal rod, alloy tube, hose and stethoscope and could not find the source of the tick. But it appears to be loudest on the actual engine block behind the exhaust cam gear and next to the oil filter. I had mate (40 year old mechanic) go over it with me and he couldn't find it either..  Could it be a cam seal issue of some sort?  Cheers  
    • GTSBoy
      Ticking Sound On Idle - Rb25

      By GTSBoy · Posted

      This seems problematic and unlikely at the same time. Vanilla RB2Xs have hydraulic lifters. They do have "zero" clearance, but only when running with oil pressure inside them. When not running, you should be able to compress them and obtain heaps of clearance. RB26s and Neos have solid lifters. They should have ~0.3mm and ~0.5mm on the inlet and exhaust respectively. If they have zero clearance then bad things are happening. With nothing else being wrong, it would mean that the valves would be held slightly (ever so slightly) open when they are supposed to be closed and it should have all sorts of problems when running, caused by leakage in/out through the valves. Or, zero clearance can indicate severe valve seat recession. None of it is good. Have you used a piece of hose as a stethoscope to try to localise the noise?  
×
×
  • Create New...