Jump to content
SAU Community

Recommended Posts

  • Replies 75
  • Created
  • Last Reply

Top Posters In This Topic

Im keen for a huge list of parts. Got cash waiting, so when it goes ahead let me know.

Mainly need rear bar, GTR front bar (as posted in the last pic), side skirts.

All in plastic to :P

  • 3 weeks later...
  • 2 weeks later...
  • 4 weeks later...

Hey Everyone im really sorry that about the massive delay its great to see that alot of people that show interested.

NOW to answer a few simple questions.

1. YES the group buy will still go through

2. Sadly there will be a delay, this is due to myself. as my R34 was involved in an accident which required me to purchase some parts leaving my financial funds a bit low. i have these parts and will be getting the car repaired shortly.

3. if anyone that is still interested in this could please PM me and i will send you my number so you can call me with any questions as lately it has been hard getting to a computer.

Thanks guys

and again SORRY :banana:

Daniel

Edited by Hybrid905
Yeah i believe aero image already have done that in QLD but i dont think he has it ready and he also is impossible to contact

So sad that Aussie companies can't design their own kits and just have to rip off other companies.

  • 1 month later...

Hey mate, sorry to hear about your car hey...

Just wanted to confirm if this is still going ahead.

I was interested in the front lip, like this one: http://www.nengun.com/east-bear/front-spoi...ior-term-bumper

and also the LED tail lights..

Also if its still going ahead whats a rough time frame..

Thanks again and good luck with the repair..

Pauly.

  • 4 months later...

Just to put a spanner in the works here, and again I'm in new zealand so postage mite be a problem, but I'm about halfway through making full gtr kit for the r34.

Factory fibreglass

front fenders,

front bar and lip,

2 peice side skirts

rear bumper,

50mm widebody rears,

and at a later date a full nismo skirt kit. Could be an option for some who are on a bit more of a budget, and again still not quite finished making moulds. Got couple bits to tidy up. Cost would almost be half that of the eastbear kit, but I couldn't offer a plastic version. PM me if you are interested in any parts, and possibly what parts of auz you live in and could find out quotes on postage

Just to put a spanner in the works here, and again I'm in new zealand so postage mite be a problem, but I'm about halfway through making full gtr kit for the r34.

Factory fibreglass

front fenders,

front bar and lip,

2 peice side skirts

rear bumper,

50mm widebody rears,

and at a later date a full nismo skirt kit. Could be an option for some who are on a bit more of a budget, and again still not quite finished making moulds. Got couple bits to tidy up. Cost would almost be half that of the eastbear kit, but I couldn't offer a plastic version. PM me if you are interested in any parts, and possibly what parts of auz you live in and could find out quotes on postage

sounds great, keep us updated. Some pics would be awesome too

Hey mate am Sydney based and also with the yen being not so good it is a bad idea to buy at this time if you want to order anything let me know if anyone would like to order any east bear parts atm please pm me with the part and where you are from so I can get a

Quote for you asap

Has anyone used the east bear front bar top mole?

It basically goes above the normal GTT front bar so that you can put a GTR hood on.

1_28_07_2006_13_14_Top%20Mole.jpg

If you know about this, how much for the top mole and standard GTR bonnet?

Cheers.

Edited by Jay11
Has anyone used the east bear front bar top mole?

It basically goes above the normal GTT front bar so that you can put a GTR hood on.

1_28_07_2006_13_14_Top%20Mole.jpg

If you know about this, how much for the top mole and standard GTR bonnet?

Cheers.

hey mate i dont believe you can buy it as a separate item it comes part of a set with the front bar

Hey mate, sorry to hear about your car hey...

Just wanted to confirm if this is still going ahead.

I was interested in the front lip, like this one: http://www.nengun.com/east-bear/front-spoi...ior-term-bumper

and also the LED tail lights..

Also if its still going ahead whats a rough time frame..

Thanks again and good luck with the repair..

Pauly.

hey paul,

i can put together an order just pm me with the parts and you the area you need to get them shipped to and i can put together a quote for you.

hey mate i dont believe you can buy it as a separate item it comes part of a set with the front bar

I've gotten a quote from Powerplay Imports for these seperately, so I'm not sure if the above is the case.

Mind, you the quote nearly made me fall off my chair ...

hey mate i dont believe you can buy it as a separate item it comes part of a set with the front bar

In the picture it's a standard GTT front bar so I'm pretty sure you can get it separately,

Just saw a price on a UK site for it..... it's almost $350 US for just that little top mole part shown in the picture between the front bar and bonnet...

I think I'll just stick with standard bonnet for the meantime and focus on something else haha.

Thanks anyway.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Oh, that's grim. Something bad has been happening there.
    • Put an endoscope down the hole and saw this. Not quite all around the bore but a good 60% at least. Chin to the chest and towards further disappointments I guess.
    • 2 does "sort of" applies, maybe......but looking at what parts would be needed for the swap to get engineered, registered, and insured, and basically that's everything under the car, the modifications the make it legal would be problematic and horrendously expensive, all for a street car that just cruises around and hits a few twisty roads on the weekends Also, from looking at the NSW rules and Regs, with all modifications that is required just to make the car safe and not twist itself to pieces, and then actually get registered for street use, may still be impossible nowadays As for 1, when you add in a fresh engine, fresh transmission, rear cradle and diff, tailshaft, suspension, brakes, cooling, and all the other fabrication required, your probably looking at up to $100k to do it right, all for a 20 year old MX5 that is over engineered and you would never be able to actually use the power it has on the street, much like your beastie, which I love, but you actually track that thing and can use all of its powers in anger, in a safe environment  Hell, the old Bogan Cruise Ship had more power than I could use on the street, and in hindsight, I went a bit silly on that thing, it didn't really need the 500hp it had for what I actually used the car for, it was fun, but basically unusable on the street if you value your licence  As for cams, yeah, I'll probably book it in for them to get installed and tuned soonish, like next month after MX5 Mania are back at work....... and yes, I've already sent a email to bin the turbo quote and quote instead to install cams and a new Fluidampr balancer that will suit the 2.5 better than the OEM 2.0 balancer that is swapped over for the 2.5 install, as the balancer needs to get pulled to time the cams it's a while your in there sort of thing I did think a bit about flex fuel for a laugh, but being na, and no where really around locally anymore to get E85, I've binned that idea, so no sweet sweet corn smells are set for the car I wish E85 was more of a standard fuel, it's better for the environment, better for tuning, plus that sweet sweet smell we all love As for fitting in the family, that's not needed, as everyone in the family already owns a car that can seat 5 humans comfortably enough, the MX5 is "my toy" As for buying a car that is already built, nah, I would rather pick and choose my parts, I enjoy the process, and in the big picture, the additional cost is well worth the enjoyment, and the occasional frustration, I get out of doing it, albeit with other people spinning the spanners, and me, just paying the invoice 🤣
    • Excuse me, but 2) does apply 1) Would also apply if you consider how much is spent in the alternatives. Also there's the option of 3), buy one pre-built that you can put your family in (it's me, it's my car)   That said, I went on a ~500km drive the other day. I didn't use anything more adventurous than 3rd/4th gear at about ~3000RPM and 50% throttle and I was going as fast as anyone has any sense doing on a public road, with enough grip to the point where I didn't want to go any faster. I was obviously under the limit of the current car etc etc. MX5 with 2.5 N/A to achieve the same speed would be more fun for any road scenario. Maybe consider cams. I wouldn't boost it. The use case is just not there and it won't actually make the car more enjoyable unless you really do plan on wringing gears from 1st to 3rd (at least) at 100% WOT on a public road to 150+kmh.
    • Great if: 1. You had all of the money for everything else that is required  2. Lived in a country where you could actually do this and drive it legally on the road Sadly, neither applies to me As for the turbo, I am having second thoughts, mainly for engineering/registration legality reasons and insurance  Not saying I've finished doing stupid things that I probably should do to the MX5, but boost, and V8 engine swaps isn't on the cards Strange, but true 
×
×
  • Create New...