Jump to content
SAU Community

Recommended Posts

OK scenario... 10" wide guards, and only 9" wide rims, meaning rims woul be an inch inside the guard.

Firstly can you use spacers to being the wheel out to sit flush with the guards

and secondly, how far out can it go, ie can it be brought out about 2 inches or so? (Trying to fit regular GTSt rims under a GTR front guard without having to change rims.)

Thanx 4 ur help

I have used spacers in the past with great results. The car felt much more stable in corners too.

Just be sure to get HUB CENTRIC spacers. These are designed with an extra little lip which make them safe to use. The spacers I bought were very expensive, german H&R hub centric 15mm fronts and 20mm rear. Car looks fat!

big_spacer.jpg

Hmm its either that or I buy a set of Work Rims for a GTR... hmmm I'm lookin at bringing them out about 20 to 24 mm so dunno if its worth the hassle.

  • 6 months later...

Just reviving this thread as I am interested in getting 5-10mm spacers for my GT-R to make it LOOK that much tougher.

A) I know spacers are defectable but they'd never look there. Spacers don't tend to stand out too much visually.

B) So long as they're hub-centric and also bolted on to the hub they're safe.

C) They won't necessarily stuff up your geometry. In fact, according to tests with spacers in OPTION Magazine they will make your lap times FASTER. Yes. I have the magazine where they test different width spacers on track and record their lap times and times were reduced with spacers on. Now that's some good real world testing which cleared things up for me as I know my last car felt flatter through corners with spacers on.

You are limited to an extra 20 or 25mm (can't remember which) of track width, which is centre of tyre to centre of tyre, not outer to outer, but are also limited tyre width wise.

Increasing the track increases your scrub radius which puts a little extra load on the steering rack, but shouldn't break anything, and certainly won't upset suspension angles

I must not be drinking as much as i used to, once upon a time i would never have remembered something from thsi long ago :( See here for what may fix your woes provided you dont co crazy with track increase
Why are we always lurking in the same threads Roy? I can look at a topic and bet myself that Roy will be there soon or has already been and I always win :rofl:. Wish powerball was that easy.

Anyway that linked thread also discusses welding of wheels which is covered under Vic Roads website and is legal according to the standards, but back to topic, blocks are legal, spacers are not (the not bolted in things) as they limit the thread capture for the nut and a whole heap of other things us engineers talk about to confuse people.

R32 GTR's definitely need about 10mm per side as they look silly on standard wheels and all that guard overhang.

Why are we always lurking in the same threads Roy? I can look at a topic and bet myself that Roy will be there soon or has already been and I always win :). Wish powerball was that easy  

LOL, i think its because we happen to think along similar lines and share same approach to modding a car...sorry to say Geoff but you may need help, the kind you can only get from a prefessional, ive already seen a few and there is no helping me, but we must hold onto our faith :rofl:

Im all set to try some spacers if my new but wider track rims dont fit all that well :(

I'm looking for about 25mm spacers for my R34 GTR rims on my R33 GTR, they need more offset :D

$500 bucks for jap bolt on ones... can anyone give me some advice? can i get them cheaper/better?

Hey man i also had to get bigger spacers becasue of my wheel size on my cef, 17x9.5s. Yeah they stick ou like 5mm. :wassup:

cost me 200 bux for a pair of 21mm spacers. Here in sydney.

U have to send em your rim thou to match. (since your in vic)

Name: Neale Wheels - (02) 9642 1002

Also had to get longer wheels studs as well. 75mm size for 6 bux each as well.

Let me know if u still want to get some done. As i know of a few places to look for in vic.

ceffo.

your hubs and wheel stubs and studs are usual engineered for a certain amount of stress .. hence the max of offset ppl use and what wheels are manufactured to

.... there's a point where u have too much offset and your suspension suffers greatly ... look at buying wheels with more dish .. like a +9mm offset .. as standard is about +27mm or is it negative .. i forget ...offset your rims .. not your studs

spacers are a no no ...generating more lateral stress on your stub and wheel bearing .... hence shorter life span in that regard.

MT

  • 4 months later...

time to do some digging out of an old thread...

there is a guy that has 18x8 350z track rims - I'm considering whether they'd be good for the GTR with 20mm spacers as road wheels.

What's the widest on a 8" rim? 235 I'm assuming

Geoff / Roy - what do you think of this?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would like more noise related info for my truly uneducated guess  Does it do it at idle or when revving, clutch engaged, and disengaged? Does it only do it when the car is moving? I've heard "similar" noises from a clutch pack that left the chat room, and CV joints that have chewed themselves out But as Matt said, how's the yokes, tailshaft and centre bearing going after their last little issue Fingers crossed it is something simple  Weird noises make me cringe 
    • One other question, is there a chance that changing the idle speed can lead you down a rabbit hole and is the reason the tuner didn't touch it? Reason I ask is because if that's the reason the tuner avoided it then I probably shouldn't be touching it lol.
    • Pfft. As if I'd ever point a high pressure washer at my car.
    • The nature of my commute has changed. Way back then it was traffic lights all the way, for ~28km. It sucked. When they finally stitched the expressway together I could do a good 15+km of it at a steady 80-100 with no stopping. That alone has gotten me down to flat 10s. Prior to that it was mid-high 10s. I can't remember the delta that I saw when I got the idle down. It was only ~150 rpm, because the idle speed was never terrible, but for the delta in consumption to be noticeable it would have had to have been at least 0.2-0.3 L/100km - which is not to be sneezed at when it comes for absolute free. It's only about 50L per year, but that's ~$100. A few extra pizzas is always welcome. Note that I have a record of every tank of fuel that has ever gone through my car except for a handful put in by someone else, like my mechanic. I can show you the difference between stock RB20 and tuned RB20, stock RB5Neo and tuned, winter and summer fuel blends, winter and summer fuel blends when the ambient temperature is not appropriate for the blend, working O2 sensor, blown O2 sensor, boosting f**k out of it and frightened to boost it because it is pinging, and so on. OK, I probably can't do all that now with 100% clarity - but at the time when any of those things were in event, you could see it in the records. There's 25+ years of simple tank after tank records, so you have to look for landmarks to work out approximately how old any single record is. What's really important is the meta data and that lives in my head.
    • If you're claiming the issues are not skyline specific, then either the USA is living in the 90s / early 2000s, OR you have the issue of "survivor bias". Which is you're mainly hearing and listening to those with terrible experiences, and haven't found the guys who have cars with good decent builds and no problems. It happens in AU too, that plenty of people keep having issues, and they keep going to the workshops that are known to be shit "because I read on the internet". Even worse, are those who keep posting on the internet as though they know for a fact what something is, when they've never touched/looked at said item in their life, and again are making assumptions, based on something they read, or because it's a certain way in other cars. It's even funnier when those same people debate the facts with the people who've lived and breathed this stuff for over 15 years. Example, I've had someone tell me you can't do something with a Skyline, because they read it on the internet, except I can tell they're wrong, as I did that exact thing back in 2008 with my Skyline.
×
×
  • Create New...