Jump to content
SAU Community

Recommended Posts

Hey all

So basically i am new to the forum as I am new to skylines. I have recently bought a r32 skyline and need help as it has an afm problem due to one of the wires that goes into the plug has been snapped off just after the plug.

I took the plug off by cutting the plug and they got my dad to fix the plug for me. no dramas. One i had the plug fixed and ready to operate I just connected the wires dodgy to get it working to make sure everything was ok.

I reset the ecu by disconnecting the battery and then holding down the brake.

Once i reset the ecu I started the car and it would not idle. I had to hold the throttle fully open to JUST get it to idle and then once I let go of the throttle it stalls. I then disconnected the afm and start the car and it idled at about 1250 rpm. It idled rough but still better then when the AFM was connected.

Does anyone have any idea what the problem is? Anyone ever had this problem before?

Any help would be greatly appreciated. cheers Tyrone

Got a new AFM and it seems a little better but still has the same problem.

Did another ECU scan came up will fault code 12, which is the MAF sensor circuit. Could it be the wires connecting the plug to the afm as all for wires are only twisted together.

Also the engine will keep stalling and it won't rev past 4000 rpm.

Any suggestions? Any help will be really helpful.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You see R34 GTRs listed for 200-300k are they really selling for these prices? Kinda seems like the same ones listed all the time.
    • Only needed to pull out the seats, center console and gear shifter surround, took a weekend and a fair few beers. You get to look forward to finding all sorts of weird shit under the seats and carpet, I pulled out a Chinese dudes passport from 2003, 220 yen and a condom wrapper 😆
    • Well, turns out not a lot happened from back then to now, between life again, and working on 3 separate other cars (only one of which was mine, and will now be departing the household soon).   So I decided with the whole "don't go outside, it's a cyclone!" Turning in to being not a whole lot, I ventured down to the garage, found a couple of water leaks in the shed (the main one I've already fixed), and then ended up "stuck" as it started pouring rain, and I didn't want to walk back inside in the pouring rain. This meant I ended up taking a look at the Skyline, and trying to work out what past Matt had been upto. I retraced a few things out from scratch, added the rest of the power feeds in that I needed for the indicators, and headlights. Double checked I'd wired a few things up correctly (and worked out how I wired a few things to begin with), updated my sparse notes. Added one of the ground points. Oh, and got really really dusty, as the car is quite dirty. Wrote up quickly what should be left for me to do with the wiring too. Adding the below photos more for my records than anything else. I need to make myself a proper book for the car that details everything, and how I've done it, but for now, this is my records... The third image is my most important one for me, and I need to draw it out into a proper schematic eventually. The last photo is my re-written list, I'd have put it on the white board, except I had to take the white board down to fix one of the water leaks.
    • Can try Maxima. Or random Infiniti models from the same era. Good luck with your hunt, let us know what you find!
    • Shall we... wake you up when September ends?  
×
×
  • Create New...