Jump to content
SAU Community

R32 Afm Problem, Running Really Rough.

Freddie

By Freddie,
in Engines & Forced Induction

 Share

Recommended Posts

Freddie Contributor

Freddie

Posted
Posted

Hey all

So basically i am new to the forum as I am new to skylines. I have recently bought a r32 skyline and need help as it has an afm problem due to one of the wires that goes into the plug has been snapped off just after the plug.

I took the plug off by cutting the plug and they got my dad to fix the plug for me. no dramas. One i had the plug fixed and ready to operate I just connected the wires dodgy to get it working to make sure everything was ok.

I reset the ecu by disconnecting the battery and then holding down the brake.

Once i reset the ecu I started the car and it would not idle. I had to hold the throttle fully open to JUST get it to idle and then once I let go of the throttle it stalls. I then disconnected the afm and start the car and it idled at about 1250 rpm. It idled rough but still better then when the AFM was connected.

Does anyone have any idea what the problem is? Anyone ever had this problem before?

Any help would be greatly appreciated. cheers Tyrone

Freddie Contributor

Freddie

Posted
  • Author
Posted

Got a new AFM and it seems a little better but still has the same problem.

Did another ECU scan came up will fault code 12, which is the MAF sensor circuit. Could it be the wires connecting the plug to the afm as all for wires are only twisted together.

Also the engine will keep stalling and it won't rev past 4000 rpm.

Any suggestions? Any help will be really helpful.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      UniClutch

      By Dose Pipe Sutututu · Posted

      That ring thing is interesting how it's holding everything together 
    • elir32
      Rv37 400r questions

      By elir32 · Posted

      Hey guys. I have a 400R on its way to Australia from Japan currently and have a few questions I’m hoping others may be able to help with.   Wondering if anyone here has had any luck getting the Sat nav unit to work in Australia!? Assuming the Stereo is as simple as a band expanded and tv won’t work?  Seeing as they’re based off a Q50 which is Aus delivered is there any way to link that system to the nav? Nav modules and head unit are different part numbers and appear slightly different at the rear with plug ins etc. can I put my xtrail sd card into the rv37 and will that convert the maps or update to Australian? Has anyone got any advice here?     also has anyone fitted the factory remote start and Security system once it’s landed in Australia? I put an enquirey to Nissan Japan in via a third party, and they suggested it needs a Nissan Japan dealers device to setup and couldn’t guarantee if one here could do it or not. They can supply and I can physically fit it but to setup I would need a dealers device. Any information here would be appreciated also. I’ve seen one here with it fitted already prior to leaving Japan at a dealer/inporter, so clearly passes compliance and works when fitted Japan and doesn’t need changing here.      also, does the tyre inflation sensors work here? Does anything change with them when the vehicle arrives? Where are they actually situated? I’ve read they have batteries and they need to changing at times and seems like resetting involves the nav system?    any help here would be appreciated and any other aust specific information to help would be great. Looking forward to see what the current generation skyline is like and eager to see how many of the gadgets can be utilised here.  Thanks in advance 
    • Butters
      UniClutch

      By Butters · Posted

      Do need to take it with a pinch of salt. One of the adapter failures, they clearly had setup issues with the flywheel.  One of the slipping ones I spoke to and it was pretty clear the throwout was riding, rather than fix, just swapped to a new clutch.    These clutches are being put in anything from 5k offroad 4x4 beaters, GR yaris, 500hp commodores to 1200hp barra monsters. Bound to be some issues in some of them when they are not a simple bolt in affair due to the changes in height.    There is a lot going on in this picture and unless I did the job myself no way to tell what really happened. 
    • NZ-GTT
      R34 GTT Battery Relocation To Trunk

      By NZ-GTT · Posted

      I did this mod in 2019  You just have to modify the top bracket of the ABS/TC/Fuel Pump Control ECU so it sits more upright and closer to the back seat and run a good quality positive battery lead from the engine bay, the negative lead i just bolted down to the body in the boot.
    • Dose Pipe Sutututu
      UniClutch

      By Dose Pipe Sutututu · Posted

      Damn... Not the feedback I want to hear.
×
×
  • Create New...