Jump to content
SAU Community

1996 R33 Series 2 White.

Shazbanger
 Share

Recommended Posts

Shazbanger Community Regular

Shazbanger

Posted
Posted (edited)

Hey Guys.

An opportunity has come up which means i no longer need the Skyline.

It is an extremely clean white S2, with around 102xxx kms. Car has been serviced every 5000kms using only the best. Its been professionally detailed once a every 2 months, and washed weekly, only ever been run on BP Ultimate, and not boosted above 7psi since I've owned it.

New Oil Filter

New Oil

New Clutch less then 2000kms ago (Have receipts)

Brand New 18x8 Wheels and Brand New Nexen Tyres (Less then 500kms old)

New JVC Head Deck w/ Fusion mono block and Kicker Solobaric Sub (Has an iPod in)

Full Turbo back Exhaust

K&N Pod Filter w/ Cool Air Induction

Customized HMA533 plates.

Genuine Nissan Skyline Floor-mats

Boost Gauge

It is one of the smoothest Skylines i have ever driven, and has no rust at all (Feel free to bring along a qualified inspector).

Doesn't leak water, or have any creaks or rattles. Never has overheaten, and air con is icy cold.

Immaculate paint and body (Small ding on passenger sill at the bottom of the door and that's it, can arrange cheap paintless dent removal for fussy buyer)

Rego until April this year (Will pass roadworthy no problems, happy to get inspection for buyer)

Car has never seen the track or drag strip, and is used by myself as a daily to get to and from work.

As i am a Bank Manager, i can also arrange finance for any potential buyer at a low rate.

Located on the Northern Beaches, Sydney.

$13,500.

Pics below.

If interested, shoot me a PM.

Cheers,

Shannon

post-35783-1266829916_thumb.jpg

post-35783-1266829949_thumb.jpg

post-35783-1266829970_thumb.jpg

Edited by XS80ST
Link to comment
https://www.sau.com.au/forums/topic/309236-1996-r33-series-2-white/
Share on other sites
  • 1 month later...
  • 1 month later...
Shazbanger Community Regular

Shazbanger

Posted
  • Author
Posted (edited)

Hey guys,

Just done a full 100k service including;

New Timing Belt

New Water Pump

New Radiator Hoses

New Fuel Lines

New Oil Breather Hoses

New Cam Seals

New Belts all round

New Fluids all round (Gearbox, Engine, Diff, Coolant, P/S, Aircon Regas)

Have receipts for all work done.

Also, has just had a complete detail done just yesterday inclduing carpet, interior, exterior and engine bay. (30/5/10)

Will also drop the price to 11.5k ono. Registered until the 20/10/10.

PM me if you have any questions, or would like a time to come view the vehicle.

Cheers,

Shannon

Edited by XS80ST
FST513 Mentor

FST513

Posted
Posted

Have seen this going around the beaches, looks super clean! Good luck with the sale mate, shouldn't be a problem at all!

P.S. Totem carpark out the back where the photos were taken?!

Shazbanger Community Regular

Shazbanger

Posted
  • Author
Posted
  FST513 said:
Have seen this going around the beaches, looks super clean! Good luck with the sale mate, shouldn't be a problem at all!

P.S. Totem carpark out the back where the photos were taken?!

Hey mate, cheers.

Nah, photos were done up at Bunnings at the Belrose Super Centre, in the underground carpark. Epic place for pictures.

LNG 33S Collaborator

LNG 33S

Posted
Posted

g'day mate,

i got a mate near you who is very keen to have a look at your car, hes been looking for a clean S2 33 for a while now, new to the sight so he cant post yet! am posting for him, his number is below, if you could call him he would appreciate it! his names Elliott.

Cheers

0405 517 170

eiresgaus Proficient

eiresgaus

Posted
Posted

if this is still somehow for sale come the end of july (i pray it is) i'm definitely very, very interested. overseas for a month from tomorrow though.. how has this not sold since being posted in feb???

Shazbanger Community Regular

Shazbanger

Posted
  • Author
Posted
  eiresgaus said:
if this is still somehow for sale come the end of july (i pray it is) i'm definitely very, very interested. overseas for a month from tomorrow though.. how has this not sold since being posted in feb???

Gday mate,

I've had a lot of interest, and a few people come and look, but no one with cash available (Mainly people waiting for loans to be approved and whatnot)

I'm not in any huge rush to sell it, hence why i've declined offers previously, but if you are genuinely interested, and we can have a chat about it via PM.

Cheers,

Shannon.

JIGGABOO Rookie

JIGGABOO

Posted
Posted
  XS80ST said:
Hey Guys.

An opportunity has come up which means i no longer need the Skyline.

It is an extremely clean white S2, with around 102xxx kms. Car has been serviced every 5000kms using only the best. Its been professionally detailed once a every 2 months, and washed weekly, only ever been run on BP Ultimate, and not boosted above 7psi since I've owned it.

New Oil Filter

New Oil

New Clutch less then 2000kms ago (Have receipts)

Brand New 18x8 Wheels and Brand New Nexen Tyres (Less then 500kms old)

New JVC Head Deck w/ Fusion mono block and Kicker Solobaric Sub (Has an iPod in)

Full Turbo back Exhaust

K&N Pod Filter w/ Cool Air Induction

Customized HMA533 plates.

Genuine Nissan Skyline Floor-mats

Boost Gauge

It is one of the smoothest Skylines i have ever driven, and has no rust at all (Feel free to bring along a qualified inspector).

Doesn't leak water, or have any creaks or rattles. Never has overheaten, and air con is icy cold.

Immaculate paint and body (Small ding on passenger sill at the bottom of the door and that's it, can arrange cheap paintless dent removal for fussy buyer)

Rego until April this year (Will pass roadworthy no problems, happy to get inspection for buyer)

Car has never seen the track or drag strip, and is used by myself as a daily to get to and from work.

As i am a Bank Manager, i can also arrange finance for any potential buyer at a low rate.

Located on the Northern Beaches, Sydney.

$13,500.

Pics below.

If interested, shoot me a PM.

Cheers,

Shannon

nice car good luck with the sale!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      V36 wreck (edited from V37 by mod)

      By MBS206 · Posted

      I tried my best, well I see how it is though... It's time to be ruthless! I'll up my bid with a JVC sub and an amp to run it, 8 stainless steel drink coasters with a rubber backing, and a photo of Tom Cruise. Oh, I can increase the cash portion by 20 cents if that helps. 
    • MBS206
      Blue/grey smoke after idle

      By MBS206 · Posted

      Or if it's grey, is it watery? Does it do it after you've been for like an hour long drive it will still do it, or just near the start of the trip? As GTS said, does it seem like oil (blue), water (white/grey) or fuel (black)? Sometimes the colour can be hard to see clearly too for what it is, as GTS says, what's it smell like?
    • MBS206
      ugently need expert / experienced opinion

      By MBS206 · Posted

      I wonder if part of it has to do with when you've each bought the kits. I honestly have the feeling that the silicon joiners in the 2000s were actually better quality than most of what you can find these days. Even in the same brands. Everyone racing to the cheapest price while still trying to make profit means lower quality parts. For coolant, I personally would be going with rubber, OR, converting the radiator and engine to use the huge AN fittings hose for radiators.
    • dbm7
      Shifting questions

      By dbm7 · Posted

      If shift solenoid A is bad, that explains limp mode --- now you're in the same position as I mentioned previously, in that the next step is to confirm loom/wiring integrity from TCU to gearbox connector with a multimeter (the TCU cannot detect a broken wire, which can happen ..ie; rodent damage, loom rubbed through)...and then finally measure resistance (at the gearbox connector) for shift solenoid A ... ...once you confirm shift solenoid A is bad (open circuit, really low or greater than 40ohm resistance), then it's a job ; you have buy a complete solenoid set, get under the car and drop transmission oil pan, and remove valvebody assembly (the solenoids sit on top), replace solenoid set, and reassemble....it's not exactly a fun task, but readily doable.
    • GTSBoy
      Blue/grey smoke after idle

      By GTSBoy · Posted

      Is it oil smoke or fuel smoke? They smell different.
×
×
  • Create New...