Jump to content
SAU Community

Home Made Oil Cooler Setup

sriver killer

By sriver killer,
in Engines & Forced Induction

 Share

Recommended Posts

sriver killer Proficient

sriver killer

Posted
Posted

hey guys. i am halfway thru swapping turbos over. just wondering bout making a home made oil cooler setup. wud it work by taking the oil from oil sender. running it thru a small cooler and run the return into my turbo oil drain pipe. wud this work? safe idea?

Link to comment
https://www.sau.com.au/forums/topic/309246-home-made-oil-cooler-setup/
Share on other sites
Dale FZ1 Veteran

Dale FZ1

Posted
Posted

You do realise the stock 25DET has a liquid:liquid oil cooler installed from factory?

IMO no real value replacing it with a liquid:air unit unless for severe duty use (eg circuit work).

For street running and drags you generally won't load the oil with enough heat to warrant changing what the factory did.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Ozdavroz
      Best Skyline ever

      By Ozdavroz · Posted

      No-one in Aus/NZ would pay that much, because they remember when a turbo Skyline/Silvia was a cheap but awesome alternative to the mediocre shit sold here locally at the time. I'm sure over in USA there are enough trust fund kids who will have their R34 GTR, whatever the cost
    • Kinkstaah
      Import insurance in 2025

      By Kinkstaah · Posted

      I am stuck with enthusiast and very unhappy, even though Lumley, Shannons and Famous are all options, they all require a lock up garage, and my situation (basically a walled off compound from the street) is insufficient because the car is under a carport. I'm confident to resolve the situation I need to build a roller door with fascia in-front of my roller gate which is a solid opaque metal rolling gate. In any other universe moving the roller door 2 meters in-front of the garage door would still constitute the same amount of security but oh no. My insurance rates suck to the point of when I joined a market research for Enthusiast they were all surprised that I paid about 2-3x what other people were paying with Enthusiast when I asked them why their rates were so high. If I lie about having a garage, I save like $10 a month with enthusiast. (It's about $2600 p.a for 5000km of driving for a very unsustainable agreed value). Lumley has terrible reviews but @Duncan made me consider calling them when renew time came up - but their horrible reviews plus Christmas time made me... forget.
    • GTSBoy
      Starting again

      By GTSBoy · Posted

      Not far. If all you want to do is know that they will reciprocate and move oil around a tiny bit, then a metre or so is all you need. Half metre fore and aft is enough.
    • GTSBoy
      Starting again

      By GTSBoy · Posted

      That's the spirit!
    • Duncan
      Starting again

      By Duncan · Posted

      It's fine. Basically if it has seized (eg due to moisture/rust in the bores) it will either break free on the starter or it won't turn....then you'll know it is freed up If it turns and doesn't start (reasonably likely) you will need to troubleshoot but most likely issue is a seized injector from moisture; same if it starts but missfires. Anything else could have happened (eg mice nibbling electricals) but the only way to find out is to close your eyes and hit the key I'd also change the fuel filter again after a few minutes of running as it may catch a heap of crap on first start
×
×
  • Create New...