Jump to content
SAU Community

M35 Axis Owners In Vic?

iamhe77

By iamhe77,
in Four Door Family & Wagoneers

 Share

Recommended Posts

iamhe77 Grand Master

iamhe77

Posted
Posted (edited)

Hi guys,

I am finishing up converting the front of my NM35 RS to the PM35 Autech 350S but am having a little trouble with the grill.

Basically, getting the complete OEM Autech grill from Nissan Japan would cost me just over $1k (!!!!!!!).... needless to say, it ain't happening.

What I would like to test out is if the NM35 Axis grill will fit (same top clips and bonnet ornament, just not sure if there is a difference in width between the two grills).

So if there are any 2001-2003 M35 Axis owners in Melbourne on here that wouldn't mind me bringing my car to test the grill size, please let me know.

Edited by iamhe77
Link to comment
https://www.sau.com.au/forums/topic/309321-m35-axis-owners-in-vic/
Share on other sites
iamhe77 Grand Master

iamhe77

Posted
  • Author
Posted
I have a C34 grill.....should fit up OK.....same aren't they?

:(

Couldn't help yourself could you?

Custom stainless grill ftw, to go with the shiny wheels. :(

Dunno man.... with the way you go on about weight saving, wouldn't aluminium be better? :P

Ok, since I have couldn't be stuffed reading through all of the responses from all the Vic Axis owners, can I ask that ANY M35 Axis owner possibly lend a hand and measure the width of the top and bottom of the grill and also the width of the bonnet ornament?

boostedaxis Contributor

boostedaxis

Posted
Posted (edited)

I just replaced all my front end a couple of months ago. I will ring panel beater to see what is left over.

From memory grill was about $700 mark the lights were $2k each.

Some one else's insurance was paying so who cares about shopping around.

Yo what scotty said custom stainless grill FTW organize a group buy I already got the shiney wheels.

Edited by boostedaxis
iamhe77 Grand Master

iamhe77

Posted
  • Author
Posted

Yeah Mark, the prices for the grill assembly are just a tad high I think.

Could you possibly measure across the front of the top and bottom of your grill for me?

I can get an NM Axis grill with bonnet ornament for around $300, but I need to know if it will fit.

Vesza Contributor

Vesza

Posted
Posted
I just replaced all my front end a couple of months ago. I will ring panel beater to see what is left over.

From memory grill was about $700 mark the lights were $2k each.

Some one else's insurance was paying so who cares about shopping around.

Yo what scotty said custom stainless grill FTW organize a group buy I already got the shiney wheels.

Sorry... what? WTF!?! 2K EACH? For the lights? How is that even possible? Were they just skimming some money off the top cos it was an insurance job? I would've figured max 1K each.

iamhe77 Grand Master

iamhe77

Posted
  • Author
Posted
Sorry... what? WTF!?! 2K EACH? For the lights? How is that even possible? Were they just skimming some money off the top cos it was an insurance job? I would've figured max 1K each.

Sounds about right.

I call a couple of Nissan dealerships for a price on the series 2 Xenon headlights.... $2.5k each.

boostedaxis Contributor

boostedaxis

Posted
Posted

No skimming buddy. Two words for you JUST JAP. It was an $8000 repair 1 headlight 1 grill 1 bumper small repair and paint on the bonnet. What ever you do dont crash an axis.

I will measure up for you when the missus gets home this arvo.

iamhe77 Grand Master

iamhe77

Posted
  • Author
Posted
No skimming buddy. Two words for you JUST JAP. It was an $8000 repair 1 headlight 1 grill 1 bumper small repair and paint on the bonnet. What ever you do dont crash an axis.

I will measure up for you when the missus gets home this arvo.

Cool, thanks :ninja:

mxfly Veteran

mxfly

Posted
Posted
No skimming buddy. Two words for you JUST JAP. It was an $8000 repair 1 headlight 1 grill 1 bumper small repair and paint on the bonnet. What ever you do dont crash an axis.

I will measure up for you when the missus gets home this arvo.

that's exactly what happened to my car when some dick reversed into me. Thank God it's covered by Shannons. 1 headlight, 1 front bar, 1 reo bar, grill, minor repair on the bonnet. All up about $6000 but headlight is not new as there's none from Nissan Japan atm, so I bought Cam's 2nd hand set :ninja:

Btw Cam I got the lights, so thanks!

boostedaxis Contributor

boostedaxis

Posted
Posted

Ok done measurements for you.

First one is top to bottom vertically straight up the center bar = 175mm

Second measurement is across the top of the grill= 970mm

3rd measurement is the lower length that was hard to measure because of the curve. I measured it across the lower horizontal bar on the grill =850mm

scotty nm35 Grand Master

scotty nm35

Posted
Posted
Thanks for that Mark.

Seems that it will not fit as it is ~80mm wider than the Series 2 Axis grill.

Oh well... grill-less for a while longer I guess

Ive got a sheet of ally here with your name all over it, for when you change your mind. :)

You can drill all the holes tho, or laser cut Nismo into it? :devil:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      New fix for low tyre pressure from bmw

      By TurboTapin · Posted

      CTIS (Central Tire Inflation System) has existed since the 80's. I'm looking into buying a Hummer H1 and they generally included it. 
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Dose Pipe Sutututu
      Another little story of weird shit happening

      By Dose Pipe Sutututu · Posted

      Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
    • MBS206
      R34 gtt rb25det neo timing belt kit

      By MBS206 · Posted

      It's most likely the bolt/bush where the cover bolts back wore and allowed cover to move forward.
    • GTSBoy
      Another little story of weird shit happening

      By GTSBoy · Posted

      Still haven't put the injectors and R35 AFM in so we can tune the bloody thing for the HG highflow it got mid last year! I think I can forecast the upgrade path to a bigger twin scroll, external gate, Haltech, flex setup, Samsonas, dis dat, etc will be .... a while away!
×
×
  • Create New...