Jump to content
SAU Community

Recommended Posts

These pumps need 13.5V to operate properly.

Did he wire in a new voltage feed and relay for the new pump?

The std wiring has a resistor circuit that is switched in at idle...starving the pump of voltage and starving your engine of fuel.

lol at the AFM people...he says it runs fine whether cruising or boosting so why say its the afm when it appears to be metering the air nicely.

Why ? I had a WRX thar ran faster than a mad centipede and had an idle like a roller coaster --new AFM --problem fixed.

Surely dying at idle has a limited No of causes, just go through them one by one till it's fixed (if theres no fault code)

Lets start with ;

-------------------Fuel pump.

-------------------Fuel regulator.

-------------------Fuel filter.

-------------------Dirty injectors.

:others may care to copy and paste and add other things.

OR(My choice) --- Take it to a workshop that knows WTF they're doing get a fauly code read and they'll nail the frikin thing in 5 minutes flat , pay them for the diagnostic and then fix it yourself or if it's to tricky get them to do it.

I personaly would not be friken round with the fuel system if it wasn't an easy fix, -wrong call there and bang bang engine time.

I can't understand why you're putting up with a friken spanner cowboy who seems to be learning at your expense just an IMO.

Edited by BASHO

+1. Do what you can yourself, like swapping airflow meter, replacing fuel filter, bottle of injector cleaner, then go through the harder ones with a specialist.

Only problem with that is, the experts are usually booked months in advance.

hi there guys..

firstly, thank you so much for all of your contributions.. its really nice having a place to come and get some good advise when everybody around has run out of ideas... since the poor mechanic was starting to look a bit lost, i read some more faqs on here, listened to the advise, and spent the afternoon in his workshop.. i was going to do the whole earth wire mod, but after meatering the resistance between the pump and the body, i just didnt feel confident to screw around with it.. instead is dismantled and cleaned the afm and the aac valve..his scanner showed no faults until i cleaned the afm, at which point it said it was missing or faulty.. after checking the connections again, i gave the car a run, reset his scanner and then checked it again.. scanner showed up no faults so i've been driving it ever since... so far, fingers crossed and wood-a-knockin, the car seems to be running sweet and has no more stalling..

So again, thanks guys, and if any more probs arise, i'll re-post, but in the mean time hopefully we can call this one closed...

Cheers,

Damo

you should still do the fuel pump wiring mod u dont wanna starve the engine for fuel when your giving it stick. instead of just grounding the earth wire you should put a relay in and give the pump direct battery voltage.

note - just remembered r32s dont have the battery in the boot like r33s do they? this is a piece of piss mod in 33s for your car u might have to run a wire from ur engine bay.

you should still do the fuel pump wiring mod u dont wanna starve the engine for fuel when your giving it stick. instead of just grounding the earth wire you should put a relay in and give the pump direct battery voltage.

note - just remembered r32s dont have the battery in the boot like r33s do they? this is a piece of piss mod in 33s for your car u might have to run a wire from ur engine bay.

not sure if im too keen to put the pump on a relay like that, sould be a bit scared if the relay failed.. anyway, the bloody thing started stalling again today so i dont know.. i tore the afm out and pulled it apart.. i've resoldered the joints in it.. they looked a bit old, but will try the car again tomorrow to test it.. haveb been hunting around for another afm.. the closet i can find is one of a subaru.. the unit looks identical except the green sticker on it has the very last part of the code being different.. mine is a j60, and the subaru one is an r60.. too scared to try it though incase i blow something up :D

Good to see you had a crack at fixing it yourself, If the afm is playing up, that will probably fix it.

You probably found if you wiggle the plug it came good? That is the sign of a dry solder joint. Easy fix if you have a soldering iron, and saves buying a new afm.

Good to see you had a crack at fixing it yourself, If the afm is playing up, that will probably fix it.

You probably found if you wiggle the plug it came good? That is the sign of a dry solder joint. Easy fix if you have a soldering iron, and saves buying a new afm.

cheers mate.. starting to run out of ideas if it doesnt fix it though, bad ecu anyone? yikes.. it might just be my paranoira, but im starting to think it only plays up on bloody hot days if that give anyone a clue..

not sure if im too keen to put the pump on a relay like that, sould be a bit scared if the relay failed.. anyway, the bloody thing started stalling again today so i dont know.. i tore the afm out and pulled it apart.. i've resoldered the joints in it.. they looked a bit old, but will try the car again tomorrow to test it.. haveb been hunting around for another afm.. the closet i can find is one of a subaru.. the unit looks identical except the green sticker on it has the very last part of the code being different.. mine is a j60, and the subaru one is an r60.. too scared to try it though incase i blow something up :cool:

Sometimes cleaning the AFM is only a temporary solution I know this from when I had WRX, if the car ran OK after you cleaned the AFM then went crook again could still be the AFM do you know anyone you can borrow a good one from to check it out.

:cheers:

Never owned a WRX then or you would have heard plenty :cheers:

.. well i dont have any hope of finding another skyline afm round these parts so yesterday i opened the afm and resoldered all the joints.. so far, the car seems really good so i can only hope that its sorted it.. if anything, the car seems different is a good way so far..

.. oh, and my skyline has a k&n filter in it so oil contamination was a possibility.. think the contact cleaner and resolder should be close enough to call it reconditioned :cool:....

Edited by Damo Monster
lol at the AFM people...he says it runs fine whether cruising or boosting so why say its the afm when it appears to be metering the air nicely.

Laugh all you want. I still say AFM. Its intermittent.

.. well i dont have any hope of finding another skyline afm round these parts so yesterday i opened the afm and resoldered all the joints.. so far, the car seems really good so i can only hope that its sorted it.. if anything, the car seems different is a good way so far..

.. oh, and my skyline has a k&n filter in it so oil contamination was a possibility.. think the contact cleaner and resolder should be close enough to call it reconditioned :D ....

:blush: Congrats good to hear --IMO- flick the K&N filter if it's overoiled it'll do it again , farkit flick it anyway go Apexi dry or stock--just IMO though.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That ring thing is interesting how it's holding everything together 
    • Hey guys. I have a 400R on its way to Australia from Japan currently and have a few questions I’m hoping others may be able to help with.   Wondering if anyone here has had any luck getting the Sat nav unit to work in Australia!? Assuming the Stereo is as simple as a band expanded and tv won’t work?  Seeing as they’re based off a Q50 which is Aus delivered is there any way to link that system to the nav? Nav modules and head unit are different part numbers and appear slightly different at the rear with plug ins etc. can I put my xtrail sd card into the rv37 and will that convert the maps or update to Australian? Has anyone got any advice here?     also has anyone fitted the factory remote start and Security system once it’s landed in Australia? I put an enquirey to Nissan Japan in via a third party, and they suggested it needs a Nissan Japan dealers device to setup and couldn’t guarantee if one here could do it or not. They can supply and I can physically fit it but to setup I would need a dealers device. Any information here would be appreciated also. I’ve seen one here with it fitted already prior to leaving Japan at a dealer/inporter, so clearly passes compliance and works when fitted Japan and doesn’t need changing here.      also, does the tyre inflation sensors work here? Does anything change with them when the vehicle arrives? Where are they actually situated? I’ve read they have batteries and they need to changing at times and seems like resetting involves the nav system?    any help here would be appreciated and any other aust specific information to help would be great. Looking forward to see what the current generation skyline is like and eager to see how many of the gadgets can be utilised here.  Thanks in advance 
    • Do need to take it with a pinch of salt. One of the adapter failures, they clearly had setup issues with the flywheel.  One of the slipping ones I spoke to and it was pretty clear the throwout was riding, rather than fix, just swapped to a new clutch.    These clutches are being put in anything from 5k offroad 4x4 beaters, GR yaris, 500hp commodores to 1200hp barra monsters. Bound to be some issues in some of them when they are not a simple bolt in affair due to the changes in height.    There is a lot going on in this picture and unless I did the job myself no way to tell what really happened. 
    • I did this mod in 2019  You just have to modify the top bracket of the ABS/TC/Fuel Pump Control ECU so it sits more upright and closer to the back seat and run a good quality positive battery lead from the engine bay, the negative lead i just bolted down to the body in the boot.
    • Damn... Not the feedback I want to hear.
×
×
  • Create New...