Jump to content
SAU Community

Your interest in Club Motorsport  

112 members have voted

You do not have permission to vote in this poll, or see the poll results. Please sign in or register to vote in this poll.

Recommended Posts

Here at SauVic Motorsport we thought it would be a good idea to see what percentage of our members are actually into Motorsport. We are currently looking into running our first ever SAUVIC Track day at Winton at the end of October. If this event goes ahead it will likely replace the championship round at Winton schedueld for the 9th of October.

Just to give you an idea about this event, as this will be the last round of the SauVic Track Championship we are discussing the possibility of encorporating such things as a Cruise, Show and Shine and Saturday night festivities. At this stage we are estimating a ball park figure of around $140-$190 per entry for the Track Event.

Please note this event would be open for anyone to attend.

If we decide to go ahead with this event it would be a large financial outlay for the Club therfore it would be great if everyone could take the time to answer the above questions. With your help we hope to take SauVic motorsport to a new level.

Also, if the is anyone interested in being a part of the Motorsport Committee this year, please post in here or PM me your interest. Being part of the team means helping with such events as this Track day, Deca, Drag days and the Motorsport Championship. You do not need to be currently competing nor do you have to drive a skyline.

We would appreciate any ideas, opinions and suggestions - feel free to PM me if you do not wish to post in this thread.

Thanks Guys!

You cannot drift @ Winton through a club day.

It must be exclusively through VicDrif due to arrangements that are in place, and fair enough to given everything that's gone on (long story). :)

Just a suggestion:

"If you are not involved in Motorsport, why?"

Perhaps add an option for those that no longer have a vehicle up to the task of track days etc...That would be the option for me, but instead I just went with 'No time'

Just a suggestion:

"If you are not involved in Motorsport, why?"

Perhaps add an option for those that no longer have a vehicle up to the task of track days etc...That would be the option for me, but instead I just went with 'No time'

x2

You cannot drift @ Winton through a club day.

It must be exclusively through VicDrif due to arrangements that are in place, and fair enough to given everything that's gone on (long story). :devil:

Ah well if there is some back story with issues then that's fair enough. It's just a shame that Winton is the only track you can go drifting on in Vic.

If it's on a Sunday, I'll be there. I only get to the odd round at the moment because Saturdays are out for me so I'm competing in the Marque Club/NDSOC championship this year. I'd much prefer to be coming to SAU days though!

i would be interested, but that time of the year is pretty close to exams so it really depends more on my uni timetable.

if it does go ahead then i will try to get some guys from aus300zx to come too.

I want to get into more motorsport, having done a few DECAs already, but finances mean I currently don't have a car suitable. Have one in progress, but it's unlikely to be ready this year.

How about... I would love to but I am afraid of stacking my only decent car with no track insurance in 1 second and have to work 2 years and survive on instant noodles and pushbiking to work to replace it?

Well, I guess the "too expensive" box will have to do.

yep sign up me, where do i pay.

imo the day should be run as an open practice not a champ round. this way you will get more people coming to the day

as their mates and gf can run as a passenger in the car all day.

an sau event should be less msca/alfa (while great days) type days and more tampered motorsport type days.

photo of all the cars on the grid etc etc

i really want to get into it, id love to do some track days and i was going to enter DECA until i had those few problems that are fixed.but the problem is my car is auto so wouldnt work to well but im getting a new car soon. also the other problem is im not very confident i really need to work on that part as well.

I've been trying to do more. Managed all but one DECA last year (through the trans in my daily going kaput), and damaged the car at two successive DECA's. The one track round I managed I came off on the first lap of the timed sessions, so that was the end of my day. Doesn't discourage me though haha :cheers: I snuck a couple of non-SAU track days in last year. Hoping to enter the rest of the Winton Sprints for the year (non-SAU.)

So yeah, I'd love to try and get out and do more. It's only been car troubles holding me back.

Yeah I'd definately be interested. Been looking at going to a Winton fun day for a while.

+1 For the I have a car but it isn't ready option.

I won't be entering the 33 onto a circuit until I have an Oil Cooler and some Brake mods. So could be a year. Could be 2. But it will happen. Until then 1/4 mile only as its a bit less taxing on the car. Personally time attack would be ideal. Do the lap and get the car off to cool down to save on wear and tear.

Yeh, definitely might need tick boxes instead of radio boxes up there, Im the same as Basti, time, money..etc... but would be interested, want to start getting into it once ive put my new turbo in.

2 other things affecting it for me: my lack of socializing with sau outside of the net makes me feel a little nervous, not that I will be judged or abused or anything, just I have close to 0 mates that are interested in cars, so no one to come with me. 2. I have been to winton once before, but barely knew what I was doing, what happens if your a noob on the track and everyone has to slow down as you go around corners? do u get hailed with stones as they flog past or whats the go?

WYTSKY, generally there are driver training groups, and I highly recommend you do a couple of those before going out and hitting the circuit alone.

As for me, well, won't be until a few years away before I get the balls to go out on the track again >_< Plus I need a half decent car.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, I've been a little busy on this car. I replaced the bonnet struts which is always satisfying but very confusing that nobody else on the planet seems to do this. Its just my routine first thing I do on any car I buy. The boot struts for both the tailgate and the separately opening glass window was a bastard. And, I found a fair bit of rust in the strut cavity. I filled it with rust converter and cleaned up as much of the dirt as I could. There was so much dirt. One piece of the trim was barely hanging on and so I've left it off. I'll try to get a replacement. You can see how disgusting and dirty it all was in this thread; I had to remove the little clips that hold the struts on the ball. The ones I took off had no clips and it was impossible to get them on with them in place. Fingers crossed they stay put. So, I turned my attention to the headlights, they were in a bad way and likely would stop rego. I took the headlights out and found the adjusters were all just loose. So, I fixed those and unclipped the lenses to clean them up. Couldn't believe how easy it was to take all this apart compared to the E90.   I also cleaned up the stockies which was awesome, these are super cool with lug nut covers. They're in good nic but the tyres are shot. I was going to use these for rego but in the end got a fresh pair of rubber for the 17's on the front of the car instead. The front bar of this car is from a late(r) model one. I don't think it's quite LCI but who knows. I'll need to find out. Anyway, the bar was missing the fog lights and the wiring and plugs were for the original ones so I got new plugs and some cheap fogs. I wasn't sure if missing original equipment would hamper my blue slip attempts. Had a couple of these little fellas helping out. But not Ben who got stuck behind the pool heater .... How embarressment.  I ordered new speed sensors for all corners because I knew one was out. I just got cheapies and will replace them with Bosch items when I can find Bosch items. Again, this was just for rego. Alas, it seems the blue speed sensors are not the same as the grey ones. Back they went and replacements ordered. In the end, with my new scan tool, it was just rear left that was shot. Replaced it and cleared the codes. All good now. Lastly, my aux (thermo) fan is being a bit odd. Its powering up at strange times and NOT powering up when I think it should (100C). While this can be caused by a few things, the most likely (for me) is the ambient temp sensor. Given mine reads -40.0C regardless of the temp, I figured it would be good to replace it. In the end, the sensor wiring was abysmal with (terrible) attempts made by somebody to fix it.   I fixed this all up but the sensor is only attached using pins into the wires. The plug is not there. Despite trying and trying to connect it securely it wouldn't work so a replacement sensor and plug is on the way. Oh, I also ordered a replacement piece of trim for the part missing here at the bottom. Ordered from Latvia for $70 delivered. I took a bit of a leap of faith because I didn't have the exact part number and, as usual, there were eleventy billion pieces of trim that looked to fit. Nailed it. Well, its not totally perfect but I think its more a 28 y/o car problem than a trim problem. And, as of today ..... I have bought the workshop manuals 2nd hand off a guy in tassie. 1000+ pages of E39 goodness, hopefully it helps me with the fan. I also have a new temp switch on the way incase its the problem. Stoked.
    • I don't even know that you want an M2 Competition as a track car. My rule for a track car is only risk as much as you're willing to completely total out. Clean stock C5 Z06 Corvettes out here are cheap. Buying someone else's already ruined track car is even cheaper. Maybe I'm just not that good a driver but even a Fiesta ST on the Nordschleife felt like as much car as I could realistically handle.
    • I've already gone over the cam. A new one is going in. An old one is coming out! The new one is smaller, with less overlap. It has way more lift, but it will be more mild mannered (hopefully, probably very minorly) I'm also measuring for two more mufflers, with the goal of having four mufflers in my car. But that probably will be done by an exhaust shop in a drive in, measure, buy parts, install parts later kind of deal.
    • Mine is not even a GTR and I've been resisting the urge to make it a power monster for the last 25 years. And as a consequence, I have driven it to work nearly every day across that span of time.
    • Since the motor is out, I suggest pop in a nice dirty LS chop cam. MOAR of this please:  
×
×
  • Create New...