Jump to content
SAU Community

Recommended Posts

Not the informeter, there is no input for it. I do all my logging with the Emanage Ultimate, wideband included, then I send the log to my tuner who rings me back and tells me if I need a re-tune after each mod. lol.

According to this link you spice the wideband in the pink wire on the infometer.

  • Replies 234
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Very nice find, I haven't seen that before. Might be a better gauge than the innovative one I use...

Well I've got one on order and it would be a bonus if this works (no reason to believe it doesn't). Pink must be an analogue input but I am not sure it's left free if you run the sensor adaptor also. Though having looked thsi picture of the wiring set-up it looks like the pink is still available even with the three external sensors = possible win.

16401702_1.jpg

Yeh, I have the external sensors all plugged in, which means I cant run the serial connection to the Emanage. I cant remember offhand if the pink wire was free.

I wonder if there are any other sensors I can plug in...

i wish i could get it to dim at night time. or when my headlights are on.

anyone know that one?

Mine doesn't dim either, so I just reduced the backlight to around 30%. Still fine in the day, and much better at night.

Hey quick question to all. How hot water temp is to hot. Hit 99 today in traffic and got little worried as I set alarm at 97. Air intake was at 76 :S

Mine does this also, in fact; those are the exact same peak numbers as on my Informeter. It's not nice to look at, but before you had the Informeter it was exactly the same; you just didn't know it.:whistling:

You have to understand this isn't an HQ holden, these engines are designed to run in the mid 80's minimum.

Modern engines run tight tolerances and the running temperatures reflect that, higher engine running temperatures also promote better emissions (notwithstanding the rich/retard things cars do when the weather gets really hot).

My last Honda road bike (CBR 929RR) had a digital temp gauge; running temp was 89 deg, would routinely run out to 106 deg, fan would come on drop it to 98 deg. I once rode it on a 47 deg day with a pillion, with the temp gauge sitting on 102 deg for 5 hours. I did 75000km on this bike and when I sold it it went EXACTLY the same as the day I bought it. Most Honda road cars, the optimum running temp is 90 -95 deg, it's just a number.

The cooling system is under pressure (10- 15psi is normal), water does not boil at 100 deg if it is pressurised. (I think the rule of thumb is an extra degree for every psi of pressure)

As Cephas says; the thing to worry about, is if the car doesn't cool down once you're moving (more than 70km/h). This means the cooling system, or the volume of water in the system is inadequate for the purpose.

Of course, any amount of heat you can remove from the syatem is a good thing (i.e external oil or trans cooler ducted AWAY from the radiator) just gives more headroom for the system to operate in extreme conditions.

Edited by Daleo

mines hit 107 before in hot weather with the AC on. this was stop start traffic

lately its been around 90-99 in stop start. once im moving at 60km it drops back to mid 80s. im not so worried anymore now other people are having similar numbers. i also have a nismo thermostat which i think was a stock one in a nismo box

Yeah. I average near 90 on hotter days. Hit 99 and got worried so took back roads where I wash sitting still and dropped to 94-95. Air temp was high 60's still though.

Need standard airbox! Any body know where I can get one without selling my liver?

Yeah. I average near 90 on hotter days. Hit 99 and got worried so took back roads where I wash sitting still and dropped to 94-95. Air temp was high 60's still though.

Need standard airbox! Any body know where I can get one without selling my liver?

Got to 101 in traffic....intake temp got up to 79!!!!

Talk to zei20l.....pretty sure he has a spare standard airbox!

Ok I thought it was just me with high intake temps. As when I opened the bonnet it dropped 5 degrees within seconds. Also driving with bonnet open shows marked improvement with my crappy pod. But cant drive with the bonnet open around streets.

Can anyone with a leaf screen AND an informeter comment on the fuel consumption readouts from the informeter? Mine seem to be so far wrong its comical (Im assuming the leaf screen is accurate - Ive never heard reports to the contrary)

Well it depends on how often you reset your informeter. My average is quite accurate with leaf but trip is a little off. Haven't really tested it though. I find the actual leave compared to the currant usage on inform to be the same.

But my throttle seems never to go below 10% lol dunno why

Can anyone with a leaf screen AND an informeter comment on the fuel consumption readouts from the informeter? Mine seem to be so far wrong its comical (Im assuming the leaf screen is accurate - Ive never heard reports to the contrary)

lol I purposly didnt set these up, and the leaf screen i shut off.

250k per FULL tank is not something you wanna see lmao

Edited by AaronNM35

lol... that's 2 days to work and back for me!

I dunno how you put up with it mate

well everytime i try to get a tune onto it, i either get exited and find something else i wanna do first.

or my turbo blows lol

Because its stuck in my shed with no turbo. Cheap to run if you dont drive it. lol.

^^ and that.

Scott wish shayne for me!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Duh... to answer my own silly question, it's actually described in the FSM... ...400 pages away at the end of the manual, for RB25DE/DET signal descriptions, it cites the TPSwitch signal action, is dependent on the TPSensor value ~ this tends to infer the builtin POT voltage signal is the primary, and the switches are fallback/secondary should the POT fail/TPSensor signal lost (and switch alone with no TPSensor signal allows for base idle speed setting).... makes sense... they (TPS units) used to fail/wear the POT with time, they're not exactly built to last ~ having the switch as a redundancy gets around this...(or, it's less likely both signals would be lost as they're on different power rails)... and of course wrt RB26DETT, you have to electrically disconnect the IACV solenoid from the harness, to defeat idle air control...  
    • Dose is unaware just how much fun 145-150kw would be in a 2.5L NC MX5. It would be one of the most fun things to drive to ever grace SAU.
    • Same thought crossed my mind ~ depends on how one connotes 'stalling'...ie; gets a rough/stumbling idle as it get warm until it stalls... or... idles ok and simply falls-over when it gets to temp... ...you can test the whole circuit with a couple of resistors ...unplug coolant temp sensor, bridge terminals with a 2K7 resistor (ECU will do cold start), or with engine warm bridge with a 330R resistor (ECU will consider engine to be at normal operating temp)...it's a quick way to check wiring integrity/ECU response when you don't have a multimeter handy ...
    • They also make them with the motor mounted on the side 
    • Just be warned that that turbo will not be a direct re-fit to the car. The exhaust housing is, of course, in the same place. It has to be - it's bolted to the exhaust manifold. So the dump will fit up. But the centre housing is not as long, so the comp housing will move backwards. This will affect both the turbo inlet and the outlet. There is fab work that needs to be done. Yes. it has one, it should have one. Paper gasket.
×
×
  • Create New...