Jump to content
SAU Community

Recommended Posts

justing getting rid of a few parts i wont need anymore

1) Brown Davies Roll cage to suit a R34 2 door, powered coated white, completely welded together as one piece, to fit to the car have to remove both seats and the centre console and slips right in lol, this cage is cams approved and vic roads

$1000

2) HKS 2835 Pro S, i made 292kw at 1.2 bar turbo has done well under 5000kms comes with water and oil lines, snail type hks dump pump, its a T3 flange still fitted to the car

$2200 neg

3) Nismo 480cc injectors to suit a RB25 NEO, 4 hole spray pattern once again i made 292kw with the hks turbo, comes with the o-rings and injectors,done under 5000km

$650

4) ARC reverse flow intercooler, used this intercooler on my car for approx 12 months, looks factory under the bonnet no leaks or not what never had a issue with it, suits a R34 RB25DET comes with all piping, silicone joiners and clamps

$ 600

5) Power FC to suit a R34 NEO comes with the hand controller, never had anu issues with it still fitted to the car tuned with 480cc injectors, 2835, Z32 etc etc

$1200

PICS WILL BE UP LATER TODAY!!!!!!!!

PLEASE RING ME ON 0401035221

you can PM me but just ring me instead

all parts located in the south east of melbourne

thanks tom 0401035221

  • 1 month later...
justing getting rid of a few parts i wont need anymore

1) Brown Davies Roll cage to suit a R34 2 door, powered coated white, completely welded together as one piece, to fit to the car have to remove both seats and the centre console and slips right in lol, this cage is cams approved and vic roads

$1000

2) HKS 2835 Pro S, i made 292kw at 1.2 bar turbo has done well under 5000kms comes with water and oil lines, snail type hks dump pump, its a T3 flange still fitted to the car

$2200 neg

3) Nismo 480cc injectors to suit a RB25 NEO, 4 hole spray pattern once again i made 292kw with the hks turbo, comes with the o-rings and injectors,done under 5000km

$650

4) ARC reverse flow intercooler, used this intercooler on my car for approx 12 months, looks factory under the bonnet no leaks or not what never had a issue with it, suits a R34 RB25DET comes with all piping, silicone joiners and clamps

$ 600

5) Power FC to suit a R34 NEO comes with the hand controller, never had anu issues with it still fitted to the car tuned with 480cc injectors, 2835, Z32 etc etc

$1200

PICS WILL BE UP LATER TODAY!!!!!!!!

PLEASE RING ME ON 0401035221

you can PM me but just ring me instead

all parts located in the south east of melbourne

thanks tom 0401035221

Hi, I am Alex from Mordialloc. Is it a half cage? 0433878905

cheers

HKS 2835 PRO S turbo kit, dump pipe oil and water lines etc

$2200

post-47108-1272796587_thumb.jpg

post-47108-1272796636_thumb.jpg

genuine East bear R34 GTR front bar to fit a GT-T or GT requires gtr bonnet which also is for sale

$500 NEG ONO!

post-47108-1272796757_thumb.jpg

$150

3" cat back exhaust came off a r33 has been made to be tucked up close as possible to the body for ground clearance

post-47108-1272796853_thumb.jpg

custom intercooler pipes with a Z32 moulded into the pipe work, gives the factory look had it on my car with the 28/35 pro and arc intercooler

$250

post-47108-1272797288_thumb.jpg

BMC panel filter suits all RB25 RB20 DE and DET air boxes good condition lucky to have 1 hours dyno time on it, held power back using a air box so went with a pod filter

$50

post-47108-1272797342_thumb.jpg

ARC intercooler all piping needed etc

$600

post-47108-1272797446_thumb.jpg

R34 GTR MFD, all wiring looms needed and plugs, comes with top cover also

$1000

post-47108-1272797542_thumb.jpg

EDIT genuine East bear R34 GTR front bar to fit a GT-T or GT requires gtr bonnet which also is for sale

$500 NEG ONO!

EDIT

number plates and cat not included!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So you're now accepting offers of 10% more than the cost of the turbo kit fitted?
    • No......not yet Minister for War and Finances has stated that the Commodore has to go first Not that I am going to modify the NC any more than what it is already modified now.....
    • Thanks again, really helpful chap from alpha omega wanted to speak to me, little concerned if this is meant to he aero alloy/ airospace quality and car sitting on drive has caused this.  Airplane are subject to much more changing temp and conditions than road salts! My caliper, many other components much older have surface rust but never eating part of the metal   Had I not seen it , could have been a disaster! specifically on rear part of bracket coming off like biscuit will update on what they say, helpful people so far
    • January or Feb is it booked in for turbo fitment?
    • The MX5 has had some annoying rattles in both front doors over bumps So I installed fancy pants door bushings, which stopped all of the rattles with the windows up, but........with the windows down there was still rattles, so after some googling,  and a chat with MX5 Mania, I got some new door to glass weather seals, all the rattles, windows up, or down, are gone now Shout out to MX5 Mania, the weather seals were on sale, and when I head to Dural to pick the up they even fitted them for me for free I did see a "really" nice Blue NA sitting out front   and this Black NC PRHT that looked like it has sat in the sun for its whole life and never had a wash, the clear coat was non-existent, an it looked horrible, really horrible, but, it had a nice turbo kit with over 200kw, the thing went like a cut snake, bagging the rears through the gears and dosing like a champ 😍 But, as I've always stated, I am keeping my NC na, I'm happy with the current power the car makes In other news: MX5 Mania do a drive in drive out turbo kit, the only minor additional part recommended for boosting my car, as it sits now, is a oil cooler, and that bonnet vents are definitely required for track use Aftermarket version look a bit to "racecar" spec I wonder how Focus RS bonnet vents would look?????
×
×
  • Create New...