Jump to content
SAU Community

Ati Harmonic Balancer

huddy

By huddy,
in Engines & Forced Induction

 Share

Recommended Posts

huddy Veteran

huddy

Posted
Posted

Ok, my engine build has commenced I'll update another thread shortly - I just need to know what what spec ATI harmonic balancer and part number I should use.

engine will be approx 350rwkw - RB 26 / 30 in a cefiro.

should I go for the 600HP or 1000HP option?

as for pulleys they should be similar to R32 - but what do i need to look for to confirm belts? (should I check grooves on alternator / power steering pulleys?)

who sells them at a reasonable price - haven't seen much under $900.00

also done some reading and I think some ppl have ordered from Summit racing - anyone had any experience with them? seems to be a bit cheaper than local ones... (maybe...)

http://www.summitracing.com/search/brand/A...AN/?Ns=Rank|Asc

thanks

-Matt

Link to comment
https://www.sau.com.au/forums/topic/310001-ati-harmonic-balancer/
Share on other sites
R32 TT Mentor

R32 TT

Posted
Posted
Ok, my engine build has commenced I'll update another thread shortly - I just need to know what what spec ATI harmonic balancer and part number I should use.

engine will be approx 350rwkw - RB 26 / 30 in a cefiro.

should I go for the 600HP or 1000HP option?

as for pulleys they should be similar to R32 - but what do i need to look for to confirm belts? (should I check grooves on alternator / power steering pulleys?)

who sells them at a reasonable price - haven't seen much under $900.00

also done some reading and I think some ppl have ordered from Summit racing - anyone had any experience with them? seems to be a bit cheaper than local ones... (maybe...)

http://www.summitracing.com/search/brand/A...AN/?Ns=Rank|Asc

thanks

-Matt

Hey there Matt, I ordered one from Summit only about 2 weeks ago, got here in 5 days using the US postal service option (cheapest option) and all up with freight etc I landed it on my doorstep for $730AUD. I got the 1000hp unit. Not fitted yet, I am running similar HP to you.

Summit were really good. They had 6 in stock at the time.

R32 TT Mentor

R32 TT

Posted
Posted (edited)

I went with this one: ATI-917752

http://www.summitracing.com/parts/ATI-917752/

Notice its a bit confusing since in their description it says its for 1995-1998... but I think this is just a typo. If you look up that part no on the ATI website you'll see it the 7" 1000hp one for R32. (at least I hope so!!)

http://www.atiracing.com/products/dampers/...s/damnissan.htm

Edited by R32 TT
bubba Grand Master

bubba

Posted
Posted (edited)

I got 3x 1000hp ATI RB26 balancers from Summit, and a bunch of gauges, easy to deal with but shipping can be harsh :ninja: On the up side, they now send me a catalogue every couple of months :)

Pretty sure Matt has the numbers correct but if you want me to check my box shoot me a PM.

Just make sure you keep your order below AU$1000 (including shipping) or you WILL get stung with import duties. It cost me nearly $400 to get the 3x balancers and 4x gauges out of customs when they arrived :cool: and a little birdie told me that ALL Summit Racing boxes get stopped.

Edited by bubba
rob82 Mentor

rob82

Posted
Posted

I've got to ask why are people going to the ATI balancer over the std balancer? I cant find any information on ati's website about its benefit other than how pretty they look. Whats the difference between the 600hp and the 1000hp other than the label on the box?

Swiper the Fox Grand Master

Swiper the Fox

Posted
Posted (edited)
I've got to ask why are people going to the ATI balancer over the std balancer? I cant find any information on ati's website about its benefit other than how pretty they look. Whats the difference between the 600hp and the 1000hp other than the label on the box?

To pull as much harmonic vibration as possible. The 1000hp has a larger diameter so will be more effective but needs to be rebuilt fairly often...the 600hp models are pretty much set for the life of the engine.

Edited by Swiper the Fox
rob82 Mentor

rob82

Posted
Posted
To pull as much harmonic vibration as possible. The 1000hp has a larger diameter and needs to be rebuilt fairly often...the 600hp models are pretty much set for the life of the engine.

And is there any data to suggest the secondary moments are being reduced when compared to std balancers?

R32 TT Mentor

R32 TT

Posted
Posted
I've got to ask why are people going to the ATI balancer over the std balancer? I cant find any information on ati's website about its benefit other than how pretty they look. Whats the difference between the 600hp and the 1000hp other than the label on the box?

Fair question Rob.

It was explained to me a couple of years back that the standard RB26 balancer was probably up to the task, especially since I would most likely not rev the RB30 as much as the RB26.. that made sense to me. Then someone scared me by saying something like "What..? You're not putting a decent balancer on??" :thumbsup: So yes, without any 'real' scientific evidence I went ahead and bought one for peace of mind. Its a bit like the "broken N1 Pump" story... I have not broken mine, but now while the motor is out, I am changing to a Tomei purely not to take a chance.

Those facts and the fact that some of the big horsepower guys seemed to think they were worth it. In fact I noted in several places people commenting that the ATI were perhaps better than the Ross Metal Jacket.. so I figured if people are picking some sort of diff between two 'high performance' units, then surely both of these are still better than the std item (else why would these guys bother)... Apparently Mark Berry and Russ were throwing belts using the Ross and all probs went away when they fitted an ATI - again - forum info only - so I am not sure of this or not...

Last of all, I noted that Balancers can be 'rebuilt' which infers they 'wear out' or become less effective over time.. my RB26 balancer is nearly 20 years old... so I figured time for a new one. Having said that I do know plenty of guys running some good GTR's with the std balancer so.....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      I for one welcome Nissda.

      By Duncan · Posted

      Surely the merged entity will be called "Honda" given the relative company values. I've got to be honest, I don't understand how merging 2 companies that missed EVs (despite Nissan making the first mass produced one) will solve their problems
    • Murray_Calavera
      How "plug and play" is the Haltech Pro for R33 GTST

      By Murray_Calavera · Posted

      If you haven't bought the ECU yet, I would strongly consider buying a modern ECU. Yes it is very easy to setup and tune, however it is lacking many of the features of a modern ECU. The pro plug in is something like 10 or 12 years old now? Can't remember exactly but it is very dated now. In that time the Elite was released and now we have the Nexus platform.  I would strongly consider not buying the ECU that is 3 generations old now (especially as it isn't a cheap ECU!). 
    • r32-25t
      I for one welcome Nissda.

      By r32-25t · Posted

      Im happy for it as long as it means reanult gets the boot 
    • Murray_Calavera
      Steps to DIY sanding car back ready for respray....

      By Murray_Calavera · Posted

      Sorry I should have been more clear with the previous post.  The block is a sanding block - picture something like this https://motorguard.com/product/motor-guard-bgr161-bgr16-1-rigid-psa-sanding-block-2-5-8-x-16/ The guide coat is the paint It's two separate things I was talking about, there is no "block guide coat". 
    • Murray_Calavera
      Steps to DIY sanding car back ready for respray....

      By Murray_Calavera · Posted

      Maybe more accurately, you aren't just dulling the existing paint, you are giving the new paint something to 'grab on to'. By sanding the existing paint, you're creating a bunch of pores for the new paint to hook on to.  You can lay new paint over existing paint without sanding it, might last a year or two then sad times. The paint will peal/flake off in huge chunks. By sanding it, the new paint is able to hang onto it and won't flake off.  Depends on the primer you are using. When you buy your paint, as the paint supplier what grit of sand paper to use before you lay down the primer.  Use whatever you like as a guide coat. Pick a colour that really stands out in contrast to the paint. So say your sanding/painting a currently white car, using a black guide coat would work well. You very lightly lay the black guide coat down, then as you sand the car with the large block, all the high spots and low spots will stand out as the black paint is sanded off (or isn't sanded off).  When you buy your paint, hit up your supplier for recommendations for what paint to use for a guide coat if you're unsure what would work well with your setup. 
×
×
  • Create New...