Will This Fit My R34?

[noely1]

will this fit my N/A r34 sedan??

http://cgi.ebay.com.au/WALBRO-FUEL-PUMP-Ni...=item23059f8795

also would 550cc injectors work well??

will the injectors that are labeled as "turbo" ones fit my n/a??

i know sfa about this sort of this so any info would be great!!!

cheers

[zebra]

why do you want 550cc injectors for your NA? do you have an aftermarket ECU to run them?

and that wlabro pump looks too cheap to be genuine

[Marcus89]

injectors and fuel pump have you got a fair bit of work on your N/A?

[PSI-FED]

why do you want 550cc injectors for your NA? do you have an aftermarket ECU to run them?

and that wlabro pump looks too cheap to be genuine

lol took the words right out of my mouth.

Edited February 28, 2010 by PSI-FED

[noely1]

nah i dont i was going to get an aftermarket ecu aswell.. in the process of looking at options for them aswell...

and ohh okay how much would a walbro pump usually go for ?

[mad082]

may i ask why you want to upgrade them? is the old pump failing? if not then don't bother. neither a bigger fuel pump nor injectors will give you a power increase. unless you have a hell of a lot of work done (such as having a turbo fitted) then there is no need as you won't even be close to maxing out the stock ones.

[N-DAWG]

Does seem a bit cheap for a Walbro. A Walbro GSS342 should be a direct replacement (done it on my R34 GT for the turbo conversion) but as mentioned already, why do you need bigger pump and injectors?

GTT Injectors are a straight swap on an RB25DE NEO. iirc they are around 370cc? which is enough for me to run a turbo at around 10-12PSI on 10:1 CR. Unless your looking to rebuild your engine, put on a big turbo, one that would even require ditching the factory AFM... you're not going to need those size injectors and even then a Walbro GSS342 is good for 500HP (or is it 550)? nuff said though, spend the money elsewhere unless this is part of a major upgrade

[noely1]

well im thinking of getting an APEXI fc +hand controller for my car... thats the reasoning behind it..

also anyone know who/where i can source one of these apparently they have been discontinued for the ER34's ?

[noely1]

also if i got the apexi fc would i have troubles as my car has been converted from an auto - manual and am still using the stock r34 AUTO ecu???

[N-DAWG]

Apexi Power FC should be fine as the car is manual and no longer needs the auto shift logic, and your replacing the ECU, not running a piggy back.

What are your long-term plans with the car? You would at least want to be working on the internals, upgraded camshafts, port polish, raise compression etc... to really take advantage of 550CC Injectors, bigger pump and a PowerFC... The cost of the PowerFC + Tuning = not worth it unless your at least fitting a snail

[noely1]

i'll be turbo'ing the car as soon as i get off my p plates.. which wont be for another 2 yrs but i figure while i have money imight aswell start doing things to the car to get it turbo ready so to speak..

[N-DAWG]

In that case buy your parts, but wait till your ready for it all to be put together before you start playing around with ECU's injectors and pumps. Only because it's unnecessary costs in labour and tuning, only to be retuned on the turbo conversion.

So to answer your question, a Walbro GSS342 is a direct replacement fuel pump, and R34 GTT Injectors will be a direct replacement, and will be plenty unless you want to go all out rebuilding your engine for higher horse power. Unless your able to get R34 550CC injectors at a really good price that's hard to pass up, then go for it, otherwise just stick with good 2nd hand GTT Injectors and you should be fine

[noely1]

ok cool cheers for the info Nathan

[dori34]

i'll have neo stock injectors for sale towards 2nd half of this year if you are interested then lol

[noely1]

how much would u be looking for them?

[Sheng]

i have 5 GTT injectors sitting here, you can have it for 50 buck lol