Jump to content
SAU Community

Recommended Posts

i have a friend that lives in maroochydore, qld and he's yellow 1993' rb25det was stolen a while ago, not sure if asking on here is any help but its worth a try, is there anything i can do to possibly track down the car? it was a professional job a few cars got done in his street the same night.

Link to comment
https://www.sau.com.au/forums/topic/310126-how-to-find-a-stolen-car/
Share on other sites

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

Three reasons to steal a car.

# Joy ride

# Sell for parts

# Re-birth

Only 1 of those usually results in getting the car back. Guess which one. The answer is no, you can't do sh*t and odds are if it was a 'professional job' then he won't be seeing his car ever again.

+1 for insurance so long as it's 'Agreed Value' Comprehensive & all mods and updated rims noted.

Insurance companies tend to screw the policy holder if he/she only has 'Market Value'

Edited by CARSICK

lol musta been a kid or something, after working around cars for a while i realize they're really easy to steal.Not that i'd steal a car as i've always had my own so theres no need, i had a sunfire with PASSLOCK and installed an ignition from an older car that didnt have it but theres a way to bypass it with a resistor, well i had to use a multimeter first but when i put that on it did something to it and bypassed it lol.The theft light just flashed all the time after that.

gone in 60 seconds, best movie in the world :P, my mate is pretty aware that theres a very little chance of getting it back, i told him id just ask and see what other people say incase there was like a special investigator or something we could go to, but if it's been used for parts or something like that it could be on 50 different r33's around the world lol. im pretty sure the most professional person could not steal my car right now, they would have a fulty immobiliser, most of the turbo side pulled appart, electrical wires unplugged everywhere under the hood, it has no oil or coolant & on ramps with the front spoiler removed, ha.

to have more of a chance of someone not stealing ya car try,

Parking next to kerb and turning the wheels fullock into the kerb till the steering lock pops.

If you park your car out the front of your house try park it under a street light

If you park you car out side your house and its a daily, work out how much fuel u need to get to work each day, say it be 15L, Put 15-20L of fuel in each morning, instead of filling up at the start of the week, that why the dicks will

have to get fuel once they take off in ya car, or they will run out near by your house.

Always have a kill switch, even no they are stupid easy to get past, have a ignition kill switch and a fuel pump kill switch put em in random spots, anything to slow them down abit,

Alarm well thats the same as the switch its goin to slow em down....

Steering lock, they easy to, but i still like to put one on.

Other people ive seen with those biggass yellow Wheel locks that rap around your rear wheel, a bitch to put on everynite, but hey... they work.

Flame me as much as u want, i still think doin all these things would make it harder for somone to steel your car, i dont care what anyone says.

it took me and my dad 45 mins a really low car reailer & allot of sweat & tears to get my lowered skyline onto a car trainer not to mention i cracked the center muffler doing it, it also made a hell of a noise with chains and what not, im sure id hear it happen.

think tow truck.

meh, club lock, alarm, immobiliser, even take the coil pack loom off or the coilpacks if you're that paranoid, if they still take it they are likely pros and have been sussing it out for a while.

I've heard of people having D shackles set into concrete floors so that chains can be put through the wheels (have seen pics of this done in a garage which housed a VL Group A lol).

think tow truck.

meh, club lock, alarm, immobiliser, even take the coil pack loom off or the coilpacks if you're that paranoid, if they still take it they are likely pros and have been sussing it out for a while.

I've heard of people having D shackles set into concrete floors so that chains can be put through the wheels (have seen pics of this done in a garage which housed a VL Group A lol).

Ha ha ha... I like that.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ha! well, there's your problem!  Guess the last person in there didn't have great attention to detail....
    • It seems like you guys want to behave like rabid dogs, rather than gentlemen... Knowing one has jumped in on a fellow comrades near done deal, and sniped it at the last second, how can one sleep at night?
    • My wifes says we have a spare set.
    • Good news!!! Changed the O ring today and I’ve got the “pssshhhh” back when I open the fuel cap 😂🙌🏼🙌🏼 It was 100% the O ring because that bloody thing was inside the fuel tank 😂😂😂😂😂 Fitting new fuel pump was a pain as always since the DW is a bit longer than stock. But she’s running!!! ❤️
    • PWM quite literally just chops the ful 12V voltage on and off at whatever duty cycle you're running it at. If you're running it 100%, then it is on full voltage all the time, same as if there was no PWM. If you run it at 50% duty cycle, it is only seeing the full 12V half of the time. This is broadly equivalent to running it at 6V. But the crucial difference is that motors (and a lot of other loads) don't like being powered at low volts. They will either fail to start rotating, or draw a shit ton of current, or other undesirable things. But if you give them the full volt, and then a short period of no volts, and then some more full volts, then the times when they are seeing power they are seeing all the voltage, and they are happy. But you get the performance out of them as if they were only seeing that fraction of the full voltage. It is not really easy to answer your question about what flow you will get out of it at 50% duty cycle. I can tell you that it is not as simple as you think. For a start, that 460 L/h pump is not going to flow 460 when you're on boost. When you're on boost you will be somewhere down the sloping part of that red line. If you have 15 psi of boost, then the pump can only deliver about 95 gal/h, which is <380L/h. So your simple 50% on 460 = 230 wasn't going to work anyway. But also, it won't deliver 50% of 380 either, because when you devolt or PWM trim th epower being fed to the pump, it is not able to deliver flow or pressure in the same way. 50% duty cycle will probably produce <50% of the full voltage flow. The way to find out what duty cycle you need to run it at at low load (ie, at idle) is to idle it and turn the DC down until you start to lose fuel pressure, then turn it back up above that with some extra for safety. And then you do the same thing at full load, in case it doesn't need anywhere near 100% DC. And if you're careful/caution/prudent, you will also do it at a couple of loads in between so you can shape the DC map against load. It might not be linear between the two end points.
×
×
  • Create New...