Jump to content
SAU Community

Recommended Posts

Towards the end of the year, I am hoping to import a 4-door turbo r32. I have been told by a dude at J-Spec Imports:

...all of this basically means that you will either have to wait until May

2003, or apply for SEVS approval for the R32 sedan and then find a

compliance holder that can already do R32 coupes that might be able to add

the sedan as a variant.

Anyone know who I could turn to for such a task?

At the moment I can't afford a new car, but I would like to do all the research etc now so that when I can afford it I can get straight into it.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/3102-importing-r32-4-doors/
Share on other sites

There are already some R32 sedans running around, but these were imported before the laws changed in May this year.

If you look at the current list of approved vehicles, you will clearly see that the R32 is allowed only as a coupe:

SEVS ruling - Nissan Skyline R32

...compared to the R33 Skyline ruling:

SEVS ruling - Nissan Skyline R33

This means that if you really want to import an R32 sedan you would NEED to get it approved under the SEVS scheme (which shouldn't be too hard) and then get a workshop to comply it for you ... for a workshop to be able to do this they must either put in an application to import a test vehicle for this model under the new RAWS scheme which will start in May 2003, or already have R32 coupe compliance and apply to extend their CPA number to inlclude sedans.

i saw the thread about the one for sale

I am interested in it, however i dont have the money for it yet. I wanted to do some research on r32 4 doors now so that when i have my cash i can get the best deal.

I also hear that insurance is a major bitch on skylines for people under 25, so if it's too high then I wont get one for a more years

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hello! I'm new here, I have an R33 GTST that is currently being finished up! Last year was pretty rough, blew two stock turbos so I decided to build the car. Has been down since November, but I get it back next weekend!
    • Hello, I believe my car was imported to America in the 2000s by Kaizo Industries. Would anyone be able to help me find more info on them? I've only found all the basic stuff like that paul walker bnr34, them being shutdown by feds, just stuff like that. Any help would be much appreciated, thanks!
    • I am using Motec M150.  I am not working on the car myself actually.  My workshop is giving all these info, they are quite reputable in the industry and are very familiar with Motec and RBs and have done a few big setups with VCam and single turbo on RBs.  In fact, they built and tuned my engine from day one.  But they are stumped with my engine at the moment and cannot work out how come the compression is so low with the VCam. They told me that they have now swapped in some Kelford cams (without the VCam) and can achieve around 130psi compression and the low end torque is better, but now the engine is doughy as.  It boosts and peaks at more than 1000rpm slower, with twin HKS GTIII RS, it doesn't get full boost until over 5000rpm. I have always thought the VCam was a bit disappointing at the low rpm. To a point I had to ride the clutch a fair bit to get up a small hill from stand still.  That was when I had a clutch.  Now changing to a 8HP, I don't have that luxury and this problem has become a major issue. I am beginning to think the VCam never work since the day it was installed.  Maybe it was just sitting at the most advanced point, that is why it went good at top end but very ordinary at the bottom.  Therefore, with the help of the Holinger 6 speed and paddle shift, as long as it was moving, it drove pretty good.
    • yeah, there's a country that recently started importing Skylines, I blame them.
    • I don't have a printer, but could at least attempt to make a printable model.
×
×
  • Create New...