Jump to content
SAU Community

Recommended Posts

i have an r32 gtst with a vg30 turbo, full exhaust, bigger cooler, filter, valve running 12lbs. it has a really prominent stutter up in the revs. once it hits 5000 it makes popping sound out the exhaust and power drops off, it feels like im constantly hitting speed cut (not that we know what this feels like lol) i have changed the plugs (iridium, gapped to .8), cleaned afm. it seems to happen more when i suprise the engine with boost, if im gentle and rev it slow it's ok. how can i check the coils? could it be the computer stopping the fun with boost cut?? thanks guys

Link to comment
https://www.sau.com.au/forums/topic/31055-terrible-stutter/
Share on other sites

use feeler guages to gap your spark plugs,

fuel cut is when your injectors get shut off... it feels like

similar to what your get with you coilpacks,

just the fuel cut does is one big loss of power, then it goes again.. with the coil pakcs or spark plugs it miss fires and the sprak arks out and misses the coil pack spring or the plug.

correct me if im wrong :S

:D

Link to comment
https://www.sau.com.au/forums/topic/31055-terrible-stutter/#findComment-626920
Share on other sites

could also be a boost leak somewhere, check all vacum hoses and things. If there is significant air escaping, if will sense unequal ratio in the intake, and eventually if too much cut-out as a protection measure (like you're hitting a rev limiter or similar). I've had this happen before.

Link to comment
https://www.sau.com.au/forums/topic/31055-terrible-stutter/#findComment-627954
Share on other sites

sounds like coils because when its under load.. 5000rpm ? it missfires

maby also boost leak ?

to clean the coil packs, you pull them out and take the rubber boot off, get very fine sand paper and rub the spring and clean it intill its shiny and clear of any dirty.

then put rubber boot back on and put duck tape around it.. (should already have some on it) to stop the spark arking out.

you need a tool to measure the coils not sure what its called but they should read around 0.7

:(

Link to comment
https://www.sau.com.au/forums/topic/31055-terrible-stutter/#findComment-628003
Share on other sites

thanks predator, i didnt even think about a boost leak, come to think of it there does seem to be more of a sucking noise since i put the new turbo on. maybe i didnt tie up a clip tight enough or something. if it is coil where can i pick up second hand ones? there seems to be alot of r33 coils on here but yet to see a 32.

Link to comment
https://www.sau.com.au/forums/topic/31055-terrible-stutter/#findComment-628284
Share on other sites

justjap.. you can get some coils from.

louder sucking noise ? (boost leak) - what type of bov you got ?

standard bov. but problem fixed, timing was set way too low for some reason, i thing my crank angle sensor was loose so it wound itself down. or something like that. reset it to 20 deg, with some octane boost, now its back to normal. its awesome i can now feel the new turbo properly, it just rips to the red. thanks for the info every1

Link to comment
https://www.sau.com.au/forums/topic/31055-terrible-stutter/#findComment-635377
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
    • D2 and Ksport are essentially the same thing and basically just generic Taiwanese manufacture. Better than ChinaBay crap, but... not top shelf. Öhlins have got to be some of the best dampers around, so likely to be a good option. It's going to get to the point though where I suggest you buy from Oz. We have at least 2x excellent options here. If I were you though, I'd be talking to KW about doing something for the R33. There's bugger all difference between that and the 32. In GTR land, anyway.
    • KW only offers a set for the R32 GTR. Popular options are D2 racing, Ksport or Öhlins. I have a D2 Racing coilover set, though I don't know for sure which one.
    • Well, the good news is you have more than one very good option for new coilovers in and around your country. Worth the drive over to KW to talk about GTR stuff.
×
×
  • Create New...