Jump to content
SAU Community

Recommended Posts

Hay guys I have up for sale a fibreglass remake?? of a 32gtr front lip spoiler.

It's charge speed. (stamped inside)

It's needs a small fibreglass fix.

Gun metal grey.

Looking for $200

pick up in SA only

Hayden 0401 515 676

post-71249-1267842092_thumb.jpg

post-71249-1267842295_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/310828-32-gtr-front-lip-spoiler/
Share on other sites

Umm how would you go about mounting this as it doesn't have he mounting tabs usually on the original item...?

I'd say you just screw it on with course little screws.

There's already holes in the spots you'd use.

I put a GTR lip on my GTST, you have to have the correct bar to start off with (won't just fit on any).

It has 5 slots at the front where the bolts slide in then you put it into place screw and screw the nuts on (once attached)

It also has holes on the side (about 3 each side) where you use the correct screws to hold it in place.

I had to go to Nissan to get the necessary bolts and crap (not cheap) :-(

See below for pics

post-60229-1268000558_thumb.jpg

post-60229-1268000664_thumb.jpg

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This is a story of my life things, I learned eventually (thanks to someone calling me out) that my enthusiasm for discussing and sharing ideas that it came across as arrogance and I'm like... WTF?!    One thing I'm pretty sure I justifiably pride myself on is knowing that everyone will have things they can teach you, and you're always going to find out that something you think you know turns out wrong - you just don't know what it is until you get there.   Just the bursting enthusiasm that comes with ADHD when you hit something that gives you dopamine dumps can come across like you think everyone else is wrong or don't matter. But yeah, I'm a software engineer by trade and also do tuning in weekends and 100% have long had a reputation for  quickly making connections when resolving problems or forming solutions that I've sometimes had to take people form a long walk from start to end to explain how I ended up where I did when it's seemed "too simple" when I've stated my initial case, and had the "WTF" type reaction when they've realised how much was actually considered haha.   My reward is that I get all the curly problems thrown at me.
    • Wives never seem to find things funny. Especially when they're trying to sleep, and you've found the new funniest thing ever. I've never seen someone be able to get try and be cranky with me, while they're holding back fits of laughter... 😛   Also, I tell mine it's payback anyway. She has BiPolar. So the household can get quite emotionally wild at times 😛
    • I'm not up to date on the latest, but for basic modifications like pod filter, lower springs etc you can get a modification permit at the time of inspection.  For more serious modifications you will need engineering.  Intercoolers used to fall into the mod permit rule but its been a long while since i looked it up.   Either way you will be able to get it registered, just a case of $300 vs $3k . 
    • Hi everyone! I’m the new owner of a 1996 R33 GTS-T, I’ve purchased this car over from Queensland and brought it to Western Australia and I’ve found that there is a hole cut out in the engine bay for the FMIC that enters into the wheel well (fender liners are in the boot). For anyone that has had to get their car over the PITS here, will this be a major issue?   
    • Yeah I've spotted this one too, whenever it's lotto superdraw week and I'm browsing car sales dot com for my new ride They must be dreaming, maybe it's worth 150k for the link to Brock?
×
×
  • Create New...