Jump to content
SAU Community

Recommended Posts

lol ill still beat u :)

someone organise a east meet for the 15th or 16th :)

eh, so be it. when im off my P's and buy an R32 GTR we shall see! :P

tho that thing would be so f**kin old!

so are the l28's any good?

there's not much performance gain from L24 to L28, unless you really work the engine. I mean ideally if you wanna keep the old school donk you'd wanna bore it out to a 3.1L and fit some mikuni carbs to it or someshit.

but here's reality... you nor anyone on this side of the planet will not be fucked doing all that. so just keep the shitty engine that's in it till it carks it from a cracked headgasket or soemthing and then throw it out, find another engine and repeat the process till you can afford a better car.

here are your order of priorities:

1. get car in registerable condition

2. register car

3. make sure it drives OK

4. modify it or think of changing engines

now stop being a retarded dickbag with grand dreams when all you've got atm is a shitty rusted out car that's not even on the road.

Thats the time frame I'm there lol. Hopefully it's the last interstate work I have to do for a while.

Been to Perth, Launceston, Brisbane and Mackay in the past 5 months. Add another Brisbane to the list as of next week.

my flight was to mackay and then a 5 hour trip up north just off cairns. The humidity was a killer up there. More water than oxygen. 24/7 Aircon in the car and at the house lol

Funny to see people having water hoses running 24/7 watering a patch of dirt. No water restrictions up there.

A damn!

That's awesome!

LOL! Kris loves China Bar.

I would have came but I only got on SAU while you were all heading out, + I needed sleep after NYE.

Kris doesnt love China Bar as much as I do. I wasn't going out for Rock Kung at that hour...pfft.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • The cross sectional area of a circular hole scales with the square of diameter. So a 2mm diameter hole is 4x the area of a 1mm hole. Not double. The 1.7mm hole is nearly 3x the area of a 1mm hole. You do not need restrictors at both ends of the oil supply line. If you have new, additional restrictors at the turbo end, that you did not have before, then you do not need a restrictor at the inlet end.
    • Hi all. Been a while but things are moving along. I just have something that I am wondering about. Since I will use OEM turbo oil pumbing, I got myself a new bolt, the one that goes into the engine block oil feed. As I recall (and see visually) this bolt comes restricted with I think a 1.7mm hole? Not quite sure but it was something around that size. The turbos have 1mm restrictor bolts installed, as necessary due to ball bearings and my higher oil pressures. Can I now just use that OEM bolt with the 1.7mm hole in for the engine block or will this actually be too much oil flow restriction and I have to drill it out first? In my head it would make sense for the bolt to be at least 2mm wide as both turbos take "1mm of oil flow". Do let me know if my logic is flawed here, I just want to make sure I don't kill my turbo bearings with too little oil. Don't know if I can trust the saying I read somewhere that ball bearing turbos essentially only need an oil mist
    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
×
×
  • Create New...