Vic Wasteland Thread

[funkymonkey]

ah ok, the guy at importmonster told me that the offset difference wouldn't matter for GTR?

if the wheels are the same width, but have different offsets, then that's fine.

if the wheels are staggered, and the total rolling diameter of the wheel including the tyres is within 1% of each other, then that's fine too.

anything else will cause issues with ATTESA.

[UNR33L]

that red GTR looks mean!

so 19 x 9.5" +11 and 19 x 9.5" +21 if i put 255s on all 4 that would be completely fine?, might offer him 2.5k

[funkymonkey]

that red GTR looks mean!

so 19 x 9.5" +11 and 19 x 9.5" +21 if i put 255s on all 4 that would be completely fine?, might offer him 2.5k

no. you'll run the risk of fouling on the front suspension as it sits a few mm further in than normal, and it'll be about 1cm inside your fenders, so you'll ed up with flushness fail. you can run spacers if you want, that'll fix your issues, but for $2.5k I'd want it to be fucking on point to start with.

those wheels are supposed to go on V35/V36/Z33/Z34, not GTRs.

[UNR33L]

ah lame, so they wont work

i think he said he was spraying some TE37s in black 18x9.5 or 10 i cant remember but +12 all around for 3k..

[funkymonkey]

It'll work if you run spacers, and I'd only run spacers on wheels I buy for less than 1.5K. Anything more than that and I take my time to make sure I get them in the right offset, or I'm prepared to alter the car to make em fit if they're too epic to pass up.

[Rekin]

spent today at work taste testing rum and raisin chocolate

Not a bad way to to go through friday work haha

[jezza boii]

What exactly is your job description Pat? Good pay for eating chocolate or nah?

[UNR33L]

http://www.skylinesaustralia.com/forums/Vo...html&hl=gtc

your professional opinion Shan?

pat, where do i sign up?

[Rekin]

What exactly is your job description Pat? Good pay for eating chocolate or nah?

haha im a process engineer at the research & develop. department within cadbury

Just started so im still going through the induction crap but I put my hand up for as many taste testing sessions as possible

[funkymonkey]

close, but won't be flush on an R33 GTR... but we all know Matt's a princess when it comes to his bling bits so they'll be mint at least.

[UNR33L]

they will be flush enough wont they? lol your so picky

[blags]

They will be more than good enough for a GTR.

Not many gtr's going around with epic stance anyway.

[alr33x]

You tried going up your driveway on an angle / sideways?

yehhh doesnt really help man haha.. its technically too low but i dont believe in such a thing u goin gor?

[alr33x]

why dont u buy the guys gtc's that are gtr fitment for sale on this forum? off his r34 i believe will look tough.

[KURAUN]

yeah he was looking at them

but if they fit a 34 gtt, then needs MOAR offset

[alr33x]

arent 34 guards bigger then 33?

[Basti]

barely, but that is talking bout gtst vs gtt. r33 gtr guards are bigger than gtt and about on par with r34gtr

[jezza boii]

haha im a process engineer at the research & develop. department within cadbury

Just started so im still going through the induction crap but I put my hand up for as many taste testing sessions as possible

Ah nice. Sounds like a good job.

[UNR33L]

Well Matt has GTR front end i think anyway including quarter panels(at work cant see pics at the moment)? and seems to fill that out nicely as for rears i thought he had to pump / roll his out a bit 10" with +15 i would of thought they would look hot on a 33 GTR? might give him a cash offer so Matt takes care of his bling bling? haha

On a different note i want to buy one of those 33 GTR rear defuses, carbon fiber <3 $500 from psiparts

[funkymonkey]

they'll look hot, but they won't be flush.

ah fuck it, you'll probably never lower your car to epic stance anyways, so nobody will notice that they're 7mm further in than they should be.

he better be giving away a free reacharound with em at $3700 tho. or at least offer to cup your balls for a solid 5 mins.