Jump to content
SAU Community

Recommended Posts

My car is fine :P I only thought it was broken because these stupid wheel alignment people told me it was.

Hmm.. Going to order coilovers now.

BC BR Series - $1300 NEW

or

Tein Flex - $1100 USED

?

ive searched the BC's for the evo on evoOz and a lot of guys are running them as entry level coilovers for track and for just normal street driving

and all really good feedback from them

i actually rode in an evo 7 last saturday that my mate was looking at buying that had the BC's 8k front and 6k rear springs and with the damper turned down it was like driving a normal car, couldnt even tell it had coilovers

it was even less stiff than my standard shocks with tein s-tech springs, but then you can adjust it to be really stiff

what wheels did you get Anf? those work ones you linked?

yeah they are wed kranze ERM's

damn dirty though!

ill take a pic of one i spent about 3 hours cleaning last night and one i havent cleaned

need to buy some new rubber for them tho :D lol

taken on iphone so sorry bout quality

so much dirt and tar im guessing it is

how they started

img0696ks.jpg

after alot of elbow grease + a cleaning product called gumption which is some multi purpose cleaner (tried heaps of other things i have laying around and wouldnt get through any of the dirt even tried a tiny bit of degreaser on a tooth brush and didnt do a thing)

after a few hours

img0695zg.jpg

and how the front of them look

img0694o.jpg

going to need to get the gutter rash fixed up but to be honest much nicer than the stockies :D

same spring rates as my monoflex

and i love the ride even know it can be very firm at times around the shit melbourne roads..

im guessing u had super streets cos they are

F : 4kg/mm

R : 4kg/mm

?

i cant even imagine what they would feel like driving around the shit roads say around toorak / prahran..

same spring rates as my monoflex

and i love the ride even know it can be very firm at times around the shit melbourne roads..

im guessing u had super streets cos they are

F : 4kg/mm

R : 4kg/mm

?

i cant even imagine what they would feel like driving around the shit roads say around toorak / prahran..

i run greddy 6/8 coils wound all the way up around that area every day....

niggas jus need to man up!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
    • Yeeeppp, been following a lot of the testing on the latest Xona stuff and there are some mental results.  He also went over 1000hp @ 4 hubs on his Mainline with a XRE6364S (63mm) which was also well into the 20psi range before 4000rpm on a 2.5. Crazy stuff. Fwiw the XRE5964S is basically the modern equivalent of their old HTA3582 - would drive nicely enough on an RB25 or 26, but proven capable of a huge amount of power if you want to spicy with rpm tho even at sane boost levels will make stout numbers 
    • The axels in my R33 seem tired, and have a bit of play in them. I cannot find any new of course, not interested in buying used, but I am looking to see if anyone can identify some cross compatible axles. In the states I have seen suggested for S chassis the J30 axles, however for the skyline (as best I can tell) the lengths are about an inch off (2.5cm) on both sides. R33 my measure L 22" R 24.5" GPT L 22.5" 24.25" J30 L 23.5" 25.5"  so shaft length is probably an inch wider. Not sure if someone has another still remanufactured option besides the J30. I figured worst case I can buy a pair tear them down and swap the center shaft. My other option was reaching out to GSP to see if they cannot piece together a set, since the axle stubs are still manufactured, I wouldn't think it be that hard to find a shaft or make a shaft work. 
×
×
  • Create New...