Jump to content
SAU Community

Recommended Posts

Gtr got rear ended last night by some hyundai POS.

Just went to miscolor for a quote, 3g in damage to the rear.

Why can't people watch where they are F@&king driving.

could be worse. Mazda did same to me n he quoted me 6800... Which is why my insurance told me to go to a cheaper place heh

Technically you only need hub rings to install wheels. The process used to be that you put a hub ring on, tighten the wheel, then remove the hub ring. This ensured that the wheel was perfectly centered once the lugs are tightened. If your wheel is moving around after the lugs are tightened then you should be more concerned about the play in the wheel, the lug or the bolt.

Your wheels are either hub centric (centered using the hub) or lug centric (centred using the lug). most jap wheels should be lug centric with a wider hub hole to allow for varying axles.

So you'd kinda sound like a tard if you went to a tyre shop and told em that you want them to leave the centering tool in it after they're done. "Oh yeah, leave the cast on my broken arm on after it's healed, it adds strength to my arm".

Hub adapters on the other hand need to be hubcentric, as they aren't as lug centric as wheels are.

Lug centric wheel + lug centric hub adapter = fail

Lug centric wheel + hub centric hub adapter = win

Lug centric wheel + hub + no hub ring = win

Hub centric wheel + hub + no hub ring = fail

Hub centric wheel + hub + hub ring = win

kapish?

i was under the impression that hubcentric rings transfer load from the wheel to the hub directly instead of the lugs taking the force and doing stuff they arent supposed to do

like what? hold your wheel? that's what they do. that's all they do.

if your wheels are tightened properly and centred properly while being tightened you shouldn't need hub rings. unles syou have a hubcentric wheel. which I doubt, cos this isn't the 80's.

you need a hub ring, unless skylines are different

i had a wabbly as f**k wheel one day after i got some tires, and the installers left the hub ring out, once they put one back in the wheel was fine

this was on a honda civic

you need a hub ring, unless skylines are different

i had a wabbly as f**k wheel one day after i got some tires, and the installers left the hub ring out, once they put one back in the wheel was fine

this was on a honda civic

that wheel was probably not lug centric?

you guys realise that the need for hub rings is totally dependent on the design of the wheel, therefore whatever experience you've had with your wheel may not apply to his wheels right?

here...

lug typical of a lug centric install:

conenut.gif

lug typical of a hub centric install:

shank.gif

the former transfers tension onto the wheel AND the stud, whereas the latter puts tension onto the stud ONLY. In some cases running a hub ring on a lug centric wheel can actually be dangerous as you'd be counteracting the tension on the wheel by the lug needed to centre the wheel, and instead putting stress on a part of the wheel NOT designed to take tension, i.e. the centre.

2005-01-08_021.JPG

left: lug centric.

right: OEM hub centric

It's not a matter of "to be safe", ask yourself if you're putting tension on the part of the wheel that was designed to take tension. I'm sure you'd love your wheel to start fracturing from the centre where it may be weaker.

Ok, that seems reasonable - but most hubs would be appear to be hub centric, having a built in hub ring - which would imply the studs aren't necessarily designed to take the full weight in shear, otherwsie why have the hub ring on the hubs at all?

Ok, that seems reasonable - but most hubs would be appear to be hub centric, having a built in hub ring - which would imply the studs aren't necessarily designed to take the full weight in shear, otherwsie why have the hub ring on the hubs at all?

To centre it properly while being installed. IF your wheel needs a hubring, it will come with them. All aftermarket manufacturers supply locating rings for their wheels if they are needed. Lugs by themselves cannot centre a wheel properly, which is when you need a locating ring to centre it. Some wheels are designed to have this ring left after installation, others are designed to be removed.

Technically you only need hub rings to install wheels. The process used to be that you put a hub ring on, tighten the wheel, then remove the hub ring. This ensured that the wheel was perfectly centered once the lugs are tightened. If your wheel is moving around after the lugs are tightened then you should be more concerned about the play in the wheel, the lug or the bolt.

Your wheels are either hub centric (centered using the hub) or lug centric (centred using the lug). most jap wheels should be lug centric with a wider hub hole to allow for varying axles.

So you'd kinda sound like a tard if you went to a tyre shop and told em that you want them to leave the centering tool in it after they're done. "Oh yeah, leave the cast on my broken arm on after it's healed, it adds strength to my arm".

Hub adapters on the other hand need to be hubcentric, as they aren't as lug centric as wheels are.

Lug centric wheel + lug centric hub adapter = fail

Lug centric wheel + hub centric hub adapter = win

Lug centric wheel + hub + no hub ring = win

Hub centric wheel + hub + no hub ring = fail

Hub centric wheel + hub + hub ring = win :P:):D:banana:

kapish?

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Latest round of updates on the car. I purchased and installed a SWS clutch slipper to help with 60ft times and got some second-hand good condition 275/40R17 Hoosier DR2 radials. Test and tune in November showed the tyres were an upgrade over my over 15 year old mickey Thompson's and I got a 1.8 second 60ft and pb et of 11.71 but even then, that run wasn't great due to rain and driver error (the event got called off 10 minutes later fast forward to the weekend just gone 25th of Jan and there was finally a break in the weather to let racing happen. The first run the track was slippery and only managed a 12.1@129 Second run the track was better and got a new pb et and mph: 11.54@131   Lith and I then worked out that I installed the previously mentioned clutch slipper incorrectly and its never been working, and I had just been dumping the clutch the entire time, we also noticed it was on street boost and not race boost. So I lined up for a third run with the car turned up in the first two gears, but the passengers side axle objected to clutch dumps and left the chat which stopped my weekend.   so there will be another attempt in the future once I replace the tyres as they rubbed and are stuffed now. but a low 11 should be on the cards.
    • Ceramic coating and heat shielding, you mean?
    • Turbos don't require pulling the motor apart so that's "easier". I would recommend the Nismo R3 turbos instead if you want to do stock twin turbo. It doesn't make as much power as the 2530s but it's only like ~50 whp off the mark and should have better response (ball bearing CHRA, slightly smaller turbo). A local that went with a Garrett G30 and 6boost manifold recently nearly burned his car to the ground after the hood insulator started melting and and burning so if you go single turbo I recommend doing a lot of research and validation work to make sure you don't do the same.
    • New rear lights, filler panel sprayed, cleaned and back together    before, during, after shots 😍
    • 100% is gyprock, I agree. Slip of the keyboard. Haha! I left my indicator bulbs out to save a bit of weight.
×
×
  • Create New...