Jump to content
SAU Community

Recommended Posts

saw a ferrari driving in the city with arab numbers plates on the front and back O_o

Too good for vicroads plates lol. I guess the fine for not displaying plates is toilet paper

you can drive on international plates if you have a permit.

At least there was no similar car nissan aus supplied to skylines etc

what do you call 200sx's and 300zx's?

manufacturers like toyota/nissan are more protective of their family and entry level sedans (maxima/tiida or camry/corolla) which they sell by the hundreds. No import quantity will ever scratch that. Keep in mind that each RAW can only bring a total of 100 cars in a year per category. They make 10 times that in a week.

They only get shitty when you start bringing in vans as campervans, or 15 year old imports that are as equally feature rich as their new cars etc and start cutting into their markets in a major way.

Just looked at 300rwkw R33 gtst (turbo is Blitz K5-660) goes pretty hard, in coming days I'll contact the mob who built it as the motor is forged (seen the receipts).

Noticed couple of things, there's a sensor on inlet pipe (next to BOV which is blocked) and pink label afm (it's R33 S2 and running on Power FC), hence my curiousity.

Wasn't a d-jetro PFC was it? Unplug AFM and she if she starts?

Wasn't a d-jetro PFC was it? Unplug AFM and she if she starts?

No d-jetro for ECR33 though, but after work, I'm off to Amberley Autos and talk more about all this.

Btw, you got address for Trents new shop? PM me if you have to.

so there are now unmarked revenue raisers cops on unmarked red motorbikes wearing black leathers that hide on the side of the road and pin you for driving offenses....

using hand held device - 3 points - $239

fml

Thanks for the reasonable response.my husband and i love the car, we have a car but need one more cos we work at different area of the city and its kinda far from our home, i am very happy with the present condition of the car as you stated and we promise to take good care of the car as i knew no doubt about it. we have just relocate to beijing china, and we want the car to be ship to china so we will not be able to come over and inspect the car. so we will like to see more pictures of the car. as for the mode of payment we will be paying you via bank transfer, and also i have registered with a shipping company which would come for the pick up after payment pls get back to me asap Regards

ummm.... she asks if car is still available. i get this. lol

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Can you log IAT? Whilst WTA coolers have their place, doing any sort of sustained run is not one of them There are fixes that slow down the heat soak, like ice boxes, which don't last that long, and interchillers, which are fairly expensive, up grades to the WTA cooling radiator, which may require a bigger pump, and upgrades to the reservoir size,  and upgrades to the cooling fans, but, it all still heat soaks, and takes ages to come down in hot weather  For a turbo, that isn't locked into WTA like my PD blower is, can you not possibly swap to a nice air to air intercooler????, it would be better for sustained runs then, and have alot less things that could go wrong in my opinion 
    • So, the other thing I've sorted is a baseline dyno run up at Unigroup's new location. The auto trans was a little unco-operative by both shifting down when the throttle was floored on the dyno (so Mark had to ramp it up more slowly than in a manual) and also by shifting up at 6,000 even in sports mode instead of the indicated redline of 7,000 Still, on a hot day it made 240rwkw at 16psi which seems about right for 300kw (400hp) through an auto at the wheels.  The shape of the curve is not quite right because it was not full throttle to about 4,500 to stop it kicking down, but until I can get a tune on the auto trans control this was the best we could do.....full boost will be well below 5,000 once that is sorted, I'll get some data logs when I can to confirm For comparison, the R32 made 255 at 12psi (at 4,500) on the same dyno with tune, n1 turbos, cam gears, big exhaust but otherwise all standard so the v37 is likely a little better out of the box. One thing that is very clear is that the standard water to air intercoolers are not up to sustained use at full throttle in warm ambient temps. After about 5 runs (so only a few minutes full throttle), it was pulling boost and timing and dropping 10-15% power. Unfortunately I didn't get that printout and the Unigroup guys are away at the moment, will try and get hold of it on their return. So, looks like a healthy engine to start modifying and the only real area of concern is the w2a heat exchangers which the aftermarket has plenty of solutions for    
    • I maintain it actually looked really nice in person. So much so that I thought "No, this is illegal" but there it was, clear as day. I think we can easily call the wing and wheels/height to be transformative. Not saying it's better than the GR Whatever, or the 86, or the WRX STI or anything of that sort (the internet says it all bolts up so you can buy best of all worlds?) but it's still at least a thing and not nearly AS bad as people say.
    • That's less offensive than the previous gen.....except for all that ugly black tupperware around the edges. Blerck!
    • I leant out the window recently and took a picture of this new WRX. It looked real damn fine in person. It's faster around a track (stock) than a (stock) GR Yaris. It's much more practical despite being heavier. It's significantly cheaper. This gen tunes really well, much better than others. .... I think they're probably a lot better than people expect.
×
×
  • Create New...