Jump to content
SAU Community

Recommended Posts

boot2u.jpg

dmax boot and roof spoiler yes plz

only if your going the full look like this guy, id say gtr front bar and spoiler + lows is better

probably just knocked the cable going from the PTU to the coilpacks a bit. engine moves when under load, just enough to cause a break in signal.

yeh took it out this morning up an down the street full acceleration no issues, apart from shittty neighbours id suspect

i need a service plus my front pipe put on and my new tie rod ends and some new suspension bushes also new engine gaskets installed. soo... who wants to do it :)

Front pipes is an easy job if you have ramps. Tie rods are easily replaced too but will require an alignment. Engine gasket is heaps of work. I'm lazy lol

my niggas

had someone call sayin they have an S1 GMG r33, LSD coileys has a dent in the back quarter (where a pod will be fitted)

dude says one of the lifters is noisy and its auto.... soooo how hard is a manual conversion and how costly would it be to fix the lifters

my niggas

had someone call sayin they have an S1 GMG r33, LSD coileys has a dent in the back quarter (where a pod will be fitted)

dude says one of the lifters is noisy and its auto.... soooo how hard is a manual conversion and how costly would it be to fix the lifters

goddamn you're a deadset dropkick. hasn't buying one shitty auto and dreaming of converting it to manual taught you anything.

take the money you'd spend on the 33, add 1k to it and then buy a manual instead. rather than buy an abused auto and spend 3k converting it to manual.

seriously, you're living proof that Darwinian theory doesn't apply to humans anymore.

goddamn you're a deadset dropkick. hasn't buying one shitty auto and dreaming of converting it to manual taught you anything.

take the money you'd spend on the 33, add 1k to it and then buy a manual instead. rather than buy an abused auto and spend 3k converting it to manual.

seriously, you're living proof that Darwinian theory doesn't apply to humans anymore.

Well the r32 is hard enough to get rid of. And I need a car ASAP

Their bog slow and I have an auto license so I dont mind if it's auto or manual.

Another offer was for an 06 bf falcoon wagon lol

I'd rather buy a bike what can 4-7k buy you for the car a kit and some rims? :domokun:

Maturity kickin' in yo - shouldn't do the gtr up >_<

Just a bit of a personal question - you guys/gals that are 25 ish renting or got a house? or still living at home? and to add those that do have a house what age were you when you moved in and was it with a gf / wife / a Mohsen?

I'm still living at home myself but thinking of just saving in the next few years for a deposit, have 25k of commonwealth bank shares atm so it would help with the initial saving

26, 27 this year. Live with my inlaws, have been for about 5 years although I've been with my partner for 10 years. We bought land last year and will likely start building this year.

26, 27 this year. Live with my inlaws, have been for about 5 years although I've been with my partner for 10 years. We bought land last year and will likely start building this year.

Cool :thumbsup:

In other news, wanting to go to winton next month for sau championship - how hot can my engine oil get to safely? because I probably wont have oil cooler installed by then so was thinking of doing hard lap then 2 slow ones or something? or am I being to soft I do notice the gauge go up a fair bit during a hill run when i'm not even pushing the car that hard at all is 140 ish safe to be running on?

140 would be max. But u may find it a bit cooler on the track with 2 laps. We r talking about 5mins max on load. Not. 10-15 min moutain run.

No cooler is not ideal, but safely safely as she goes would be the plan. Catch tank for gtr is what u want tho, from what ive seen the stockers blow a bit (5-6 have done this, u end up with oil dripping from the pods)

My gtst never got over 100deg with the cooler.

Hamish that is hawt!!!

Also i run down a smurf, ran him through the blender and he is know lubing my gearbox :P

Skyline possibly gets inspected this Sunday when I get back from DECA. I say possibly. Hopes are not up too much given track record and I'm starting to sound like Mohsen. Please cross your fingers for me :)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • What can't be done with a little bit of decking board or similar timber bolted to a hub flange via 2 wheel nuts is not worth talking about.
    • I noticed something. On the tps sensor and the sensor behind the adjustment screw is adjusted towards the far left. Are these screws supposed to be centered? (this sensor was in the same position before the tune as well)  Also attached a photo of where my car usually idles at when warm (sometimes a tiny bit above that). I think I might have screwed up the calculation and it might have better than I thought lol at 750rpm still not 650rpm though.      
    • So for both general interest of engine health, and to rule out any coolant/oil issues, I organised an oil analysis done on the 125,000klm oil Results below, all good, just a bit of fuel dilution which I'm not too worried about
    • This is actually a really good way of measuring what wheels fit. If only there was a similar measurement between hub face and suspension :p That said, it's probably pretty simple to actually measure it all with the wheel off the car for the rear. The front is a bit more complex but.. 
    • Being the top Google search result for R34 wheel-related inquiries, lemme throw down my experience. I calculated that 100mm from hub face to wheel face is about the perfect fitment for my ENR34 sedan.  I've been running 18x8.5s, ET35, with a 1" spacer. So, 8.5in to mm = 216mm. 216/2 = 108mm. 108-35 = 73mm. 73+ 25 (1" to mm) = 98mm.  If you wanna get close to this on dif widths, here are the offsets you'll want: 9" - ET around 15mm 9.5" - ET around 20mm 10" - you're crazy, but ET around 30mm All these should fit perfectly on a non-widebody, non-GTR Skyline. Note that it's probably the absolute max, and you're probably better off running a couple degrees of camber in this config, but it looks great, super flush.
×
×
  • Create New...