Jump to content
SAU Community

Recommended Posts

I'm planning on running antilag on my R32 gtst targa car. I'm running a RB26 throttle setup (using the RB26 injector plate, through to plenum), will the aac valve flow enough air on closed throttle to run antilag properly, or will i have to prop the throttles open/run kicker soleniod/run bigger aac valve?

That thread is useless. This guy is using it for a Targa car and is asking a legit question! I have only used Group N on my car so I cannot help.. Interested in knowing what you find out though

That thread is useless. This guy is using it for a Targa car and is asking a legit question! I have only used Group N on my car so I cannot help.. Interested in knowing what you find out though

So did you have the throttle jamed a certain % open, or use a throttle kicker?

I'm running a Haltech Platinum Sport 2000

Yeah i opened the throttle to 15% and i use the vipec ecu with cycle idle

So did you have the throttle jamed a certain % open, or use a throttle kicker?

I'm running a Haltech Platinum Sport 2000

The AAC doesn't allow air enough for proper anti lag - your talking 40degrees retard to get boost at idle plus you want at least 2000-2500rpm if not more. I would be selecting another ecu as well - something that has a proven track record in group N - like Autronic or Motec. You really want closed loop boost control as well - to limit overboost. A "throttle kicker" maybe the best way as you only need a small change in tps to get a large change in airflow when you have 6 tb's.

I'm not expecting boost at idle, just trying to bring to take a chunk of lag out of the poor rb20. I'll give it a crack with the aac first, who knows may be surprised. At the end of the day it's pretty easy to prop the throttles open with the rb26 adjustible linkages.

I'm sure the Haltech will be fine, it has closed loop boost, all the antilag settings for antilag retard, fuel, rotational idle...ect. Alot of cars down here (tassie) are running Haltech. I'd rather stab myself in the face than use the Autronic software, and i'm not morgaging my house for a motec.

Hey I dont mean to seem like I am hijacking here. But to get a bigger IAC valve, what would you get?

My stock IAC doesnt have anywhere to go on the current plenum I have. Was wondering if I got a different IAC (brand, shape, size etc), is there one that would just would work with the stock wiring loom. Granted I may have to wire a different plug onto the end of it.

Also is there one that will simply attach via a tube so I can connect it to the plenum via a hose instead of having to get the plenum cut and thread tapped into it to bolt it on?

Sorry about the slight hijacking.

Hey I dont mean to seem like I am hijacking here. But to get a bigger IAC valve, what would you get?

My stock IAC doesnt have anywhere to go on the current plenum I have. Was wondering if I got a different IAC (brand, shape, size etc), is there one that would just would work with the stock wiring loom. Granted I may have to wire a different plug onto the end of it.

Also is there one that will simply attach via a tube so I can connect it to the plenum via a hose instead of having to get the plenum cut and thread tapped into it to bolt it on?

Sorry about the slight hijacking.

i had this issue so i used a pice of 6mm alloy and made a plate for the alve to bolt onto then i got a 5/8 weld on fitting welded on to the 6mm plate. walla. i can mount the idle valve where ever. its just a matter of plumbing it in.

i had this issue so i used a pice of 6mm alloy and made a plate for the alve to bolt onto then i got a 5/8 weld on fitting welded on to the 6mm plate. walla. i can mount the idle valve where ever. its just a matter of plumbing it in.

Ahh ok yeh that sounds like a good idea :no: Should give that a go.

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Just buy a BMW if you want that... You can then choose whatever engine of theirs you want 馃槢
    • Clear vinyl wrap or clear coat? 
    • There really needs to be an ODBII item that can play intake noise through speakers, synchronized with your current RPM and TPS%.
    • Worth most of the $50k alone!
    • So, we now have a straight and clean boot lid inbound and the car goes in for paint, again, on Wednesday, and will be ready on Friday, all ready to get cams and stuff on Monday  And by straight and clean.....I mean a brand new OEM one that cost..... $1300....馃槳 Sadly there's no clean undamaged used soft top version available, plenty for the power retractable hard top versions though, which is arse and makes Mark have the sads I could have waited longer, until a NC sort top boot lid eventually turned up, but I'm sick of waiting and said fark it and made it rain cash, meh In other naturally aspirated news, one of the guys at work brought in his old Corola which had a 4AGE in it, really nice clean car with lots of mods, including ITB's, man that things induction noise sounds sick with all of the dorts that makes you smile......maybe the NC needs ITB's, yeah, basically for the noise they make, but they're pretty expensive, but, they sound so damn good I may bring this up when I drop the car up on Monday, and by may, I mean I will馃ぃ馃馃お馃ぃ
  • Create New...